I'm playing around with render materials and have the material assigned and the surface style to show only triangle in model view. When I go to Realistic view style should the not show?
View 2 RepliesI customized a surface style to show relative elevations, with lighter tones representing higher elevations, and darker tones representing lower elevations. With a single glance, I know the high and low spots in my project area.
C3d provides several default surface elevation styles. None of them comes close to providing the instant, data-at-a-glance information that my customized style does, which I use to design stormwater systems. Again, it's really useful to see, with one look, where the high and low spots are in my project area.
I can't figure out how to export, transfer, copy, whatever, my customized style from one drawing to a new drawing. If I want to see my customized style, I have to recreate it from scratch in each and every drawing where I want to use it.
How to transfer a surface style from one drawing to another? By the way, I tried opening up both drawings, with both toolspace/settings windows open. Tried dragging and dropping the customized style to the new drawing. Didn't work.
I have a surface with all sorts of heights, and want to add color to different heights. Getting the color there is not that difficult, but how do I swap them around? i.e. red is 'low ground' and blue is 'high ground'. In Holland we use it the other way around though, so blue should be low ground and red high ground.
Where exactly do I change this? I've tried it in the surface style tab, surface properties tab, analysis tab, and some others, but no success so far.
I have created a surface spot elevation label style. I have several surfaces. How do I associate the style with a specific surface?
View 2 Replies View RelatedA way to associate a default profile style with a surface. In other words, I would like to set a different default profile style for each surface. Same could be true for sections.
View 6 Replies View RelatedI am looking for either a corridor style or surface style to display slopes while in plan view while working on a corridor. I know you can turn on slope arrows as a surface style, but I am actually looking for the grade to be displayed next to a slope arrow. Hopefully I am explaining it properly.
I just am looking for a better way to spot errors before putting surfaces into machine control without checking station by station in the section editor.
I have surface style (could be slope or spot elevation) with a 2 line component, and text component above and below the line. I'm trying to create on style for many options. I'm using c3d 2013, but moving to 2014.
I would like to do the following after placing the label:
1. adjust the length of the line component. (ex: as I rotate the lable, the length of seg 1 changes )
2. turn off one of the line component
3. adjust the angle of one of the line component.
4. when drag, the length of the line changes to a new value.
and while I'm asking, is there a way to move/rotate/drag the syle to a percise distance. I want the leader to be 1 unit long at 30 degree angle.
Is there a surface setting / style option where contour labels (elevations) will display at some specified interval as part of the surface rather than going through and adding them as labels afterwards? Seems like a rudimentary operation, where the labeling can be so scattered and random.
View 2 Replies View RelatedUsing Civil 3d 2012, I have a slope label with mult lines, and set to plan read.
When I rotate the label, the goes to plan read, but the bottom line text is on the top, top on the bottom.
I hope it would be simular to mirror.
I look at the expression, but didn't see any way to get the label angles.
I've created a triangulation volume surface to compare two surfaces. Under the analysis tab in Surface Properties I have banded my levels in metre intervals and coloured the bands accordingly. I would now like to display the 'banding' in my drawing. Under the information tab I should be able to select 'Elevation Banding (2D)' as a Surface Style, however this is missing and I can only select 'Standard'... How to get this selection back.
View 4 Replies View RelatedI am grading a parking lot and trying to highlight areas with less than 1% slope.
I can't find the spot to set user slope ranges in the setting tab.
I can find setting number of ranges with three options of minimal use.
This used to be so simple in LDD.
The examples I have seen for this function all show odd ranges of limited value.
I can only change the layer color.
But I can't change the cross simbol, its drwaing scale.
Also cant view the point number,....
Maybe I cant view or set these properties when points were added using "Point Files" option.??
Civil 3D (2013)
I'm trying to build a list of surface lable style, (both slope and spot elevation) using vlisp 2013.
I can create a list of the parant, but I can not find the clildren.
my goal is to change a surface label style between the parent and the children, using a list. To many style for the property menu.
