In AutoCAD Architecture 2012 we try to use the PDF Underlay to insert PDFs into our dwg files. We have problem to scale the pdfs correctly. We use metric units (mm) and when we insert our pdfs it scales to imperial units. For example, we have a pdf plotted from AutoCAD (or Revit) as an A1-sheet (841x594 mm) an insert it canceled to 1 the inserted pdf (image) get the size 33,11x23,39 which is the sheet size in inch. If the drawing is in 1:100 scale we would like to scale it up to 100 to get the correct scale in AutoCAD but it won't work.
I have tried insunits, insunitsdefsource, insunitsdeftarget but it has no effect.
So I've got a Construct that is the building model. I also have a View file for my 2D extracted elevations. I've just 'Refreshed' one of the elvations based on some updates I did to the construct model. But when the 2D elevation refreshed, it's surface hatching (roof tiles) scaled itself down considerably. What controls this? I need to have that hatching scale back up and don't know how.
I have a dwg template that has a Multileader Style that uses Annotative text. When I changed a viewport to a different scale....from 1"=1' to 3/4" =1', the text is not appearing to scale. It's very large. The Mtext changed to the correct scale but not the Multileader text. Where do I need to make a change?
I have 2 computers with Windows 7 OS and 2011 ACA installed with a custom profile set current. When I select annotative text, right click and select ADD/DELETE SCALE, the Annotation Scale dialog
box SHOULD open.... but it does not. I have this same profile set on other computers with Windows 7 and they are working fine. We have completely uninstalled ACA, wiped the registry clean, and reinstalled...
it's still doing the same thing. I can switch to the Out of the Box profile and the dialog box opens as it should. I'm not sure where to look within the profile for the issue since it's working on other computers.
I have Autocad Architecture 2014 installed on my office PC and Laptop.A drawing with a hatch pattern set to a scale of 1 on my laptop needs to be changed to a scale of 25.4 to look the same on my PC. Both versions of ACA are US metric.
I can't seem to change the DIMSCALE. I want to change this is our template. It is 8'-0" and I can't get it to change to anything else. I get a response of "Cannot set DIMSCALE to the value". I have entered 1....1'=0"....0'=.8333....4'-0" etc., etc. Units are in Architecture Inches. I've unchecked "Automatically Create Dimscale Override"; saved as Default; went to Options...AEC Dimension and unchecked everything in "Automatic Scale of AutoCAD Dimstyles" (don't know if that has anything to do with it).
I am using Autocad Architecure 2011. I chnage the scale of a material (CMU) but it does not update the rendering with new scale. Is there a variable or something that is off?
i have a structural xref drawing that has all the text 10"high. I xref (overlay) that drawing into another one, but that drawing is going to have a scale 1/4"=1'-0" is there a way to auto scale all the text in to xref to become 4" high?
a bit more information
the structural drawing that im xrefing in will be overlayed over my floorplans, then printed at the 1/4"=1'-0"
I need the structural base drawing to keep the 10" text height because some times i have to print off the entire structural plan separate.
I'm trying to plot a simple site plan to PDF through the DWG to PDF.pc3 option.
The scale in my model space is 1-1 and in my viewport in paper space 1-200.
The issue is I plot to PDF, and then the scale is way out. For example an object that should be 10,000mm long in model space appears as 59mm (11,800mm scaled) on the PDF. And of course when I print from the PDF to a printer this scale error carries over.
I just installed autocad architecture 2012. when i opened it to start creating a new drawing/project the unit of measurement was in Millimeters.. i needed the Unit of measurement to be in architectural units, so i used the units command to change it to architectural units. the problem i am having now is that i think the Grid Scale is still in MM. when i tried to draw a line on the grid the line appeared to be tiny. the length of the line was 36'-5". i adjusted the scale to 1/4"=1' but that didnt change anything. in order to see the line that i drew i have to zoom in so much..
How do i adjust the grid scale to be the same as the units?
One of the guys here has created a title block which has a scale field in it, this field reads the scale at which the title block is brought in, by use of an invisible attribute (he used the block in model space so that's why I scale them up). When he xref the dwg into my main drawing all is fine and the scales are as they should be but when he prints, the scales all show 1:1 on the print and in the main drawing. Could this be due to the fact that the xref is brought in at 1:1? But we can't see why this would change it as the block is obviously still at e.g. 1:50 in the xref.
I have imported a ISO Shipping container but the scale is to large. How can I scale it down to architecture setting standard not metric. When I try to use the scale option all it does is makes it larger? I have not search yet do to time restrictions.
