AutoCAD Civil 3D :: 2014 Not Holding Transformation Settings?
Jul 18, 2013
The transformation settings are changing every time a drawing is reopened. The computation method is switching from "reference point" to "unity" - see attachment. This is causing the software to use a scale factor of 1 instead of the computed scale factor at the defined reference point when scaling our points from state plane to our local ground system. This completely screws up our entire survey workflow that we have been using for almost 2 years. We had no issues like this in the 2012 or 2013 versions.
View 1 Replies
ADVERTISEMENT
Jul 29, 2013
I have geotif images that I've purchased from Washoe County GIS. They have world files that work great with data connect. That is, as long as I want to work at sea level. We have a Combined Factor mandated by the County for all record maps. it's a simple grid to ground factor. I can set this factor in the drawing settings and import my sea-level coordinate files just fine. The pboblem is that I can't get the Data Connect to work with the transform settings.The problem is the same with Geotif files and SHP files. I've tried using an x-reference drawing to insert the Geotif and then scale up the geotif but the imagery doesn't scale up.
Is it a program bug that keeps Data Connect from recognizing the transformation settings?
View 7 Replies
View Related
Dec 11, 2012
My Mac PS CS5.5, vs. 12.1 is behaving strange when more than one photo is open. I don't like tabs, so I've turned that off in preferences. I need to have several photos open at once, and like to spread them over the desktop to see them all at the same time. When I click on one photo, the others are behaving erratically: some are changing to show the same photo I clicked on or part of it. It's as if each window is connected. How do I turn that off or otherwise fix the problem, so that I can view each individual photo and even make changes to it, without it effecting the other open photos?
I have already tried rebooting and deleting the settings file by booting PS while holding down the command, option, and shift buttons. And I checked for updates, but looks like I have the latest.
View 8 Replies
View Related
Mar 1, 2013
I need to scale up about 300 circles (manholes) but i need to hold the center point of each manhole. is there a command for this so i don't have to scale each individual circle?
View 6 Replies
View Related
Mar 1, 2012
I have some transformation parameters from WGS84 to ED50 and I dont know how to use them...How can I use these transformation parametrs in Civil3d ?
View 1 Replies
View Related
Mar 15, 2013
I am giving a drawing containing all the contour objects in a NAD 83 coordination, I need to transfer them to a project coordination system. I am given with the origins of both system. For NAD 83, it is N6360000 E467000, for the project it is N50000 E8000. I tried to do the transformation using Toolspace->Settings->Drawing Settings->Tranformation, and changed the Local Northing/Easting and Grid Northing/Easting, but does not seem to solve the problem.
View 1 Replies
View Related
Mar 27, 2013
I am using Civil 3d 2012 and I have a dwg that is in AR North Nad83. The client needs it put in UTM 15 Nad83. Is there an easy way to do this?.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
View 5 Replies
View Related
Nov 20, 2012
My group is trying to convert a dwg from one coordinate system to another. The original drawing contains points, blocks, etc. in 1 system and we need it in a different one. We tried attaching the dwg to a new map with the new system using a layer query, but this did not appear to bring in the objects into the new system.
"Structures" is in the original system (OR83-NF), "StructuresHarn" is in the desired system (ORHP-NIF)
P.S. C3D 2011
Civil 3D 2013, HF3.0
Windows 7, 64-bit, SP1
View 2 Replies
View Related
Feb 21, 2012
I am using Civil 3D and Map 3D 2010.
I have some points in a drawing set up in a coordinate system and using a specified point file format, I successfully exported them to another coordinate system for use by our surveyors. I also wanted the pipe route in my destination drawing so I created a shp file from a polyline representing the pipe route in the original drawing using Map 3D Export. When I imported the shp file into my destination drawing there appears to be a slight horizontal difference from the point locations. The shp file doesn't land directly on the points.
To try another comparison, I ran a query on the pipe route to perform a manual coordinate system transformation. The result of this is the exact same as the shp file.
My questions are, which method (exporting points vs. shp files) results in the correct coordinate transformation and why are they different? When exporting points I am not using any specific transformation settings, I am simply selecting the destination coordinate system. When exporting a shp file, Map 3D creates a prj file from the specified coordinate system in the drawing. Are there any other settings I need to adjust to get the same result with both processes? The only thing I can think of is I only have the coordinates out to 4 decimal places in my point file format, do I need to go out farther?
View 9 Replies
View Related
Jul 9, 2013
I have a created a TIN surface with a DEM file. Drawing coordinates are State Plane NAD 83 feet. DEM file coordinates are UTM NAD27 meters. Surface is shifted approx. 835 miles east.
