How to open the .000 file? Recently I was received some .000 file which is used for storing an electronic Navigational Chart. How can I underlay it to my Civil 3D project?
View 2 RepliesI use Windows 7 Pro, 64 bit. I saw an item that suggested going into Explorer and clicking "show hidden files and folders": I clicked that and then restarted the computer. No change in behavior.
I've left the import up for more than 5 minutes (someone mentioned that LR4 is slow): I never got the import done.
When I click the "X" at the end of the import thermometer, I get a message (in that location) that the import is canceled. The display in the main window (where the image would appear) still says "importing files". I have to quit LR4 and start it up again to do anything else.
I was previously using LR3.6, that used to work fine. I tried going back to LR3.6 to import some files I recently shot: now LR3.6 does the same thing as LR4 (hangs when I try to import Nikon Electronic Format files).
Where I can find a printable doc/chart of the pen settings, with their colours and pen widths ?
View 2 Replies View Relatedwhere I can find a color chart in a dwg file that I can print out? I know of chroma.dwg (255 colors) and there are various color wheels I can download, but I'd like something like a Benjamin Moore (or other paint) that is in chart form, or the Pantone colors.
View 4 Replies View RelatedI was wondering if it was possible in c3d to label points in the fashion often used for nautical charts in which each sounding (elevation) point is labeled with the integer component of the number followed by the decimal as a subscript. For instance 7.3 metres depth would look like: 73
Also I've seen charts with depths as fathoms and feet so 64 feet depth would be 104.
Any good chart I can have that prints a sample of all the pens?
View 6 Replies View RelatedI've been tasked with creating electronic versions of some older AutoCAD drawings for which only hard copies exist. There are a lot of them, so in an effort to expedite the process I thought I would try to scan the drawings and scale them appropriately so that I could just go through and trace the lines. I was planning on doing some sanity-checks of the measurements in the AutoCAD and actual drawings as well. This would save me the time of having to measure the length and angle between each of the lines on the drawing (to which there are wild variations) before drawing them in AutoCAD.
The problem is that these drawings were printed on some really large paper (Ex: 4ft by 6ft), so I can't really use a desktop scanner. My thought was that I could mount the drawings on a wall and take photographs of them using my camera instead. I would use the photographs to trace lines in AutoCAD.
I have PhotoshopCS, and have made some 'book cover' templates for my electronic FlipAlbum program. The covers are kind'a nice, but they have that 'totally flat' appearance. How could I go about giving these book covers that rounded over effect, at their binder's edge?
View 2 Replies View RelatedCan I develop an Interactive Electronic Manual with In Design or do I need to buy another program?
View 3 Replies View Relatedi no how to creat point in civil 3d but in map i can not figure it out... what i am trying to do is to creat a point for 100 drill holes and be able to creat a chart for the cords. so i dont have to use the tracking comand for each one and right them down. its getting very old.. i only have 2012 map 3d. if i have civil 3d its no problem...
View 9 Replies View RelatedI need to make a thread of 8 D.P.I on a diameter of 104.8 mm.It's not a standard thread size.Where is the excel file with the ANSI threads?
View 9 Replies View RelatedI'm looking for an autocad text size chart. . . Where I could obtain this information?
View 2 Replies View Relatedknow a way to export lots mtext from a chart in AutoCAD (I am use Civil 3D 2008 currently) to a text documet (Excel, notepad, word . etc.)
View 7 Replies View RelatedIf I was to make a chart in excel or word can I insert this into autoCAD and have it so I can adjust this in CAD?
View 3 Replies View RelatedI have an embeded excel chart on my drawing called CLASS 125 Single Disc.xls. I want to switch this chart with another one known as CLASS 150 Single Disc.xls. How do I do this? I am using Autodesk Inventor 2011.
View 9 Replies View RelatedI was trying to use data extraction to create a table that can list the blocks in the drawing and descriptions in AutoCad 2012 windows version. the software didn't recognize my blocks. When I starts trying at my mac version of 2013, I am even more confused on how the create a table that can list the blocks in my drawing.
View 2 Replies View RelatedHow to create hole or drill chart table in AutoCAD LT 2014
View 3 Replies View RelatedIs there a way to control the annotations text height in Hole Chart, I like fx. 0.1mm in text height
how do I do that
My product:
Product Design Suite Ultimate 2013 English, AutoCAd Mechanical
I want to add a text height chart to a dropdown menu in the Quick access bar.
I have the Dropdown made but forget how to add the chart.
How can I do an organizational chart in photoshop CS2 as the one showed below with buttons like the one in the other attach picture?
View 3 Replies View RelatedLately I was asked to make organization chart for my assignment. Does Abode Photoshop finish my task? I means that does using this software have many step to do.
View 7 Replies View RelatedVector, RGB color chip chart that will open/import in CD X5?
I have a CMYK one but the colors don't convert very easily when i'm printing on my digital printer.
