I am having issues with the publishing command.
When I plot a single tab the frozen layers in the viewport do not plot, which is correct. But when I publish the same tabs the frozen layers in the viewports all plot.
issues switching layout tabs by clicking on the tabs?
Occasionally, clicking the Model or other layout tab results in no action, as if I'm not clicking on it.
All other controls (within and external to C3D) function normally so it's not a mouse hardware issue.
It will usually correct itself if I "restore down" the main application window, then maximize it again.
The -layout command is a workaround too.
In one file Civil 3D keeps crashing when I wan't to publish multiple layouts to pdf.
I have publish in background turned off and I am using Civil 3D 2013
When it crashes I get the following Error message:
FATAL ERROR: Unhandled Access Violation Reading 0xddadd6d8 Exception at 771d8359h
noticed that the file size of pdf's created using the publish command in C3D 2014 are much larger than files created using 2013? I'm talking twice the size in some cases. I've gone through the settings and found no differences, but there must be something I'm missing. When I use the plot command on a single layout, the file sizes are similar, so there must be something in the publish command.
C3D 2014 HF1
I'm trying to incorporate in my new workplace the Sheet Set in our plan production.
But one of the powerfull thing of the SSM is to publish multiple (or single) sheets at a time.
Well, i tryed it since a few months in and out publishing via the style sheet on the sheet set template i'm building and it doesn't print.
The publishing icon in the status bar of civil 3d 2012 keeps on going for ever !!! (Even when i cancel the job, it doesn't stop the icone, like it's jamed)
Btw, even if i pass by a drawing that isnt in the SSM and choose several layouts to publish it does the same thing too.
I use to do this on a 2008 version of Autocad.
Using : Autodesk Civil 3D 2012
OS : Windows 7 - 64 bit pro
When publishing a drawing set, I have a printer set up which creates KIP plotfiles. In LDD 2007, there was no issues. After upgrading to Civil3D 2013, when publishing to plotfiles, all sheets are merged into 1 plotfile, which is unusable.Seems like a bug in the publishing component. Publishing to PDF or DWF gives the option of merging all files or creating individual files.
View 2 Replies View RelatedWhen publishing a sheet set some of my annotation labels are not showing up. If I open the sheet, they are there, set to print and everything is correct. If I print just that sheet, everything is fine. Only happens in publish. It's almost like the publish command isn't giving the drawing enough time to open and load everything before printing.
View 9 Replies View RelatedI have tried to bring in the 3d block for a fire hydrant, exploded it and combined as 1 solid, added connection point. When using the Civil 3D 2013 "publishpartcontent" command it ask me to save the .content file but when creating the png it outputs an error in the command line. When I go to bring in the content in the catalog edditor I recieve an error saying .content file units do not match catalog. I have tried bring the part into both metric and imperial catalogs and recieve the same error. I also tried creating just a cylinder soli in a new draiwing and publishing the content file, I still recieve the error when it tries to create the .png but when I load it into the catalog it works. Is there any way to set the units of the solid within civil 3d before creating the .content file.
C3D 2013 SP1,
Win 7 64, Core i7,
16 GB RAM, Quadro 400
I have a large scale industrial project with multiple road profiles and sections sheets. I find that when I plot my drawings manually by opening the drawing everything comes out fine. But when I publish the drawings manually or thru Sheet Set Manager, it shifts my vertical curve labels on my profiles down, which then conflicts with the profile linework (see attached image). Unfortunately manually plotting these drawings is not an option. Because of the amount of information in each drawing it takes 3-4 mins to open and we have 200+ drawings in a single set of drawings, which we have multiple sets of drawings for the project.
View 2 Replies View RelatedFor some reason our layout tabs keep re-arranging themselves. All of a sudden our sheet 2 ( or what ever) is between tabs for sheets 35 & 36 (or where ever it wants to be).
we use tabs because 45 sheets of images require never ending scrolling. the current tab is never the image shown....they always start at the 1st tab?
when you are on sheet 40 and want to go to 44.....scroll .
