AutoCAD Civil 3D :: Plot Map At On 24 X 36 Paper And Keep It To Scale?
Jun 18, 2012
I am trying to plot a map at on 24 x 36 paper and keep it to scale. It appears I have all of the correct settings including 1"=1', fit to paper is unchecked, etc. My print preview comes across correctly but when I go to plot a message appears in the command line stating
Effective plotting area: 26.00 wide by 18.00 high
Effective plotting area: 13.63 wide by 6.22 high
Plotting viewport 2.
Effective plotting area: 13.77 wide by 6.25 high
Plotting viewport 3.
Plotting viewport 1.
The plot then comes out on paper way larger then 24x36 and the area plotted is limited to the 13.77 x 6.25. My co-worker opened the drawing and printed it to scale on 24x36 no problem. What gives? I cannot find a setting to get it to plot correctly.
I'm using 2004lt- I have current .dwg in modelspace and set up to plot in PS@ 3/23"-1'-0". I'd like to create a second set of PS tabs to plot portions at 1/4"-1'-0" on the same border when needed.
In its a single viewport in MS and PS the current scale is 1:1 but if i change it to 1/4"-1',etc the plot preview appears wrong
I'm having trouble with paper space labels. When i zoom in and out to adjust my viewport, the scale looks fine. Then when i go to plot preview all text are enlarged. Then when I cancel I go to paperspace and labels remain large.
Where is the “annotative scale” and “paper text height” properties?
I couldn’t find the “annotative scale” and “paper text height” properties when dealing with “Civil 3D” objects such as points and contours the same way we have it in the regular AutoCAD.
For example, suppose that I need to increase to decrease the “text height” of the point label considering a particular “annotative scale” property, then how this kind of thing might be done in the AutoCAD Civil 3D?
I want to create a simple scale bar in a paper space layout, that is dynamically linked to the scale of the viewport.
I've searched and come across a few dynamic scale bars on the web and a few forum discussions, but I just can't work out how to create my own from scratch...
I am trying to print a tall, thin window, auto-scaled to fit on 11x17 paper using a Windows PC3 driver. I want the image to be essentially 17" tall. No matter what paper orientation I choose in the printer Properties (Portrait or Landscape), the image is rotated automatically the wrong direction. (The print preview shows the paper rotated as Portrait or Landscape correctly, but the image is always rotated to fit the 11" dimension of the paper). I'm using AutoCAD Electrical 2008.
I am working on automating page setups in model space and am looking for a way to set the plot scale equal to the annotation scale for scaled drawings with
Setting the plot scale with !A causes the lisp to fail. However, when running each prompt through the command line individually, !A works fine. what is missing?
I have a block that i would like to scale based on the plot scale when plotting.
We set up our drawings full size and occasionally we want to plot them at half size. We do this by setting the plot scale to 1:2 (custom) in the plotting dialog. We have a few blocks that we want to print at the same size on paper, essentially become twice as big.
Is there is a way to fix the size or just set a few scale states and have them automatically adjust based on the plot scale (not drawing/annotative scale)?
I work in autocad 2010 and I draw in scale 1:1 . What an annotation scale is, moreover I have never used annotative objects in my drawings.
Nonetheless, when I try to plot a drawing, while I am in the model view, I choose the scale in mm/units, I select the plot area and when I press preview or plot, I get the message THE ANNOTATION SCALE IS NOT EQUAL TO THE PLOT SCALE. DO YOU WANT TO CONTINUE?
I press yes, I print it and the outcome is always a bit smaller than it should be.
When i am in the layout mode and I try to plot, I dont get this message. But I dont know how scaling works in this case. For example I want to plot in a A4 paper, scale 1:100. So I type 1000mm/100units, as I did in the model mode, but the result is wrong.
I have drawn plans and am trying to send them out for printing on 24" x 18" paper. I used the add a plotter wizard to get the Tiff version 6 plotter added to my plotters, and the tiff it puts out is only 4" x 3". I have tried scaling the picture, changing the paper size, looking through all the options in the layout tabs and plotting tabs. I can't get anything to work. My only options in for paper size in the plot menu are pixel sizes, I can't select paper size. I am using autocad 2005.
I set up my paper space to A1 size so i have plenty of room to dimention. However, if i measure what AutoCAD has set up as 'A1' then it is 3.2cm x 2.2cm, the atual size of A1 paper is 59cm x 84cm. If i were to print this page on A1 paper it still comes out the right size on A1. I know it doesnt sound too serious but i would like the paper space in the right scale so i can have my text set to the right hight and my bubble reference boxes the right size for when it is printed. (it also does this on all paper sizes, im just using A1 today)
I am trying to setup some pre-made paperspace layouts with legends and details. These will not change from project to project so by doing this ahead of time it can save time provided we can get the line types to display correctly!
How we do things now is we set the global scale factor, GSF, to suit the drawing scale of our floor plan. This is typically 1/4", 3/6" or 1/8" if were working in Imperial units.