I cut and pasted a pie chart from MS Excel into PS, but when it prints, the imagery looks very low res, with jagged lines and text. Is there anything I can do differently, or is this a limitation due to Excel?
View 9 Replies View RelatedCopying an excel chart (2010 and/or 2013, Windows 7 Ultimate) to Illustrator CS6 works okay if line chart lines are solid... but if they are dotted, then in Excel 2010, the dotted line becomes jumbled, and in Excel 2013, the dotted line converts to a solid line... is the only solution to this to save the excel chart as a pdf, or is there another workaround?
Essentially, I am creating a chart in excel and adding a few notations and graphic elements in illustrator for professional publishing..
I'm using Autocad Civil3D 2011, Version 3. Just yesterday I noticed that the file date shown in Autocad's open file dialog box shows an earlier time than Windows Explorer, which shows the file date and time correctly. When I enter the "time" command on the autocad command line, the correct time is shown for the "last updated" time.
For example:
The Autocad open file dialog box shows the file having a time/date of 4/23/2013 3:54 PM
Windows Explorer shows the file having a time/date of 4/23/2013 4:10 PM
"TIME" command at autocad prompt returns the following:
Current time: Wednesday, April 24, 2013 3:55:35:454 PM
Times for this drawing:
Created: Thursday, March 27, 2008 5:49:57:104 PM
Last updated: Tuesday, April 23, 2013 4:10:56:299 PM
Total editing time: 17 days 15:31:26:967
Elapsed timer (on): 17 days 15:31:26:967
Next automatic save in: 0 days 00:09:58:237
I rebooted and restarted autocad, and resaved my file with the same results (although with different times-but again the autocad open file dialog box showed an incorrect, earlier time). I have never had this problem before, and it is driving me crazy as I usually sort my files by date to assure that I am working with the latest file.
How to set civil 3d 2012 to automatically load your templete file at start-up instead of a misc. drawing file with no styles or anything.
View 2 Replies View RelatedI have a surface, to which I've added data from a ENZ file. No problems - I had a workable surface. I want to be able to work on the drawing at home as well as work. So I brought home the DWG as well as the ENZ file thinking that if both were in the same directory, it would work OK. But I get an error saying the Point file can't be found. I can't see any way to make the file reference relative, rather than absolute.
View 5 Replies View Relatedi have any problem about export point from dwg to *.txt file.i have point file *.dwg from my friend,,but i confused why that point can't export, show warning "No point were transferred from the source" point is in layer 0...I attach the dwg file.
View 5 Replies View RelatedCivil 3D 2013.One of the problems my team has is that we have a number of remote offices that all work on the same drawings. To ensure integrity of the drawings, we use a Wide Area file replication and locking service to ensure the files do not become out of sync and corrupted between offices.
AutoDesk seems to open and save files and their subordinate xrefs serially in a single thread instead of in a multi-threaded manner. Because of this there is a Huge time impact on just opening and saving files at remote sites as a result of Civil 3D having to wait for the home office file lock check on each and every file before opening the next file.
We have 100Mbit down / 20Mbit up transmission links at both sites dedicated to the file replication, with Gbit backbone in both offices.
note that the remote site has a full copy of all files in its replicated share. These local files are what Civil 3D is opening. No Files are being transferred during file open unless a remote change has just occurred (proven through replication logs).
When the drawing file is opened for editing, a file lock check is performed and Windows waits for the response to ensure it can be opened for editing before telling Civil 3D. When Civil 3D has this file open, it has a list of all the xrefs for this file. Civil 3D then seems to open each file in sequence.
This is a problem when a large latency is introduced through our 3rd party Wide area file system by a remote site file lock check.
This is not AutoDesk's fault but the compounding of the two system's operational behaviours, causing a Very long wait on file open, Save, PaperSpace operations (30 minutes for large drawings).
I would like to see a multithreaded (threadpool) file open occur against the entire list of xrefs (during save as well). Then recursively executed for all subordinate xrefs of those files until the operation is complete.
As long as a file list is maintained during the operation and updated as each file operation completes (which obviously it is) in the primary thread, this should not cause any problem. All dependancies can be opened in sequence once the initial file operations are complete and when a particular file in the list is required but not open yet, it's priority can be raised in the threadpool.
I have Photoshop cs5. I also have the Epson R1900 printer. I love this printer but if I don't print enough the heads get clogged. Any RGB color codes or a site where I can download a color bar page that would represent all eight colors of my Epson printer.
What I want to do is print a 8.5 x 11 page every few days that will use each of the print heads wherefore keeping the print heads from clogging.
Over the years, I've used a combination of Xara and MS Visio for business graphics -- Visio primarily for "boxes and arrows" work given the ease of typing text into any object.
I just spent a few minutes with my new version of Designer Pro X hoping that functionality might have been added and that I could finally eliminate Visio. I didn't see any new text-to-object function, but thought I'd ask here just in case.
I remember there is a way to attach text to a Xara object but couldn't find the instructions.