We use a lot of annotative blocks with several different scales and often find that they have changed from thier standard names to several *u blocks that do not behave annotatively. I have to go in and explode them once or twice to get them back the right name and they show up as individual blocks in different scales. Is there a fix for this?
View 6 Replies
If you change a view port scale of a view port that contains a bunch of annotative blocks.
How do you change the active annotative scale of all those blocks without individually picking the blocks.
So all the blocks appear the proper size in the viewport.
My company is in the process of updating the entire block library to be annotative or dynamic (depending on the usage) and it's been wonderful for new projects.
The problem comes in when we have to update an existing dwg. When we try to "blockreplace" the new annotative tags for the old non-annotative tags. These tags have attributes, but we have literally not changed anything about the blocks except the "annotativedwg" property within the root block file. When we run block replace, the old blocks disappear completely! they're not at a teeny scale or a gigantic scale, they're not on an "off" or "frozen" layer, they just fully go away even if you say "don't purge the old block that is being replaced".
I usually don't have a problem "doing my job" and just going through and replacing them individually on the smaller sized projects, but most of our projects have upwards of 700 - 1000 tags per dwg. Slightly tedious as you can imagine, especially since I am addicted to finding newer faster better ways to draw.
I know it's not good to use annotative blocks with structure styles because the structure simply will not show up. I've never had any issues thus far using annotative blocks with point styles, but we're getting ready to move to 2013. Our surveyors use the survey database and I wanted to know if they will run into any problems with desc keys using annotative blocks.
Is it bad practice to have blocks set up as annotative? My gut tells me it's not bad practice, but I haven't used desc keys and survey databases much with my block libraries.
How do I make annotative tags, callouts, and blocks non-annotative. AutoCad will not let me change them in the properties tab.
View 1 Replies View RelatedI would like to change our office template to have one text style and one dimension style that shows up at 1/8" tall text in any viewport scale. This would also include setting up the multiple global settings. Is this possible?
View 1 Replies View RelatedI have been able to turn on the annotation for the Mtext, which applies the current annotative scale, but how do I add additional scales to the Mtext object.
ObjMText.Annotative = AnnotativeStates.True
There are obvious reasons to limit the number of annotative scales while your drafting. I don't know that I'm aware of what file errors/issues can come about from using annotative scales. I've read where you should clean up the scales in your drawing but I'm not sure why?
View 2 Replies View RelatedI am trying to extract all of the annotative scales in a drawing, I have found some code which will extract the current annotative scale, but not all.
Dim doc AsDocument = Application.DocumentManager.MdiActiveDocument
Dim db AsDatabase = doc.Database
Dim ed AsEditor = doc.Editor
Dim ocm AsObjectContextManager = db.ObjectContextManager
Dim occ As ObjectContextCollection = ocm.GetContextCollection("ACDB_ANNOTATIONSCALES")
I am having issues with an Annotative Multileader skewing at different scales. It was inserted at 3/16" (1st Image) scale and when I add a 1/4" (2nd Image) scale it becomes skewed at that scale (3rd Image the leader is highlighted to show what it looks like).
3_16 scale.jpg1_4 Scale.jpgboth.jpg
so in one drawing, the annotative scales of the objects are listed as 1" = 30' etc, and in the drawing i have them xref'ed into are 1:30. the only way i can get the annotative txt to show up is to make them non-annotative.
im assuming it has to do with the difference of 1:30 and 1" = 30'.
Am having problems with annotative dimensions in Autocad LT 2010. When I click on a dimension it appears in at least 3 different scales, do not have this problem in Autocad LT 2012 on different computer.
View 9 Replies View RelatedI went to change the annotative scale while working on a drawing and LT 2011 crashed. When I recovered the drawing there are now over a 1000 new layers, I assume related to the annotative scales I had used.
What do I do with this mess? I am scared to start working on this drawing because I don't want all these new layers. I thought a central point of annotative scales was to simplify layer management. What happens when it blows up on you?
Update: I found that I can purge these layers out and just did that. I will give another update if things get weird again.
I've just started to learn how to use Annotative Blocks and i'm running into what is probably a very simple problem. I'm creating a block and want to assign annotative scales to it. Once created, I insert the block into the drawing I need to use it in, and the only scale that shows up is the scale that is active when inserted.
All the other scales I added when creating the block are gone and I then have to assign the scales to the block again. I would prefer not to have to manually assign the scales every time the block in inserted into a drawing.
How to use annotative blocks; I searched the forums and used google a lot but I still don't get it. The problem is me, that is for shure! I have been using regular blocks for ages, and since a year or so I use dynamic block also.
It won't get through to me how the annotative option should work, I try, click and see but none of the results are what I am after.
This is my situation; I clean up a drawing (a building like a house), this I use as an xref. Once it is Xreffed to a new *.dwg I set dimscale to 50. For Nearly all of mij viewports are set to 1:50. All the blocks I insert are scaled up * dimscale.
Like a block that is 3mmx3mm is inserted as 150x150. Now, in some occasions, I have 2 viewports with a different scale. One is 1:50, the other is 1:100. I want the block to look the same in the 1:100 VP as it does in the 1:50VP. But it ain't happening.
If I insert the block when dimscale is 1, then the annotation works, but is it worthless in modelspace for the blocks are a factor 50 too small.
I've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.
In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.
The attached file shows a simple example.
I found this LISP code that can insert a block at coordinates from an ASCII.
(defun c:universal( / file f a osmode);PointsToBlocks(while (not file)(setq file (getfiled "Input file" "coords" "txt" 4)))(setq f (open file "r")osmode (getvar "OSMODE"))(setvar "OSMODE" 0)(while (setq a (read-line f))(command "._insert" "block1" a 1 1 0))(setvar "OSMODE" osmode)(princ)
What I want to be able to do is insert blocks from an ASCII and also set the x-, y-, and z-scales.
