AutoCAD Inventor :: Adding New Part Units
Jan 11, 2013
I using code similar to add a new part to an instance of Inventor, and it works OK. The problem is it is using the Metric Template instead of Imperial Template. I have check and confirmed my application preferences and they reflect "inches". Inve is the Variable name for my Inventor.Application.
View 2 Replies
ADVERTISEMENT
Aug 6, 2012
I am trying to programatically update Units of Measure on a part or document through Document Settings, but the changes are not reflected. I cannot save the file, because the file is a result of import, so I want to leave it up to the user. During import, I am recognizing what type of units the import file has, and I need to impose them on the document, and immediately show. I cannot use templates. There is a similar issue when the Units of Measure are updated manually through the screen, they are not reflected.
View 3 Replies
View Related
Mar 20, 2012
In the hole command i am trying to place a clearance hole for 10-32. When i click on teh clearcne hole icon it says loading therad data please wait and then nothing happens.
View 6 Replies
View Related
Mar 30, 2012
First, is there a way to add a new part to an assembly and it only be added to the active Level of Detail (and the Master, of course)? It is adding a significant source of potential error when adding a part to an assembly when you have to make sure to go back and change the status of a newly added part in each Level of Detail.
Secondly, is there a better solution than using Levels of Detail in the first place? We typically have assemblies that are in a few stages: 1) an empty shell 2) shell with ballast 3) shell with ballast and fill material. I have started using Levels of Detail to suppress components at each of those 3 stages because it is important that we have accurate weights for each stage. Our assemblies are not terribly large so memory usage is not really a problem, and I have read on Levels of Detail it is usually useful in a memory management situation.
Lastly, is there any good reason to not be able to save a Level of Detail when there is a positional representation active?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
View 6 Replies
View Related
Oct 12, 2011
I am having trouble adding a sketch which is on a dwg file to my sheet metal part. First I created a flat plate sheet metal part.
I also have a sketch on a dwg file that I am trying to transfer to the surface of the sheet metal plate. I initiated a sketch on
the sheet metal part thinking I couls open the sketch on the dwg part and do a copy and paste. That did not work.
Second I tried to insert the dwg file but when I search for the dwg file under the insert function, there are no dwg files shown.
View 5 Replies
View Related
Apr 29, 2012
I am finally getting time to do some organizational cleanup and management with our templates and vault settings. Many of the things are items that I am altering for each drawing/model I make and I would like to make them "stick" for the company standards. Things like altering font size in the styles library, adding part dimensions to the parameters for the parts list, and creating a new content central library where our part numbers are already populated for the parts list and the structural shapes have datum planes in the middle rather than just at beginning and end.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
View 2 Replies
View Related
Jul 17, 2013
I have a wire trough that we typically use on all our units. Instead of modelling each trough as it's own separate part to length, I would like to add this part to frame generator for tracking there cut lengths etc...
A few items, there is two sizes that we use, but for now I will work with just one.
I have modeled the part and renamed the important parameters.
-WIDTH - stays the same
-HEIGHT - stays the same
-LENGTH - adjusted by frame generator
-RIBS - the part has 6 currently, but there is a rib added for every 1/2 inch. it is a rectangular pattern
-SLOTS - will be added to the trough every 2 inches of length, it is a rectangular pattern
-SLOT_DISTANCE - is 2 inches and never changes, if the trough is cut on a slot, which ever is easiest, to show half a slot or none, doesn't matter, this is just for a visual and BOM reference
I found a video that shows me how to publish parts to FG, but I am stuck for the iLogic part. Part attached.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 6 Replies
View Related
Nov 20, 2013
in iParts factory I would like to create part ## by setting common name and adding to it different values drawn from part parameters.
Please refer to attached image – common name in that example would be “DRILL” and description of the diameter and length automatically taken from parameters in columns “DRILL_D” & “INSERT_L”.
View 3 Replies
View Related
Dec 18, 2013
Is there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
View 1 Replies
View Related
Nov 27, 2013
I have a block that when I extend it, a new 10' section is added. It will only add the 10' piece (array). What I am looking to do is find a way so that once I hit a total distance have it switch the part that it adds. So I have like a rail, I keep adding these 10' pieces and then once it hits 40' I want it to add the end piece which is different.
