AutoCAD Civil 3D :: Cumulative Pave / Sub And Base In One Table?
Mar 18, 2011
In C3D 2009 you can generate material tables through "Sections" that tell you cumulative volumes for pavement, subbase and base material in separate tables. Separate, meaning you have to generate each table individually. Is there a way to create a materials table that gives me cumulative volumes for these three materials in one generation of a table.
Note: I am currently generating four separate tables (total volume and 3 material tables, 5 min per table) for each of my corridor driveways - I have 82 driveways total = 328 tables
View 5 Replies
ADVERTISEMENT
Mar 5, 2013
What is the formula used to find the value civil3d pave, base and subbase?
i have attachment material report, the three numbers marked in my attachment are the end areas calculated by the software. So, i want to know how those numbers are calculated .. manual calculated with formula ..
View 9 Replies
View Related
Mar 4, 2013
What is the formula used to find the value civil3d pave, base and subbase? Value of what is needed to calculate it? what parameter values obtained from the lane and shoulders?
View 6 Replies
View Related
Apr 19, 2012
Is there a way to have a table that calculates cumulative hatch areas of certain layers? And if I change the layer of a hatch, the table then automatically updates?
View 2 Replies
View Related
Mar 6, 2013
I am trying to work out a way to set up my Structure Table so that I can show either the Inner Pipe Width OR Headwall Base Width to avoid having Question Marks showing in my Table? Is there a Function in the expressions that equates to a Non-Existent or Null Parameter. Ie.
IF({Inner Structure Width}=???,{Headwall Base Width})
Also, Is there a way to hide Structures from a Table, in particulat, Null Structures?
Currently using Civil 3D 2013 & 2014 SP1
View 1 Replies
View Related
May 1, 2013
I want to get my roads pave quantity measured by area , and get its report by step of every 20 meters, how its possible ?
View 1 Replies
View Related
Apr 6, 2011
Is it possible to add a base depth to the transition lane assembly? I need to do volumes for my road, (pavement, base) but there is a section with a transition (which only has one depth), so that section is off.
View 5 Replies
View Related
Feb 23, 2012
Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
View 4 Replies
View Related
Feb 18, 2013
I want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies
View Related
Jun 11, 2012
I need to have a subassembly for a superelevation where the lane and base slope to the left and the bottom of the sub-base will slope to the right. I was using the LanSuperelevationAOR subassembly, which worked fine with my superelevation when the lane, base and sub-base were all sloping the the left, now I need to edit the slope of the sub-base only to slope back to the right at a -2%.
Windows 7 x 64
8GB Ram
Intel Xeon CRU 4 Core @ 3.07GHz
Civil 3D 2012 .....
View 1 Replies
View Related
Sep 12, 2012
Is there a way to delete all the autocad base layers that come in with my template?
View 2 Replies
View Related
Aug 7, 2013
C3D 2012 SP3 on Win 7 Pro.
I want to generate a report by sample line station that gives me the cut/fill quantities between my assembly(s) sub-base links and the existing ground. I have section sheets cut with sample lines and the EG surface DREF'd. Am I correct in assuming that you need to create the sub-base surface, (for every corridor, I have 18), to be able to get the cut/fill volumes? The corridor is Xref'd into the section cut sheets, so no hope of generating a surface in the cut sheets from the corridor. Can you have the EG surface defined in the Edit Material List and the sub-base as a corridor shape and get the cut/fill volumes? I have tried and I get zeros in the earthworks report.
View 1 Replies
View Related
Dec 8, 2012
What are some workflows people are using for creating P&P sheets?
I have a project that is 8 miles long so I created all the profile views (18) in one base map drawing using the plan production tool and then they are xrefed into my individual sheets.
I'm finding that doing a save or regen take approx. 30 seconds each time. That seems unusually slow to me.
I asked my reseller about it, and their comment was "We wouldn't recommend that many profile views in one drawing".
I assumed (maybe falsely) that if the plan production tool allowed it, then it should work.
View 7 Replies
View Related
Nov 28, 2012
I am trying to xref a base drawing. But everytime I insert the drawing, the scale factor always comes up to be 12. I tried changing it, but it won't let me. I have attached an image of the problem I am getting.
View 1 Replies
View Related
Aug 21, 2013
I just tried to create a subgrade surface using the base link. The surface turned out to be wrong because some of the points in the Lane Outside Super Layer Varying Width subassembly are uncoded. Everything I've looked at seems to be programming related (over my head). Do I need to download a composer for 2014? I didn't see one on the list for 2014.