Question of curiosity. The Properties Palette in C3D 2012 has four tabs: Design, Display, Extended Data, and Object Class. The Design tab obviously has a lot of valuable information and allows you to edit and manipulate entities within the program. But do the other tabs really have much value?
OK, it seems that there may be times when the Extended Data tab is of use as you can associate hyperlinks, notes, and documents with an drawing object; so I can buy into that. Are there folks finding those features to be useful?
Now I don't know about the Display and Object Class tabs. Whenever I select an item, and happen to check these tabs out, there just doesn't seem to be any useful information. Perhaps I am not selecting the right types of objects. If they are not listing any valuable information, why are they so prominent instead of being buried deep somewhere. Any insight into the usefulness of the two tabs?,
I am using 2013 and it wont let me rename the layouts . I have just 10 layouts and it will let me rename one but not the others. The others just flash the little blue color and back to black.
View 2 Replies View RelatedMy layout tabs are missing. How do you get them back?
View 9 Replies View RelatedI clicked "Hide Model and Layout Tabs" to see what it would do, and now I can't get them back. Not only did I lose them in that drawing, I lost the tabs in EVERY drawing and EVERY version of C3D. I googled the problem and every forum says the same things, and I've tried them without success:
Options >> Display >> Layout elements >> Display Layout and Model Tabs
CUI >> Workspace Properties >> Model/Layout Tabs >> On
I'm lacking a couple of icons on the lower tray to the right of the Model/Paper button.
The baffling thing is that I've lost the tabs on ALL versions of C3D. Is there a magical command line entry that will bring back my beloved tabs?
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
My IRM officer had to install some sort of update to my AutoCAD Civil 3D 2010 package. When I loaded AutoCad, it gave me a message where my ribbon was that "The Ribbon does not have any tabs or panels currently loaded." I was able to fix this with the WSCURRENT command, but when I switch to the "Task-based Geospatial" or the Tool-based Geospatial" module, I cannot get the Ribbon back.
View 8 Replies View RelatedI am running civil 3D 2014 and have several lisp file that I have added to my startup suite. I am creating layout tabs for plan and profile sheets and use my lisps continuously and then all of the sudden it tell me that it's an "unknown command". I have closed the program and reopened the drawing an I realized that my start up suite is now empty.
View 2 Replies View RelatedIs there a way to customize the way Design Center Imports Layout Tabs?
When you import a Layout, it brings with it all attached images from the source drawings even if they are in Model Space.
I have installed Infrastructure Design Suite 2014 on one of my users' workstation and one of the several problems she is having I can't find info on anywhere: When she uses the DWG to PDF driver she is getting strange artifacts that, at first glance, look like little blocks randomly placed around her drawings. These are always over/ in viewports. They do NOT show up in plot preview. I tried plot and publish. Both give same results. When zoomed in you can see they are tiny little viewport control dialog boxes that seem to have been placed on the plot at random.
View 4 Replies View RelatedPublishing files using Autocad 2012 with a page setup to plot to PDF files. I am utilizing Autodesks "DWG to PDF.pc3" file. But I have to go and manually rename the files to remove the "- Model". Is there a way to change this while publishing? Or am I stuck with this file naming convention?
View 1 Replies View RelatedWe seem to be unable to overwrite a PDF that we created with AutoCAD when PDFing anew with AutoCAD. In other words, I "Plot" a file in AutoCAD and PDF it as "New File A". When I later realize I made a drafting mistake and want to overwrite it, when I "Plot" it says the file is in use or write protected or something of that nature so I have to PDF it as "New File B" and then manually delete "New File A" and then rename "New File B". I might add I do not have to close AutoCAD to do this.
View 3 Replies View RelatedRecently I have an error message when publishing drawing.
"Your request could not be complete due to an unexpected problem. Turn off background plotting and try to plot again".
I'm currently setting up the sheet templates for our office to include page setups for the various sheet sizes (Arch D, Arch E, Arch E1) and output types (full size, half size, 11x17).I have created a PC3 file for each sheet size and output (ArchD full size and ArchD halfsize use separate PC3's) to best utilize the paper sizes made available to us. After testing from my machine, I went to test it from another users computer and ran into problems.The trouble doesn't lie with plotting to our plotter, in fact it works everytime. The trouble is when publishing to CutePDF. When I open the file on this users machine, I can't even click the page setup for the CutePDF. It continually defaults to None.