For example, I have these lines in ASCII, the data points refer to X position, Y position, Z position, X scale, Y scale, and Z scale.
30.593589,21.274607,26.235255,0.172826,0.766324,0.066442
30.710182,21.379792,27.054248,0.130816,0.700035,0.043114
I'm currently trying to make an MV block which is a combination of a 2D symbol and its 3D representation. I want the 2D symbol to scale in line with the annotation scale so have set the annotative flag on my symbol block but I do not want the 3D representation to scale so this does not have the flag set. However, when I put the two blocks into my MV block and then alter the annotation scale, both the 2D and 3D blocks both scale.
Is there something more that I need to be doing to to make the two blocks act independently and comply with the annotative flag set on them? I have seen this behaviour work on MEP2013 but can't see anything different on its 'devices' and my simple blocks.
When I worked for my previous firm, they had a library full or blocks that would change scale by picking from a small pull down menu on the block itself. I could automatically change a section of a 4" CMU to an 8" CMU just by picking from the options. I am trying to create some of those now. Are those dynamic or annotative blocks. What is the parameter I would use.
View 9 Replies View Relatedi have created a block or several and made them annotative and I have worked with them, and the drawing for some time now without any issues. However, randomly during work, I suddenly noticed that all annotative blocks are displaying every scale associated to them all at once.
Upon closer inspection it turned out that different instances of a block with different values of attributes have been inserted as separate blocks with randomly generated names *U808, *889 etc. Each one of these generated blocks has in itself lines and text values, but duplicated or triplicated, in different sizes matching what have once been scales.
I cannot edit these generated blocks, they are not listed when I go to BEDIT.
Even blocks that didn't have any attributes, a block that is only a single circle, has been corrupted in this way.
P.S. I use AutoCad 2012.
I have been making blocks Annotative by using block Editor. I would open block Editor and change the block property to annotative. When I do that I notice that the block's attributes become unreadable. The block's attribute appears to become so squished up the I can't read it. I have tried to change the attributes width to make it readable but that does not work.
View 3 Replies View RelatedI have a file I received from a consultant that has an annotative block in it. I've been trying to xref (attachment, not overlay) it into our files, and it's not showing up. I've got the affected layers on, the block units for both files are identical..
This block has editable attributes in it. The attribute is what is not showing up...the point, which is the other block component, displays correctly in the xref.
I just called up a drawing I haven't worked on in a while. All the text is annotative with 2 scales, 1/8 & 1/4 and worked just fine. Now I see both scales at once, I can't get "grips" on it, it won't edit, and when I list it, it comes up as object type block "*uxxx", not text. If I explode it, it becomes text again, but as two separate notes of different sizes, and both remain visible, even though the anno scale is set for 1/8. Drawings that reference this also show both scales at once.
View 4 Replies View RelatedWhy are Multileaders with Annotative Blocks not possible?
View 6 Replies View RelatedI'm fairly new to using annotative objects, and I am having a lot of trouble with blocks and annotative multileaders.
I made a custom block (_ValveCallout) to be used in an annotative multileader, which was working perfectly, until I needed to edit the block I was using in the multileader. After I redefined the block, the attributes in the block seem to be displayed at the wrong scale, and the border around them isn't even showing at all. I have to redraw every multileader if I have to make a change to the block.
When I insert Annotative blocks and change the scale drawing (E.g. 1:100 to 1:200), attributes of Annotative blocks move to anywhere. I tried already ANNORESET and ATTSYNC, and it solved at that moment. But when I close and open the file, the problem appears again. I have to apply ANNORESET and ATTSYNC every moment. How can I definitely solve this problem?
View 4 Replies View RelatedI have created a block in the model tab with the annotative scale set at 1'-0" = 1'-0" with the UCS set to World. When the block is inserted in model space either on the model tab or thru viewport it displays and prints correctly. However when the same block is inserted into paperspace on a layout tab the block appears correctly but when printed either hardcopy or PDF it is rotated 90 degress around its insertion. This malfunctions the same whether it is inserted directly or nested in a legend block.
It is also not one particular block or drawing but (mal)functions across drawings and block definitions.
I really don't want to have to make two sets of blocks for the project.
I have inserted an XREF with annotative blocks. The blocks in the original drawing are 1:1. In the new drawing I want to plot the XREF at 1:250. How do I set the annotative scale to the blocks with out adding scales to the original drawing?
View 1 Replies View RelatedI'm trying to create blocks which will be used in multiple drawings for Gridlines and detail marks.
These blocks are basically a circle with an attribute in the centre, and once created as a block are annotive as they will be displayed in multiple viewports.
I can create the block with attribute fine using the "block" command which then allows me to make the block annotive ( The "wblock" command dose not allow this )
However when I insert the block into a drawing I need to explode the block before I can edit the attribute ( even though I explode the block it's still actually blocked )
It's as if the block has been blocked twice?
I have a steel angle block cut in section with the ANSI 32 hatch pattern with a hatch scale of 2, the hatch is annotated. The block was created at 1:1. When I insert the block into my section (Anno scale @ 3/4" =1'-0")
The hatch pattern is way out of scale unless I change the annotation scale of the section to 1:1, then the hatch pattern for the block I created looks correct. I tried using the "Annotativedwg" command but I do not need the oblect lines of the block to be annotative so this did not work.
I have a drawing with some annotative blocks. ie Block name "BAR'.
If I insert another drawing (mostly old v2000 files) as a block which also contains blocks named "BAR" (which of course are non-annotative) the Blocks do not show up.
Is there any way to get arround this? Idealy I would like the old file inserted and have the annotion scale of the blocks in the inserted dbg set to the current scale.