View 3 Replies
View Related
Sep 17, 2012
I am just beginning to use the Survey features in Civil3D 2012 to generate a base map. When we use the offsets, we are having issues when we have a negative number: BC ST H-.5. The line will not offset, it just comes in directly on top of the original line. When we use a positive number, it offsets correctly: BC ST H1.4 V.1. Is there a setting somewhere that needs to be changed for it to read the negative numbers?
View 9 Replies
View Related
Nov 6, 2013
Is there a way, when you are drawing a polyline, to have the tooltip box show the cumulative length of the polyline, rather than the length of the current segment being drawn?
View 6 Replies
View Related
Jul 13, 2013
I m using geotechnical module in Civil 3D 2013.I get " Depth Top - Base must be set " error.
View 1 Replies
View Related
May 10, 2012
Succesfully producing a slope analysis exhibit using LIDAR topographic base information with this version of Civil 3D? I have followed the instructions as best I can and have had no luck. I am using a trial version and this is a big factor in whether or not I will ultimately make the purchase.
View 3 Replies
View Related
Jul 26, 2012
I have a base drawing with all my pipe networks data referenced in. When I xref this drawing into out drawings some of the pipe styles and structure styles are displaying differently than in the base file. Both drawings have same parts lists and styles.
View 8 Replies
View Related
Aug 2, 2013
I have text in a base dwg next to a c3d s.s. structure table. Looks fine in base dwg. In the plan/profile this is x-ref in the text is on top of c3d table text. visretain is 1, text is not annotative.
View 2 Replies
View Related
Nov 4, 2013
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies
View Related
Nov 5, 2012
Creating a CTB file to mimic a Microstation pen table? I have a client supplied *.tbl (an intergraph pen table file I believe) and how to generate a CTB that will behave similarly (ie. plot nearly the same)..
I can open the *.tbl file in a text editor and it just looks like a bunch of "if, then" statements related to line weights and pattern files....
I have already created a template with the same layers/levels, colors, linewights, etc... (and can convert everything to dgns), but now I need to figure out how to get similar plotted results from both sets of drawings (the dwg and the dgn..)
View 2 Replies
View Related
Apr 19, 2012
I am using C3D 2012 and i know how to create a table showing volumes for different elevation ranges with different colours, but how to show the total cut or fill for the volume surface in the same table so that you dont have to manually add up all of the cuts or fills? or have to display only two ranges?
View 1 Replies
View Related
Jun 3, 2013
I am trying to create a line table. Here are the steps I am following :
First I label the lines I have drawn using a line label type for example Bearing over Distance, then I am going to the Annotate tab, Add Tables, Add Line and Curve and once I get to that dialog box I select my table style that I have already created and the label style I chose to label the line and click on the "apply" box and then "ok" and I see the labels such as L1, L2, etc. and all looks good, except now when I go to use that label style Bearing over distance to label another line, it labels the line with the tags and not the bearing and distance, its like the style is now defaulted to labeling tags and not bearing and distance anymore.
View 2 Replies
View Related
May 21, 2012
Is it bad to make a structure table from a DS? I find I get missing data when I do.
View 2 Replies
View Related
Jul 9, 2012
I had a table in a drawing on layer "Text" and I changed the layer of the table to "Text - Frozen" Then I decided I wanted the table back on layer "Text" and something strange happened. The text in the table appears to be on the layer "Text" but the lines which make up the table are still on layer "Text - Frozen". So when I freeze "Text - Frozen" I get only the content of the table with no lines. When I select the table, it is indicated that it is on layer "Text".
View 1 Replies
View Related
Oct 30, 2013
I have a drawing with two parcel tables in it. I would like the header on one to be Line Table 1 and the other Line Table 2, is this possible? When I change the text in the style, the header in both change.
View 2 Replies
View Related
Aug 23, 2013
We use tags on lines labeled L1, L2 etc... for roads and pipelines (for legal/right of way purposes). We may have multiple lines to describe (differernt section/land owner) and need to start back at L1.
Is there a way to automatically start back at L1 rather than it starting at a higher number and having to reset the number one at a time? Get's quite tedious when you have multiple lines needing number with say lay 20-30 segments.
View 6 Replies
View Related
Nov 13, 2013
Where should i insert my point tables? In the model or the paper space?
in the paper space it seems that i cannot control the insertion scale?? i set specific letter height that works fine at the model but in paper every time i create a table I see different size depending on the zoom I have.
View 1 Replies
View Related
Oct 11, 2010
I want to be able to make a alignment table with northing and easting coordinates for the following:
bop
pi's
eop
Is this possible? The closest I get is to make a curve table with the pi coordinates and no bop or eop coord'.
Civil 3D 2014
Win 7
View 1 Replies
View Related