I've copied all the PC3 files (yes, I even created one for CutePDF) to this users machine, but still cannot get the page setup to work.I've always thought that defaulting to the None plotter was an indicator that your machine doesn't have the correct PC3 file, but that shouldn't be the case in this instance.
When Publishing multiple drawings to a Xerox Plotter, only the first sheet prints. Works on the other 3 machines in the office,just not working with the new machine just set up. Can't seem to find anything that would cause this to not print the whole job.
View 1 Replies View RelatedMy Company runs AutoCAD LT 2008
One of the PM's I work with is having problems getting to the Publish Options. He needs to change the Layer option to Publish with Layers but he is unable to get the Publish Options window to open and not lock up his AutoCAD. I also had him try to go through the Options-Plot & Publish and see if that would give him any other result. We have rebooted the PC and tried to launch AutoCAD and then try with no luck.
I've been using autocad for quiet a few years, I can do most of what i want but I might be missing some basic knowledge. I've been creating some template for drawing which include different layout A4, A3, landscape and portrait.
If I use plot/print using cutepdf or adobepdf as a printer the results are good (print the same than the preview).But when I use publish using dwg to pdf then my layout are shifted to the right outside of the printing boundary.
when I publish to PDF, CAD automatically names the PDF file as the drawing name and then the tab name eg, Radome Lighting Mounts - 22-095 with the Radome Lighting Mounts being the drawing name and 22-095 being the name of the layout tab.
My question is, are you able to reverse this so that the file name of the PDF reads 22-095 - Radome Lighting Mounts?
has something changed in 2011 controlling prompts to save pdfs when publishing from sheetset manager?? im using page overrides, which uses dwg to pdf.pc3 file. it publishes but no prompt for file name. i have checked the sheetset publish options and it is set to multiple & prompt for file name, however it still doesnt prompt and saves it in the folder nominated. where else is this controlled?
View 6 Replies View RelatedI have no problems publishing to one file from multiple tabs, or plotting to multiple single files named after each tab. I want to batch plot to a single file with bookmarks named after each tab in my AutoCad file. I would think that it would name each bookmark "Filename-TabName" as it goes down the batch plotting (publishing) list. Right now, I print to individual files and combine. This creates bookmarks for each filename like I want, but I have to name my tabs in order, or re-order everything each time which is time consuming.
Is there a setting to create bookmarks as you print to a single file that are named after each tab? This would be cool and very useful. I cannot imagine that I am the only one who wants this.
Is there a limit to how many drawing files one can send when using the publish command? Using ACAD 2010.
View 1 Replies View RelatedI just created an empty Fastenal Library, and it is set to Read/Write. We order most of our fasteners from them, but not much else, so I used "Copy Category Structure To" Fastenal. I created a plain washer to add to the library, but when I try to publish it, I can't get it to work.
When I "Publish Part," I select Fastenal and English, then am asked to select a category to publish to. The Washers folder is greyed out, along with most other folders, but the Ball sub folder is not. I can't select Plain, which is what I need, but I can select Ball.
Also, is there a way to delete sub folders? I right click on Pins or Rivets, and the option to Delete Category is greyed out.
I've started having a problem with the Publish command when publishing multiple drawings to PDF.
When I plot a drawing using the plot command, I don't have a problem.
When I publish one drawing using the Publish command it is also fine.
It is only when I try to publish multiple files that the problem occurs- the PDFs are produced, but the it is as if the drawing contents (paper space) has been shifted up by 10mm or so, cutting off the top of the drawing, and creating a larger margin at the bottom of the drawing. I use exactly the same page setup as for the single drawing plot.
There seems to be no setting that would change this, and the fact that publishing a single drawing works suggests that there is some kind of bug. At the moment i have to plot every drawing individually (or get my colleague to do it- it works fine on his machine, same page setup file!)
See attached example.