AutoCAD Civil 3D :: SSA 2014 - Create One Outfall
Aug 26, 2013
I am trying to run a basic hydrology network to get flows and I'm using
1) hydro method: TR-20
2) TOC method: TR-55
I would like to run hydraulic routing specifications as:
1) Link routing method: Kinematic Wave
....., but it seems as though having multiple "outfalls" I cannot run as Kinematic Method.
How can I cheat to create dummy points (junctions/links/etc.) to create a system to have only one outfall because I know you cannot have more than one link connected to the outfall.
View 1 Replies
ADVERTISEMENT
Jul 10, 2013
I have a plugin that creates cogo points, and for some users it seems to crash every time, but for others it works just fine (as for myself, I have zero problems with it). The subroutine is simple:
Using civLock As DocumentLock = acadDoc.LockDocument
Using trans As Transaction = db.TransactionManager.StartTransaction()
Try
Dim Location As New Point3d(PointX, PointY, PointZ)
Dim CogoPoints As CogoPointCollection = civilDoc.CogoPoints
[Code] .....
The fatal error occurs when the point is added, prior to the attempt to assign a raw description. What is boggling me is that, like I said, it works flawlessly for me (and others) but not at all for some users.
View 1 Replies
View Related
Jun 19, 2013
I'm new to the architecture package, but not AutoCAD. I just got training and this has stumped my instructor and me. We use half doors in our buildings and can't figure out how to design one. The door and frame that will finish @ 42" AFF.
View 3 Replies
View Related
Jul 10, 2013
How to create hole or drill chart table in AutoCAD LT 2014
View 3 Replies
View Related
Nov 18, 2013
I'm using C3D 2014. I created a pipe network, exported it to Hydraflow Storm Sewer, perfermed an analysis, and have HGL/flow data. When trying to import the .STM file, nothing happens. Here's what it does:
1) Import .STM into a Blank/New Drawing -> Creates a pipe network with correct IE, Size, and HGL/Flow Data
2) Import .STM into design drawing -> Choose to Update Network -> No change in network (IE, HGL, etc.)
3) Import .STM into design drawing -> Choose to Create a New Network -> Does not create a new network
I've tried closing C3D, and checking, still no change.
View 1 Replies
View Related
Oct 24, 2013
whenever I try to hatch something the cpu crashes. It even crashes in a new drawing file with nothing in it but a rectangle.
View 3 Replies
View Related
Sep 13, 2013
How to copy from a panorama in 2014?
I know this worked in 2013. In any panorama, Feature Line Edit Elevations for example, you could select certain rows, or all of them, right-click and get a menu with the options Copy All and Copy Selected. These could then be pasted in Excel, or in my cae HEC-RAS.
We upgraded to 2014 a few months ago and hadn't discovered this until today. In 2014, with lines in the panorama selected, a right-click does nothing. I tried again in 2013, and it worked fine, and I was able to get my work done.
Is this a feature that was dropped between 2013 and 2014?
View 5 Replies
View Related
Aug 1, 2013
I have Lidar LAS files in UTM18 and need them in State Plane. Horizontally they come in fine to a drawing with the correct system set. Vertically they are still in Meters. I know a couple of workarounds. But I'm just wondering if there have been any advances in 2014.
We're still on 2012 but I'm testing 2014 I don't want to go through the whole process again if it's not going to work.
Civil 3D 2012 SP 3 / IDSP 2014 HF1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
View 9 Replies
View Related
May 1, 2013
I am getting the following two errors when try to Mapimport either SDF or SHP files. Is there a setting I'm missing?
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
View 9 Replies
View Related
Jul 31, 2013
Rubber sheeting a pdf with 2014? It now asks you yo select an image. Since a pdf is not an image not sure how to accomplish this. WHY DID THEY CHANGE THIS?
View 9 Replies
View Related
Sep 16, 2013
This is my aplicattion in Civil 3D 2014. URL....It´s a tool palette that checks the design criteria (for alignments,superelevations and profiles) according to Spanish rules.My program changes the name of each superelevation curve,for example:
---> With superelevation tool own of Civil 3D (Cuve.1,Curve.2,Curve.3)
---> With my program: (VisorNET Curva.1,VisorNET Cuva.2,.....)