View 7 Replies
View Related
Feb 19, 2013
If you have a dwg that is, say, done in west zone but some agencies want you to provide a table of west and east zone coordinates is there a transform function that will do this in a label?
I would still wan everything in the dwg to be in west zone but be able to display coordinate values in other zones.
View 4 Replies
View Related
Sep 16, 2013
i am located in Greece and the current progection is GGRS87 .
before the GGRS87 we had a system named HATT with the folowing info:
maps 1/5000 based on the Bessel ellipsoid (1841)
i have many drawings with point coordinates in the old system. is there a way to transform them in the new projection?
what else info is needed for the transformation.
View 5 Replies
View Related
Aug 21, 2013
I am installing AutoCAD for the first time in a lab at a high school. We have roaming profiles for each user. When I launch AutoCAD for the first time as a user, the program goes through it's first time configuration, check the "Privacy Statement" and uncheck the "Show at Start up" on the welcome box. After I log off and log back in and launch the program again, it goes through the setup again and I don't have the setting I had changed on the previous launching of the program. I think it has something to do with the roaming profiles because when I login as myself (I don't have roaming profiles) it works fine.
View 2 Replies
View Related
Nov 28, 2012
I have structures and alignments data referenced. If I assign the structures ref alignments in the dwg with the data refs for labeling, the next time I open the dwg the ref alignments are set back to none, causing the labels to be ?
It seems like this worked in the past?
View 1 Replies
View Related
Jan 22, 2014
Just installed Extension for Maya 2014 SP 1.
When I open a fresh scene, load MR and go to Render Settings my Quality, Indirect Lighting and Options tabs are not working. Quality is minimised to the top left and the others are blank.
I've tried the following :
- Uninstalling Mental Core
- deleting all prefs, scripts etc
- deleteUI unifiedRenderGlobalsWindow; buildNewSceneUI;
Attached are what I see in each of the problem tabs and below is all output from the script editor as I open Maya, load mental ray and then click on each tab in turn.
file -f -new;
// Warning: file: D:/Program Files/Autodesk/Maya2014/scripts/startup/rememberViewportSettings.mel line 43: Active stereo does not work with Aero enabled. Active stereo has been disabled. //
// untitled //
commandPort -securityWarning -name commandportDefault;
// AbcImport v1.0 using Alembic 1.5.0 (built Aug 6 2013 14:15:56)
// mental ray for Maya 2014
// Mental ray for Maya: using startup file D:/Program Files/Autodesk/mentalrayForMaya2014//maya.rayrc.
[code]....
View 1 Replies
View Related
Mar 3, 2013
when I import PNEZD format .csv using import wizard the coordinates get transformed. all points are shifted about 20' in northing and 5 feet in easting. I have to use the import wizard w/ survey database in order to process linework codes.
View 5 Replies
View Related
Aug 13, 2013
It's not just the layer that isn't being displayed in the Properties Palette. My 2014 Properties Palette isn't contextual--displays only the general info--none of the object specific information.
View 2 Replies
View Related
Dec 20, 2013
Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
View 9 Replies
View Related
Nov 18, 2013
I'm using C3D 2014. I created a pipe network, exported it to Hydraflow Storm Sewer, perfermed an analysis, and have HGL/flow data. When trying to import the .STM file, nothing happens. Here's what it does:
1) Import .STM into a Blank/New Drawing -> Creates a pipe network with correct IE, Size, and HGL/Flow Data
2) Import .STM into design drawing -> Choose to Update Network -> No change in network (IE, HGL, etc.)
3) Import .STM into design drawing -> Choose to Create a New Network -> Does not create a new network
I've tried closing C3D, and checking, still no change.
View 1 Replies
View Related
Oct 24, 2013
whenever I try to hatch something the cpu crashes. It even crashes in a new drawing file with nothing in it but a rectangle.
View 3 Replies
View Related
Sep 13, 2013
How to copy from a panorama in 2014?
I know this worked in 2013. In any panorama, Feature Line Edit Elevations for example, you could select certain rows, or all of them, right-click and get a menu with the options Copy All and Copy Selected. These could then be pasted in Excel, or in my cae HEC-RAS.
We upgraded to 2014 a few months ago and hadn't discovered this until today. In 2014, with lines in the panorama selected, a right-click does nothing. I tried again in 2013, and it worked fine, and I was able to get my work done.
Is this a feature that was dropped between 2013 and 2014?