The issue in doing this is that when we change the GSF the line types drawn in model space do not display correctly. We could go in and adjust everything manually on each project but this is laborious and time consuming.
Is there a way to set up sheets in paperspace so that they will always display the same regardless of the GSF?
I have this layout inside cloud area i want to standard setting like if i want to print on A3 paper which text height i need to use dimension title block etc.
2nd question is that inside cloud area there is some point (Red) like M1 to Mxxx i need to get coordinate in table is there any lisp to make table with coordinate otherwise i need to pick one by one point p
I was wondering if the 8.5 x 11 dimensions change at all when going through an inkjet printer, and if so, how much. I suspect this is not a significant issue with scale accuracy, but wanted to be sure.
Normally I plot in paper space and everything works well. when I plot in paper space all the lines ae much, much lighter and almost invisible, whereas if I plot the same drawing in model space the plot comes out perfectly, though not in scale. I must have pushed a wrong button somewhere but wnat button is beyond me.
I`m using AutoCAD2004 with HP Designjet 800 Plotter.
The Plotter is connected to network.
I want to add some Custom Paper Sizes, however, when I open the options for the plotter(User-defined Paper sizes&calibration), I can`t add or modify paper sizes. The `Add` button is not available.
I set my computer to `Power Users` but still cant add. How to make the `Add` or `Delete` buttons usable?
I'm having a problem making paper size filtering 'stick'.
For years I've configured PC3 and their associated PMP files for each of our printers and plotters. As a part of the configuration, I filter out all the paper sizes we don't use. Once the PC3 and PMP files are configured, they're copied to all the local PC's. I've never had a problem with this, until now.
On the PC where the PC3 file is configured, the filtering is correct. On any other PC, various paper sizes are added. For instance, I'll filter out all paper sizes on printer "X" except for 8.5x11 and 11x17. On a similar PC, the paper sizes "16k 197x273mm" and "8k 273x394mm" are added.
If I point the PC's to a location on our network where the PC3 and PMP files are stored, I get the same results.
We have two OS's here - Win7 Pro and XP Pro. All OS's are kept up-to-date. All the Win7 PC's use the same version of the HP Universal Print Driver. All the XP PC's use the same version of the printer specific drivers.
We have a T790 44in, with 42" roll paper installed.
The thing I'm having trouble with, is getting it to act like it has roll paper. I can set custom paper sizes in the printer drives all day (such as 42" x 42") but this is only half way accurate, and can waste a lot of paper.
Is there a particular way to set the printer to use the roll paper?
I do most of my stuff on A3 and have my paper space sheets set up for this no problems. When I have my drawing in paper space i usually set the scale to what I want. Now, when I am still in paper space with my correct scale, I want to change to model space and move or position the drawing exactly where I want it on my sheet , without it going out of scale. I have a very sensitive middle button on the mouse, and when I hold it down to move the drawing around, it goes out of scale I want to lock the scale first before moving the drawing around.
Working in acad2011, I have a 3D model and i did flatshot. The obscured lines I chose to be - - - - - (ISO02W100). Now i have to annotate and get my paper layout rdy for printing.
Questions: 1. Is there a way of scaling lines that make up my flatshot image in model space? 2. How can i scale the lines in paper space?
The - - - - - lines just don't seem right in my paper space.
How to set the printer setting in Autocad that only show ISO paper size only? Currently i am using HP DESIGNJET 800 42 and when i need to do plotting, it show me a bunch of unnessary of paper size list as shown in attachment.
I have layouts set to print to a printer in the office, sometimes with different sized sheets. Everything worked perfect until we upgraded from Civil 3d 2013 to 2014. Where I'm gettin a problem now is publishing to PDF. It will cut off the left and right margins of the 11x17 sheets. I've tried everything and looked everywhere but can't keep it from doing that.
Is there anywhere to set the publish to PDF settings? I've played with the DWG to PDF.pc3 settings and no change.
2 of 3 viewports in paper space do not show up in print preview, nor will they print. The viewports are all on the same layer, defpoint layer. Even if I create 3 new viewports and erase the old ones, still can only print preview one viewport and only one viewport will print.
I have a drawing in model space the i drew to scale of 1'=1' and I went to paper scape to put the drawing in my title block using Viewports. highlighted the viewport and went to properties to give the drawing a scale so it would maximize the Viewport area, on my 22"x34" paper. but under the standard scale 1/64"=1' is too big and 1/128"=1' is too small. the simple solution is zoom extents but then in my title block i have to put NTS. I would like to add to the standard scale or be able to set the customer scale to a whole number. EX. 1:1000 or 1:150, etc. etc.
I'm drawing something much larger than the paper so I would like to chose paper size A(8.5x11) set the scale then print it out on A(8.5x11) paper. For example: my desk is approximately 65inch x 30inch and I want to draw and print it on A(8.5x11) paper. I want it to print with the drawing being accurate to scale...how do I do this?