If I calcule again Superelevations using Superelevation button (Calculate/Edit superelevation)of Civil 3D, Civil 3D doesn´t change the Superelevation Curve Names and appears again (VisorNET Curva.1,VisorNET Curva.2,...).Superelevation CurveName property doesn´t exist in settings:
URL....and there isn't a name template. I would like to have this property (read and write----get and set) of settings.Then, I could re-write the default Superelevation CurveName format. (name template)
View 4 Replies
View Related
Sep 20, 2013
I have problem with compatibility this two versions of civil 3D. Files created in C3D 2013 then modified in 2014 don't want to open in C3D 2013. Files contain many civil objects: shortcuts, corridors. During opening occurs fatal error.
There is no problem with files which were created in C3D 2014 from the begining only modified in C3D 2014.
View 6 Replies
View Related
May 20, 2013
See Attached.
Windows 7 Pro x64
Civil 3D 2014 HF1
Dell Precision T1650
i7 3770
NVIDIA Quadro 2000
SSD Boot
16 GB Ram
View 4 Replies
View Related
Aug 1, 2013
One of our Dell workstations has recently decided it will no longer save our CAD drawings to the network. Never had this issue before this week, haven't changed anything that we are aware of. No one else is having network issues. We have connected the computer to a different network outlet at another station, that has no effect on the problem.
When you attempt to save, if you watch the command line it will tell you "Cannot save drawing to K/Work Order/Project/drawing name.dwg, saved copy to K/Work Order//Project/(misc letters and numbers).tmp"
It then deletes the original drawing from its location and saves this temp file.
View 7 Replies
View Related
Sep 27, 2013
We just recieved 2014 C3D upgrade from 2012. I opened a 2012 dwg and saved in the 2013 file format. now when i attempt to open the drawing in 2014, C3D freezes while loading the drawing. It can't seem to get past "reading triangles from file". Weird thing is i can open a copy of the original 2012 DWG and work for minutes or hours in 2014 saving many times along the way and if i close the DWG and attemp to re-open, it freezes up everytime. I have done this same procedure with other DWG's and don't have any issues.
C3D 2014
Intel Xeon 3.07 GHz
15 GB Ram
Win 7-64 bit
View 4 Replies
View Related
Jul 30, 2013
It is well documented that when text objects using a TrueType font (ie Arial) have a non zero elevation that they do not display correctly. Before we upgraded (in May our office upgraded from C3D2009 to C3D2014) I was meticulous about making sure our text objects always had a zero elevation and we largely avoided any problems.
However in Civil 3D 2014 it seems that by default contour label objects and certain other label objects are given a non-zero elevation (they are assigned the elevation of the contour or in the case of a pipe network object, the manhole rim elevation). Thus the text in these labels displays incorrectly.
This is a very frustrating problem as we are now faced with having to revert all of our styles back to .shx based fonts. Is Autodesk aware of the bug?
View 9 Replies
View Related
Jul 12, 2013
noticed that the file size of pdf's created using the publish command in C3D 2014 are much larger than files created using 2013? I'm talking twice the size in some cases. I've gone through the settings and found no differences, but there must be something I'm missing. When I use the plot command on a single layout, the file sizes are similar, so there must be something in the publish command.
C3D 2014 HF1
View 7 Replies
View Related
Oct 9, 2013
I am trying to migrate our 2012 vb.net code to 2014 vb. I have run into an issue with PointEntity. See below
Dim opt1 As Autodesk.AECC.Interop.Land.AeccPoint
Dim ptObjId AsObjectId = PointEntity.FromAcadObject(opt1)
i need to get the objectID from the AeccPoint. But the PointEntity is not working in 2014. i cannot find the right reference for it.
View 2 Replies
View Related
Apr 12, 2013
Interesting find this morning. In C3D 2014, the MAPEXPORT asks to save the file name, give the file a name, and then nothing happens. I have done a repair and to no avail, nothing. The dialog box does not appear, and no file is created.