I'm using 2D solid level band surface styles when generating simple flood maps - In order to manipulate I generally have to extract the surface objects (faces or hatches) which gives me a single face or object per triangle within the surface.
I then try and get round this by using a combination of various Lisps and Union to wind up with a single boundary that I can then use in ordinary AutoCAD and 3rd party software. However on big surfaces this is killing me as I have 50k+ triangles, so 50k+ faces or individual hatches, so its causing 15min long unresponsive stalls on my PC.
What I'd like to do is simply export the boundary of each level band to a polyline, or even better to extract the whole solid band as a single hatch object. Is this possible within C3D as it stands, or is there a lsp out there
C3D 2012 SP3 on Win 7 Pro:
I have an alignment with horizontal PVI points that are coincidental with COGO points. I want to display in a profile view, a surface elevation at the alignment PVI points in a band style. Is it possible to do this? If so, how?
Is there a way to create hatching for the slopes surface style instead of using solid colors?
View 2 Replies View RelatedI am trying to create a linetype with a 3d shape included to represent road markings, i.e. central lines and edges etc.
For this I need a .shx file and I don't know how to create this as I am not allowed to select 3d objects when using the MKSHAPE command.
How can I best create a linetype with 3d objects?
My knowledge is that there are two ways of rendering and visualizing corridor. One by Code Set Style; the other by Corridor Surfaces and Corridor Surface boundaries. So, what are the advantages of one over the other? Which method is more preferable?
View 1 Replies View RelatedI created a simple roundabout in Civil3D with the intent on visualizing the corridor in 3DS Max Design using the Civil View plugin. The corridor rendered complete in Civil 3D, but there are large corridor gaps in Civil View. They all appear to be at the location of corridor baseline boundaries. Obviously this is a non-starter, as 3DS Max is supposed to improve the visual quality, not reduce.
Attached are some sample images of the roundabout in Civil3D and in 3DS Max Design.
I am using Civil 3D 2012 and 3DS Max Design 2012.
Is there a way to search for a text style in a civil style? I have a text style that our company is trying to get rid of and I would very much like to not have to go through our 72 company styles.
AutoCAD Civil 3D 2014
HP Z620 Workstation 64-bit
Duel Intel Xeon E5-2620 @ 2.00 GHz
Ram: 48 GB
I am trying to change the default label styles for AddSegmentLabel under general styles using .NET...
Dim X As Autodesk.Civil.Settings.SettingsCmdAddSegmentLabel = CD.Settings.GetSettings(Of Autodesk.Civil.Settings.SettingsCmdAddSegmentLabel)()
X.Styles.LineLabel.Value = strChildStyleName ... says name does not exist
or
X.Styles.LineLabelStyleId.Value = oidChildStyle ... "The type of objectId is wrong"
If I manually change it to a child style and then check the values, they are the same as what I'm trying to set them to. If you use a "parent" style then these both work. Am I doing something wrong or this another limitation?
Civil 3D 2013 - Windows 7 Pro 64 - Dell T3500 - Xeon 2.67 - 24gb - Quadro 600
I have ipt file that I am trying to derive into another part file. The "derive style" is set to surface only. solid icons (top most row icons) are all disabled/greyed out. But actually the part i am trying to derive oesnt have any surfaces.
Why does inventor force the derive to be surface only?
If i continue to dereive, I am seeing that the "move bodies" icon is also greyed out.
C1
Inventor Professional 2013
Vault Collaboration 2013
I often have to do storm pond surfaces that (for the purposes of planning) are flat on the bottom. These surfaces are created from a combination of survey data and grading groups and the tin of these surfaces is perfectably acceptable. However, when contours are shown, the flat bottom is shown with contours jig-jagging all over the place.
The attached image shows a comparison of the same pond. The top was created with survey data and grading groups; the bottom was created using contour data only. The generated surface on the top shows the bottom contour going in different directions and has parts where the an expected contour is missing.
How to correct/manipulate the surface to show a proper flat surface?
