I am trying to use the 3D line tool in the Pipe and Tube section. I am using Inventor 2014 S1 and this tool is grayed out and I can't select it? The auto route doesn't follow the route that I want.
View 4 Replies
Why is a part in an assembly not enabled for contact set? on right click the Contact Set option is grayed out, but that part was in contact set for another part already. i made some changes in the part, maybe that's the reason, is it?
View 3 Replies View RelatedJust thought I would post this since I didn't see it anywhere else. With Inventor 2009, the views in IDW are automatically set to associative which causes the visibility option for parts/assemblies to be grayed out.
View 3 Replies View RelatedI'm working on an assembly with subassembly. But for some reason or another, I can't use adaptivity on some parts. It's not a problem to project the geometry from another part. But when I move that part (wich I have projected) the projection on my sketch doesnt move with it. And in Tools>DocumentSettings>Modeling is "Adaptively used in assembly" grayed out (so I'm not able to select it).
The parts where I have this issue are copies of similar parts which are used in other subassembly. I removed adaptively with the previous assembly after taking a copy.
I am having a problem with the design accelerator in 2014. The tab is there, but I cannot click any of the buttons to actually insert a frame or design some gears. They are all grayed out. The design Accelerator appears to be loaded in the add-ins screen. I am running Win 7 64 bit.
View 4 Replies View RelatedThe Open (Check Out All) option is grayed-out when opening an Inventor file from Vault. How do I activate this?
View 2 Replies View RelatedUsing Inventor 2012 latest SP
My Image tool icon is grayed out in Insert Panel of the IDW.
I created a sketch in the IDW & have no way to insert a graphic.I checked multiple files including a new file forma template & cannot get the Image icon to work, it's always grayed out.
Is there an option setting I need to change?
We really should have the ability to cut & paste into IDW's.
I am trying to click on the "Iproperties" of an assembly but it is grayed out. It is not in a library, it is checked out of the vault, there is no lock icon if I use Iassembly tools (which I just installed to try the unlock.
If I place it in a parent assembly, I can then access the "properties" but it is difficult to do that workaround and I cannot do an update on the mass properties unless I can access the "Iproperties".
Inventor 11 SP2 Build 344a
Vault 5.0 Build 11.1.145.0
I am having problems with 2013 and trying to access the Stress analysis, when going into environments the tab is consistently greyed out. I made a very simple model and pasted the snips below.
-Environments Tab
-Add In manager.
I am very new to Autodesk products, I never used any of them before. I just purchased a student license and I downloaded Inventor Professional. This is the 2013 version, 64 bit edition. I also downloaded Vault Basic 2012.
I am trying to learn how to use these tools and one step in this process is to map the working folder in Inventor to Vault so files can be checked in and out, so I created a new vault, added users and groups, and that went without any problem.
Then, in Inventor I log in to this new vault. All the other buttons, (Open, Place, Check In and Check Out) are grayed out at this time. Reading the literature, I got the instructions to click on the Vault ribbon in Inventor, then on Access and "Map Folders". But at this point I cannot proceed because this menu item is grayed out as well.
I am using Autodesk Inventor 2013 and for some reason I cannot access the precise input option. I can find the icon in the draw box, but it is grayed out and not clickable.
View 9 Replies View RelatedIn an assembly, you can type in offset values for a part or assembly via the properties occurrence tab. Why is the x y and z offset angle entries grayed out? Is there any time that these could be used?
View 9 Replies View RelatedAll I want to do is rotate one dimension. I want to leave all the others alone.
When I am editing my drawing, I double click on the dimension and get the diag box and unfortunately the rotate dimension command along with the degree box is grayed out.
Am using Inventor 2013. I have imported some surface models into an IAM. They are not visible in the idw. When I attempted to make them visible by right-clicking on the item in the idw browser, then selecting the "Include all Surfaces" option, the option was grayed out. How can this function be enabled?
Also, can "Include all surfaces" be enabled in advance for all surface models/all views in the idw so that it does not have to be done after creation of each view?
Why is dimension visibility grayed out in the sketch context menu shown in the attached image?
View 3 Replies View RelatedI have a problem with a recently downloaded version of Inventor. When I start a new drawing all I get is a blank blue screen instead of one with a grid display. If I start a line I can see the cursor change to draw the line but a line does not appear. I don't know if it something with how I installed the program or just system settings.
View 2 Replies View Relatedhow to break diameter line into horizontal line at the end ?... there's no such option in editor style (I want to have 2 arrows for this diameter, not one as it is in editor options)
View 2 Replies View Relatedhow to make the lines of a reference part that are in effect acting as hidden lines become removed from a view?
We've tried making the part phantom...which isn't right as we need the line representation of the part to be as the reference linestyle...
We've tried changing variables & tick boxes in the edit view dialogue boxes...but nothing works...
I am trying to insert a JPG image in my IDW, but the "image" icon is greyed out?
View 5 Replies View RelatedThere are some lines that are not visible in my .IDW. I have had this before and am wondering why this is happening. Basically this is a vinyl gasket which is shown in my .iam file. In my .idw it is not showing although I have not turned off the visiblility of the part.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I have a drawing I am trying to ordinate dimension and I was wondering if it was possible to place a symetric tolerance for a dimension on a second line under the actual dimension?
View 6 Replies View RelatedI am using a plane for my zero lines in my assembly drawing. For my customer to complete the approval drawings i need to dimension to it.
View 2 Replies View RelatedLet's say I have a flat pattern view of my part and the bended top view of the same part on the same drawing and I want both of the left side of each to be in line. (The right side shortends after the bends occur but the left side is not changed at all)
Work around:
1. Export to autocad and line them up with the osnaps, etc
I know how to sketch per view and project geometry but thats still on each view and when I try to line them up I am using my eye. Is there a better way to line both up even though their on different views?
How to put text under dim line in inventor?
i.e. 8 1/4"
------------
(TYP.)
Using Inventor 2013. In an IDW, I have toddled off visibility of lines in a view. I would like to regain visibility of these lines. HOW?
View 2 Replies View RelatedWhen I edit a title block I would like to know which layer a particular line is on. If I right click to activare the "Properties" dialog box. All it tells ne is that the line is "By Layer". How can I tell which layer an entity is on?
AutoCAD 2013
Inventor 2013
Windows Pro 7 x64
Asus Sabertooth X58
Intel Core i7 960 @ 3.2 GHz
24 GB ram
I downloaded some GeoTIFs from Nationmap.gov. I attched them using FDO and when I view them in a layout tab, they are all greyed back and almost looks inversed but not quite. How to adjust the images so it looks correct?
I'm using Civil 3D 2013 SP1.I just tried it again with the MAPIINSERT command and I'm getting something similar.
How to get more than one line of text into a Message Box if this is possible.
View 3 Replies View RelatedI am trying to fold the attached sheet metal part that is created from an imported ACAD drawing. After cleaning up the sketch I created the face and then created a sketch with the first bend line on it, but when I attempt to flod the part it will not sellect the bend line. I have attempted selecting the line before selecting fold and that does not work. I have placed the sketch both on the part surface and the datum plane. The only line I can get fold to select are the two ends of the part but I don't see how anything could be bent off the end of the part.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
I'm using the line tool in a 2d sketch. First, I draw a polygon with the tool. Then, when I come to move one of the lines with the mouse cursor, it detaches from the other lines, and becomes a single floating line on its own.
As far as I can tell, it has nothing to do with the fly down constraint menu options, but i may have changed another option elsewhere in inventor and not have realised it.
How do you specify an angle for a line while sketching?
There is no command prompt like I've seen in so many examples etc.