I'm using ACA2013. I've been working on making a couple of custom schedule tags and have found what seems to be a bit of a glitch. I have the annotative scale set to 1'-0"=1'-0". Once I have the desired linework and attributes created, I have used the 'create tag wizard'. Once that is finished, the tag is inserted at a much smaller size than the linework I used - 1/10.6666. If I scale the linework and attribute text size by 10-2/3 prior to using the 'wizard' then the tag is created the correct size. Is there something I'm doing incorrectly or is that a glitch in ACA2013?
I'm drawing a gas line (the one that says gas throughout the length of the line) and i can't seem to scale the text 'gas' properly, it seems that it is all squashing up and i cant make out what it says. I've tried ltscale, psltscale and the actual linetype scale of the line to no avail. I'm sure this is a simple problem, i just cant work it out.
I've been using AuroCAD long time ago back in school, and then I moved out to bentlye's microstation after I started working for Jacobs Eng. and now I have to get back to AutoCAD again. My question is how to get the revcloud and text and the revision diamond… and everything to be match with the drawing's size? coz we have stranded in microstation, that’s give you the right size for everything according to the sheet scale.
So I create a block on layer 0 and then create the block as a 1 inch by 1 inch block so it is easy to scale up to the size I need but when I try to insert the block at the scale I need it wont resize it to the correct scale. It stays at the 1 inch by 1 inch original block.
I'm working in a dwg and any hatch pattern displays solid. I've changed the scale to various sizes, and tried multiple different hatches, but they all show solid. This is the first time I'm working in metric scale, but if this is the issue, my measurement system variable is set to 1 and my units are set to metric.
Unfortunately, a new project we have does not allow us to use annotative objects, so we are back to switching scale by creating several dimstyles with a varying dimscale (eg. Dim96, for 1/8", Dim48 for 1/4" etc.) Now I have created a button on the tool palette that brings in text and it allows me to set the size of the arrow by matching it to the dimstyle, but the text comes in always at the same size - 9" which is 3/32" for a 1/8" plan. The arrow changes but the text does not. I know I have to change the CANNOSCALE, but I can't seem to figure out a way of making it work so that the user will only need to switch the dimstyle from the pull down up at the top right and then be able to use a tool palette button that will bring in a text with leader with it's arrow head and text height matching the dimstyle scale.
I have recently started using Architect 2012. We use Architectural Tick for dimensioning.
The problem is the Architectural Tick arrow is not coming in at the proper scale (Arrow head size = 3/32", dimscale varies). The arrow head seems to be out by a scale factor of 25.4 (found by trial and error).
If so is there a software patch or workaround. Can the Architectural Tick block be edited and if so where is it?
I just recently noticed that when I print documents from Revit Architecture, they are printing smaller than the scale size they are set to. I verified with a couple of different scale settings against a good old fashioned scale ruler. It seems to be consistently incorrect.
I want to send a consultant our dwg file as a dwf so they can use it as an underlay. I cannot find any clear info in forums or on web to create it from model space (so 1:1 scale) for them to attach it in their model space. AND when I did try it (just not sure it is the best way), I insert in (as DWF underlay) and it comes in with all white lines & the line weights of everything are way too thick.
I am running Autocad arch 2011 (as Autocad 2011) and a co worker is using Autocad electrical 2012 and when he works in a drawing of mine the every annotative scale that is used in the file is attached to every annotative object. Which means I have to go through every object and delete scales that should be be there....all my annotative objects appear in every view port because every annotative object has every scale..
I'm using AutoCAD LT 2013. When attempting to attach a PDF as an underlay, I go to the Insert tab, choose "Attach" from the Reference panel, pick the PDF I want, and then...nothing. No dialog boxes come up, I get no error messages, it just doesn't do anything at all. I just upgraded my RAM and I know the rest of my specs are up to par, and I did get this feature to work once, but now it doesn't do anything.
I have a pdf underlay in my dwg file and I found I can snap the object in it, end point, mid point, etc. Is this mean there are some ARX functions to retrieve the object in pdf underlay?
I'm trying to import a pdf underlay in AutoCAD 2012. However, every time I have imported it, the frame of the underlay shows up, but the pdf itself doesn't show up.
Contrast = 100 Fade = 0 Monochrome = No Show underlay = Yes Path is correct
I've tried importing image underlays (PNG files), and they work fine. Also, the pdf file is pretty big (about 100 MB), so I didn't know if that affected its ability to display.how to get this to show up?
I haven't used PDF Underlays very much as we're always given CAD backgrounds. In this case, I used them to quickly put in since we won't get CAD files. However, they are scanned PDF's so they are essentially raster images. They have jagged lines, etc.
Is there a way to just lighten these when plotting so I can still use them as my background? or should I just bite the bullet and trace them to get actual ACAD lines to be able to control in plotting?
