AutoCAD 2013 :: Switch To Relative Coordinate Input
Oct 13, 2012
I want to switch to relative coordinate input without using @. How is this done?
I have tried to change the settings in the Snap dialogue box, under Dynamic Input, where I have clicked on the Pointer Input, and the I have marked the Cartesian Format and the Relative coordinates.
View 2 Replies
ADVERTISEMENT
Jun 13, 2012
Does relative coordinate entry work for multileaders? I would like to keep all of my leaders consistent and neat but other than using ost I cannot figure out a way to make them all line up. I would like to use coordinate entry if I could, maybe I am doing things in the wrong order?
View 8 Replies
View Related
Oct 25, 2012
I am using AutoCad 2012, with CADDUCT. On my runs of duct that go vertical, I like to stack my tag numbers beside the riser in order, so our installers can easily identify the order without a ton of section views. I am trying to figure out a macro that will do numerous things. Since my tags come out at different rotation angles, I would like to do the following commands.
Rotate object text "TAG #" to 0 degrees
move object text "TAG #" to "Snap from" & "snap insert" 6" below the tag above it
I want the numbers to align by their insert locations up and down the page, and exactly 6" on center vertically from one another. The tag numbers have a node justified to the center up and down of the text.
View 6 Replies
View Related
Jul 6, 2012
I am trying to write a standard scrpit file for a data extraction using -EATTEXT. I plan for others to use this script file on different computers, so I will not be able to put in a full file path; it will need to remain relative. Unfortunately, AutoCAD will not recognize a relative file path entered into the command line for -EATTEXT.
View 2 Replies
View Related
Nov 19, 2013
I am looking for a way to make xref/image path relative by default. I have not found a solution for that.
View 3 Replies
View Related
Sep 17, 2012
I noticed that relative coordinates are not working in UCS Origin in Autocad 2013.
I used to create an UCS according to a mesh of coordinates (North/East). To do that I first aligned the UCS to the North axis and point the origin to known coordinates (this part is working). Then I created a new UCS using relative coordinates, like "non @ -286200,-7485500".
This relative coordinates entry are not working anymore in this version of Autocad (2013).
View 4 Replies
View Related
Dec 28, 2012
I have a lot of drawings that someone inserted the Xref's, but the Xref's are "Attached, and Full Path"; however, I need to change them to "Overlay, and Relative Path".
View 3 Replies
View Related
Mar 21, 2013
I´m working with AutoCAD Map 3D 2013 on Windows 7 and when I use Coordinate Tracking I used to get fatal errors.The error occurs when trying to select a category from the list in the panel on the left. Strange enough, the error doesn´t occur when I first right-click in the list.
View 2 Replies
View Related
Oct 1, 2012
I a GPS device that plugs into my laptop and I need to get the coordinates into my draw in cad?
View 3 Replies
View Related
Sep 12, 2013
I just purchased the new ACAD2014. It works fine but every time that I launch the program the opening screen shows a grid and I have to turn it off. Is it possible to start up without the grid.
View 2 Replies
View Related
Jul 23, 2012
Is there a way to change a drawing in AutoCad 2012 or 2013 from Michigan Georef to State Plane? Any converter calculator, an add on,etc?
View 2 Replies
View Related
Nov 20, 2013
When in a drawing how do you switch between Imperial and Metric. It seems like it would be such a simple process? When I try to go to Options > User Preferences > Scale List Edit and change it, I then hit apply get back into options and it is switched back to Imperial ? I am basically trying to get this scale list format 1:10, 1:20, etc. instead of 1/4"=1'0", 1/2"=1'-0", etc.
View 8 Replies
View Related
Apr 29, 2013
When I insert a location in CAD2014, there is a dialog for me to chose the position, the default coordinate is WGS84, and of couse there is a list for options. but if there still have no system I need. how can I add the one into this list ?
View 4 Replies
View Related
Jan 3, 2013
When assigning a coordinate system to my drawing in Civil 3D 2013, the drawing does not retain the selected system.
I choose the coord system I want in Map Setup and apply it (in this case MT83IF). After applying to the drawing I go back to verify the selected coordinate system and the dialog box indicates "N/A". The only workaround I can find is to save the drawing back to an earlier version and open it on another computer in the office that is running 2011. There I can assign my coord system and then reopen in 2013 where it now shows it properly assigned.
I have tried other coord systems to make sure it isn't isolated to just the one I am selecting - and it happens with all others I try. I have also tried a repair on my install to see if that would correct it to no avail.
I have a 64 bit system and have installed all service packs to date.
View 3 Replies
View Related
Aug 10, 2012
If i want to move 2D objekts with basepoint to the coordinate 0,0,0 - what i have to do?
In other PC older Autocad was it simply command "move", selecting objects, pointing basepoint and then typing "0,0,0" and object were there! Now the object doesnt move atall. (Can move only to showing second point in screen-but thisway its not possible to catsh exactly point 0,0,0).
View 9 Replies
View Related
Oct 23, 2013
By this I mean, if I set a new UCS with a new "north", can I lock it to this coordinate so it can't be changed?
Normally I would not do this, however, we're working with a company that has asked us to lay out an equipment grid on a couple sites they are setting up, as such: With 0,0 set to a predetermined point, and 100 ft increment grid laid out based off this point, using a laid out line on the site as an east-west, then creating a grid from this line and rotating it to create a "plant north."