View 9 Replies
View Related
Jul 18, 2013
The transformation settings are changing every time a drawing is reopened. The computation method is switching from "reference point" to "unity" - see attachment. This is causing the software to use a scale factor of 1 instead of the computed scale factor at the defined reference point when scaling our points from state plane to our local ground system. This completely screws up our entire survey workflow that we have been using for almost 2 years. We had no issues like this in the 2012 or 2013 versions.
View 1 Replies
View Related
May 28, 2013
stability issues with the Geotech module in 2014?
Seems it takes forever to respond to changing styles/views/visual styles etc and Civil 3D goes into the classic dimmed screen and "Not Responding" mode.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 9 Replies
View Related
Nov 3, 2013
how the scales and printing works.
first i am working in meters .meters is choosen under the drawing settings tab .i am trying to test print at 1:1 a rectangle with 0.2 meters side that normaly will fit in a A4 sheet since the A4 is 0.21x0.297 METERS .
in the print dialogue i set the 1"mm" = 0.001 "units". the result is an image multiplied by 1000...arent the " units " METERS? METERS is what i use in the drawing so why i get a biger image?
if i set 1"mm"= 1 "unit" and NOT 0.001 i get correct 1:1 print .
what i am missing? c3d wants me to give 1mm=1meter?
View 2 Replies
View Related
Dec 9, 2013
I recently created a grading file in autocad civil 3d 2014 that contains grading objects. When I try to open the file on another computer that is using autocad civil 3d 2013, the file will not open and I get a fatal error. I audited, purged, recovered and tried about everything.
View 3 Replies
View Related
May 15, 2013
Just downloaded the GENIO and Civil View tools but the installation fails as no application found - is the installer faulty?
View 9 Replies
View Related
Dec 11, 2013
I'm having an issue with my cad files that were done with Civil 3D 2012. When we made the jump to Civil 3D 2014 all my drawings seem to be corrupt. Now I have pipe networks in my base file. I have tired recovering and recoverall but no luck. I can send the CAD file.
View 1 Replies
View Related
Jul 26, 2013
I need to add label in a pressure pipe in the profile view.
How can I do it?
Selecting a pipe and using add label doesn't work, it works in plan but not in profile.
View 4 Replies
View Related
Apr 30, 2013
I have made some changes to the CUII (URL....) and now when starting Civil 3D the command line stops. Hitting <Enter> bring the command line back to the "Type a command" prompt.
View 3 Replies
View Related
Oct 17, 2013
I have a 2011 template drawing that I've added all the information to that I know about how to survey in C3D. I've used it for a few years now and it works great for us. We now have to update it for used in 2014. IT has told me that I need to create a new 2014 drawing and bring the 2011 styles, groups, etc. into it that way. I used the management import tool to do this in 2014. Seems like all the styles, etc. came over just fine. Any way to test whether or not the template drawing has any garbage in it, such as purging and auditing, so all the bad stuff is gone? C3D - 2014
View 9 Replies
View Related
Sep 27, 2013
I open two different drawings, I'll call X and Y. I make X current. Using the setting tabs of the prospector I go to Y drawing and click the plus and open the styles i want to insert into X drawing. So for example I open <General <Label Styles <Note Elevation and drag that style into my X drawing. I go and look at my X drawing <General <Label Styles <Note and see that Elevation is not there.
I have tried using AeccImportStylesAndSettings and also I'm running the sincpac which has an import civil styles function that does not work either. I went to a co-workers machine and he can get the styles import function to work just fine.
why I may not be able to get this to work? I even tried to create a new layout from template and still could not get beyond the styles that are default to my current drawing. My only option is to create the styles manually and that is, well, not an option.
View 6 Replies
View Related
Apr 23, 2013
I have made several modifications to my default right click menu in C3D 2103 - is there any easy way to transfer these modifications to C3D 2014? (i have posted to the main Civil board but no response)
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 2 Replies
View Related
Jan 3, 2014
Quick question...In Civil 2014 should there be a drop arrow here with the selections "Create Simple Corridor" and "Create Corridor" ?
View 4 Replies
View Related