View 5 Replies
View Related
Aug 1, 2013
I have Lidar LAS files in UTM18 and need them in State Plane. Horizontally they come in fine to a drawing with the correct system set. Vertically they are still in Meters. I know a couple of workarounds. But I'm just wondering if there have been any advances in 2014.
We're still on 2012 but I'm testing 2014 I don't want to go through the whole process again if it's not going to work.
Civil 3D 2012 SP 3 / IDSP 2014 HF1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
View 9 Replies
View Related
May 1, 2013
I am getting the following two errors when try to Mapimport either SDF or SHP files. Is there a setting I'm missing?
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
View 9 Replies
View Related
Jul 31, 2013
Rubber sheeting a pdf with 2014? It now asks you yo select an image. Since a pdf is not an image not sure how to accomplish this. WHY DID THEY CHANGE THIS?
View 9 Replies
View Related
Sep 16, 2013
This is my aplicattion in Civil 3D 2014. URL....It´s a tool palette that checks the design criteria (for alignments,superelevations and profiles) according to Spanish rules.My program changes the name of each superelevation curve,for example:
---> With superelevation tool own of Civil 3D (Cuve.1,Curve.2,Curve.3)
---> With my program: (VisorNET Curva.1,VisorNET Cuva.2,.....)
If I calcule again Superelevations using Superelevation button (Calculate/Edit superelevation)of Civil 3D, Civil 3D doesn´t change the Superelevation Curve Names and appears again (VisorNET Curva.1,VisorNET Curva.2,...).Superelevation CurveName property doesn´t exist in settings:
URL....and there isn't a name template. I would like to have this property (read and write----get and set) of settings.Then, I could re-write the default Superelevation CurveName format. (name template)
View 4 Replies
View Related
Sep 20, 2013
I have problem with compatibility this two versions of civil 3D. Files created in C3D 2013 then modified in 2014 don't want to open in C3D 2013. Files contain many civil objects: shortcuts, corridors. During opening occurs fatal error.
There is no problem with files which were created in C3D 2014 from the begining only modified in C3D 2014.
View 6 Replies
View Related
May 20, 2013
See Attached.
Windows 7 Pro x64
Civil 3D 2014 HF1
Dell Precision T1650
i7 3770
NVIDIA Quadro 2000
SSD Boot
16 GB Ram
View 4 Replies
View Related
Aug 1, 2013
One of our Dell workstations has recently decided it will no longer save our CAD drawings to the network. Never had this issue before this week, haven't changed anything that we are aware of. No one else is having network issues. We have connected the computer to a different network outlet at another station, that has no effect on the problem.
When you attempt to save, if you watch the command line it will tell you "Cannot save drawing to K/Work Order/Project/drawing name.dwg, saved copy to K/Work Order//Project/(misc letters and numbers).tmp"
It then deletes the original drawing from its location and saves this temp file.
View 7 Replies
View Related
Aug 26, 2013
I am trying to run a basic hydrology network to get flows and I'm using
1) hydro method: TR-20
2) TOC method: TR-55
I would like to run hydraulic routing specifications as:
1) Link routing method: Kinematic Wave
....., but it seems as though having multiple "outfalls" I cannot run as Kinematic Method.
How can I cheat to create dummy points (junctions/links/etc.) to create a system to have only one outfall because I know you cannot have more than one link connected to the outfall.
View 1 Replies
View Related
Sep 27, 2013
We just recieved 2014 C3D upgrade from 2012. I opened a 2012 dwg and saved in the 2013 file format. now when i attempt to open the drawing in 2014, C3D freezes while loading the drawing. It can't seem to get past "reading triangles from file". Weird thing is i can open a copy of the original 2012 DWG and work for minutes or hours in 2014 saving many times along the way and if i close the DWG and attemp to re-open, it freezes up everytime. I have done this same procedure with other DWG's and don't have any issues.
C3D 2014
Intel Xeon 3.07 GHz
15 GB Ram
Win 7-64 bit
View 4 Replies
View Related
Jul 30, 2013
It is well documented that when text objects using a TrueType font (ie Arial) have a non zero elevation that they do not display correctly. Before we upgraded (in May our office upgraded from C3D2009 to C3D2014) I was meticulous about making sure our text objects always had a zero elevation and we largely avoided any problems.
However in Civil 3D 2014 it seems that by default contour label objects and certain other label objects are given a non-zero elevation (they are assigned the elevation of the contour or in the case of a pipe network object, the manhole rim elevation). Thus the text in these labels displays incorrectly.
This is a very frustrating problem as we are now faced with having to revert all of our styles back to .shx based fonts. Is Autodesk aware of the bug?
View 9 Replies
View Related