Has instances where you set your tolerance for the maximum triangle lenth to say 50m to reduce the amount of triangles along the edge that run at long distances. When I do this I end up with multiple surface holes and I'm not sure why as there are points in the area.
I thought well maybe it's because i should've reduced my max triangles first then added breaklines. Would this matter? I also thought I could add a line to the surface to fix the holes vs. deleting surface lines along the entire edge of a surface for many many miles.
I am trying to add points into a surface. I have done this before without any problems, but now I am having issues.
When I ID points which makes up the surface it gives me the correct Z level e.g. 24.5m, however when I hover over the surface it shows me the surface name and a different z level e.g. 0.65m. What is the reason for this difference in z levels? I think this may be causing the issue I am having when I add new points.
I select the surface and use the 'edit surface command' in the ribbon, choosing add point.
When I add a point at the level I require(23.89m), it puts it in a lot higher than the surrounding area, so I tried to put the point in to the lower z levels (0.4m) it puts it in a lot lower!
My goal is coming up with the volume bounded by the design surface and the existing surface. I don't have the design surface modeled yet.
Do i need to create alignment offsets?. Alignment 1 profile view is also attached. Then Alignment2.
What about starting with alignment1 profile view? Since I have created a polyline as the design profile ?
how do I shrink labels? Where is it in the settings ; the Align folder had been check.
I am issues with DEM files that I am downloading from the USGS website.I download 24k, elevation for the area I need. I then choose staged 1 second, add a surface to a blank drawing, then upload the DEM files to the surface.
The surface imports correcty, but when I try to import points taken by a surveyor on the same drawing, they plot incorrectly.The DEM surface and the points from the surveyor do not correspond. Also, the DEM surface is in meters, not feet. I have tried changing drawing settings, datum types, coordinate types, etc.
Is there any way to change the referenced surface on a Surface Elevation Label. I can see the surface in the properties but cannot change it.
C3D 2011
I have a project involving 3 programs. I am creating a planned development in 3d to be 3d printed when finished. The project is a 5 acre tract containing 8 buildings. I have built the surface in C3D and each building in Revit. The buildings are not in the same Revit file. For my solid work, I will bring the files over into 3ds Max Design to section into smaller quadrants to build in the 3d printer.
The questions:
Would it be better to import the surface into Revit to merge surface and buildings together?
Would it be better to import the buildings into C3D to merge entities?
Would it be better to bring those entities into 3ds Max and then merge them into one? Will 3ds Max Design allow me to insert entities accurately in the environment?
I need to create a sub-set surface from my main surface. not sure what the vernacular is for a "subset surface" in c3d but i do have a feature line that bouinds the desired area, but that is as far as i can solve.
i did try creating a new surface - pasted the main surface in the edit definition, then deleted triangles until the boundary alighned wiht my featureline. This seemed to work, but when i view the properties of the smaller subset suface, it shows a mimum and maximum elevation that is incorrect.
Im currently using an addon for Civil 3D called Novapoint. It allows me to create 3D models of surfaces made out of 3d faces and easily models cut and fill 3d-models for me.
The only thing i need to create a cut and fill model is one or several ground surfaces (existing ground, earth layers, rock etc. whatever i need) and a closed polyline/3Dpolyline that represents the level I want my cut and/or fill model.
I enter the spcifications I want such as; earth cut angle, rock cut angle, fill angle, select which surfaces i want to include in the model calculation and select the polyline.Novapoint then calculates the cut/fill model from the surfaces to the polyline and models the different cut/fill angles and gives me the results in a 3d-face model and a specification of the volyme of rock cut, earth cut an fill.
1. Novapoint is quite unstable and crashes alot
2. You cant create profiles out of 3d faces
3. Novapoint does not automaticly combine the start surfaces with the modeled cut/fill surface
4. A large surface made out of 3d-faces demands alot of computer power
So I want to how I do the same that Novapoint does for me in Civil 3D? (I have access to Civil 3D 2007-2013 depending on which one you're using)I know I can take the 3Dfaces i created in Novapoint and make a surface in Civil 3D with them but I want to exclude Novapoint completely.