Simple enough, except we sent them the dwg of the first one, and when they came back to us with their equipment setup, everything was inexplicably 4 degrees off and they blamed it on us. Oi...
So, yeah, to summarize, we'd like to lock our grid UCS.
View 3 Replies
View Related
Jun 21, 2012
How to switch the direction of text arrows?I’m wondering if there is a way to switch the direction of the text arrows from being left directed to be right?
View 4 Replies
View Related
Mar 21, 2013
I've been working on a project for a bit and so far everything had been working correctly. But recently I must have mistakenly changed a setting I don't know about because now I am experiencing an issue.
When I am trying to enter a unit at the pointer, for example, the length of a line I am creating, if I use a space, AutoCAD seems to be treating it as ENTER and thus I can not specify my unit correctly.
In other words, if I want my line to be 3'-9 5/8" in length, I can type in 3'-9, but as soon as I hit the space bar in order to type in the 5/8" AutoCAD automatically finishes my line at a length of 3'-9".
View 2 Replies
View Related
Jan 9, 2014
How do I get the last input to come up when pressing the up arrow key? Say I'm drawing a line & input @10,10. When I press the up arrow, the coordinates come up. How do I get @10,10 to come up? I've changed it before, but I can't remember how & I can't think of what to search for.
View 2 Replies
View Related
Nov 6, 2013
I am used to entering my fillet radius dimensions in the command line with [F]illet, [R]adius, then entering a value.
However with 2014 an extra prompt has been added (or enabled) which would mean the path was [F]illet, [D]imension, [Radius], value. I was getting frustrated with this and tried fiddling with the settings ([F]illet, [S]ettings) but could not sort it, and now when I do go to enter a dimension the only option I am left with is to "Select fillet arc", meaning I have lost the ability to enter a value in the command line.
How do I regain the ability to enter a numerical value for a radius?
View 3 Replies
View Related
Dec 20, 2013
We currently utilize AutoCAD for our mine mapping purposes. I recently had a seismic study performed to determine the top of salt. I asked for a .dwg file of the contours that were developed. The .dwg file they provided does not have our autoCAD map on it. They are simply contour lines. These contour lines, however, have the same coordinate system as our mine map. The surveyor and I provided coordinate data to the company to develop the contour lines. I would like to lay these contours into our mine map. How do I import the contour .dwg file into our mine map file so that they lay exactly where they should?
View 4 Replies
View Related
Jan 9, 2014
Before when I was creating models the origin (0,0,0) was always set in the snap point i started the line in. Now suddenly something happend and now 0,0,0 is always starting in the Original XYZ point.
How do I get back to the old settings?
View 6 Replies
View Related
Jun 21, 2012
Is there a way to find out the coordinate system and projection of a drawing sent to me? I do not have AutocadCivil3d. I have Autocad2013.
View 3 Replies
View Related
Feb 25, 2013
With AutoCAD 2013 for Mac, is there a way to change the snap/grid icons to words? In older versions of AutoCAD you could rt. click and toggle "use icons" on / off.
View 1 Replies
View Related
Nov 6, 2013
Is there a way to switch to the classic tray view in AutoCAD 2014? What I am referring to as "classic" was the tray that had the more rectangular icons with words in them as opposed to graphics. The buttons would highlight if active. To ensure I am clear on what I am referring to as the "tray": the new tray has smaller, square icons, shown below.
View 6 Replies
View Related
Oct 1, 2012
I want record a macro to update a title block. We've revised the formatting of our title block. The block name is the same, only some appearances change.
I noticed in the insert command, "You can replace an existing block definition with an external file by entering block name=file name." This would be great. I could just type in the block name and the file name and AutoCAD would replace the current with the new version in the file. Then do an ATTSYNC and we're done.
*EXCEPT*
The path and the block name both have spaces in them. Is there any way to make AutoCAD stop taking the space as a return?
View 9 Replies
View Related
Oct 18, 2013
I just learned the input formats of points (like PENZD, PNEZD, etc.). I want to know the input format of Survey. Need information of input format of Survey.
View 9 Replies
View Related
May 10, 2012
I've update AutoCAD 2012 to AutoCAD 2013 and I have a problem when I type "L" or "C" to draw a line or a circle, the command line says "Unknown command "L". Press F1 for help". It's the same thing if I fully type the command "line" or "Circle". But some other commands works normally.
Working on:
Windows 7
Intel Core i7 2.93Ghz
8 Go RAM
NVIDIA Quadro FX 3800
View 9 Replies
View Related
Nov 7, 2013
I was wondering if there is a way for me to setup Autocad so that instead of putting in S 88d20'12" W I could put in something like S88.20.12W so that I don't have to mess with apostrophes or "d." Also, can i do something similar with distance settings? Where instead of saying 5'-6 1/2" I can say 5.6.1/2. I know I could convert the measurements into decimals, but that would waste the time I would be saving with a faster input method.
View 1 Replies
View Related
Feb 13, 2013
Why AutoCAD 2013 turn off dynamic input when we use the insert command. It happens only when using dynamic blocks.
View 5 Replies
View Related
Dec 10, 2012
I made a toolbar button with the macros @, and tried also @ pause.
I need this in order to shorten the procedure for relative coordinate input, but, after pressing the button the last point is entered and i cannot continue entering values like in the manual input at the command like, like: @5,5
Even if i use the "@ pause " sequence it doesn't work.
How to wait for user input?
View 9 Replies
View Related