View 1 Replies
View Related
Nov 15, 2011
I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
View 7 Replies
View Related
Mar 28, 2012
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies
View Related
Dec 28, 2012
The part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies
View Related
Apr 1, 2013
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
View 5 Replies
View Related
Dec 11, 2013
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
View 6 Replies
View Related
Nov 15, 2013
New user 2014
Part created in assembly does not update to part file.
View 9 Replies
View Related
Mar 29, 2012
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
View 7 Replies
View Related
Jul 1, 2013
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies
View Related
May 4, 2012
convert the part that I have drawn to sheet metal. I have tried to make the part from sheet metal and it did not work out at all. I have attached both versions of the part.
View 1 Replies
View Related
Feb 14, 2012
As soon as I open a piece or try to make a new piece, it crashes! I can open the program but can't use it! I installed it and activated it and I can't use the program at all. I have sent many error reports beacuse I have opened it many times and had it crash many times and have always given my email address. Attached is the Error Report Details screen shot.
View 3 Replies
View Related
Aug 29, 2012
In previous releases (2009 i think) when i converted a standard part to a sheet metal part i could recall all the sheet metal styles by linking back to the sheet metal template (i can't remember exactly how this was done, but it was possible with one operation)
In 2011 i canot find a quick way of doing this, it looks like i have to open the sheet metal template and export each different style (about 40 of them) and then import each one into the converted part. am i missing something? is there a simpler way similar to how it used to be done? Why have Autodesk made this more difficult?
As it stands at the moment it would be quicker for me to remodel the parts from scratch using the sheet metal template. I know this is the obvious solution, but seems strange to change something that worked well to something that doesn't!
View 6 Replies
View Related
Oct 23, 2013
I order not to hide components, i want to make a break sketch and remove a piece from a part from an assembly in the isometric view in a drawing. can i do that?
View 4 Replies
View Related
Apr 3, 2013
I have a structrual rectangular tube as shown in the picture below. I need to fold the four flanges inward to create a sort of point or pyramid.
View 9 Replies
View Related
Sep 11, 2013
The simple question is… how can we insert a step (stp) part into an existing part file?
The story behind the question is this:
Normally when we get a step file assembly from a customer, if the part has changed, we put our part into Old Versions and save their new step file as our ipt number and replace it in our assembly file. With Vault, in order for us to maintain the history of the part files, we need to keep the original file so we can’t just delete it or replace it, so now we need to figure out how to get a step file into an ipt. The Import command on the Manage tab (with 2013 at least?) does not allow import of stp files just yet.
The only other option I can think of is to put the original part into an assembly with the step file, create a copy of the step information in the part file and use it to recreate the new (step based) part.
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
View 1 Replies
View Related
Mar 11, 2013
I'm modeling a temperature gauge and would like to have glass over the gauge so the inside is visible. I can easily do this with an assembly, but I'm wanting to do this with a single part. I tried to derive a new part from the assembly, but the transparent part turns solid so nothing inside is visible. Is it possible to do this?
I've include pictures of what I want and what I end up with.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 9 Replies
View Related
Apr 11, 2013
Some times we use standard parts which we could not find in content center. We creat part ourselves. But it looks like standard part in BOM or part explorer window...
I want to change type of part to PURCHASED type and icon like other purchased parts like bearings or bolts...
Is this possible?...
It can be also assembly parts like bearings. Bearings have many parts but it looks only one part in part explorer. This is very good. I want same thing too...
View 9 Replies
View Related
Apr 1, 2013
I have created the part based on piece of standard angle taken from library. Now I want to make a mirrored copy of this part by Component-Mirror.
Inventor does not let me do it with standard part.
The question is: How I can transform a standard part to normal one, I mean I could get rid of belonging to standard part? Making a copy does not work. The only way is to derive and mirror this part but I wish there could be easy way.
View 9 Replies
View Related
Aug 20, 2013
If I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
View 4 Replies
View Related
Feb 19, 2012
Is it possible, if you have a merged BOM.row to get the total quantity of each part?
inventor professional 2011 / 2012 / 2013
View 4 Replies
View Related
Feb 7, 2013
I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
View 2 Replies
View Related
Oct 4, 2012
To create my new part, i used the deriven part of another part, and used only ‘Body as work surface’ before inserting in my new part.
When I create the drawing of my new part, why is it that I still see all the ‘Body work surfaces’ of the direven part?
When I make it on my other computer I dont see it... so it is surely an option…
View 1 Replies
View Related