AutoCAD 2013 :: MS Objects In Viewports Appear Blank?
Jun 11, 2012when I open my .dwg file the viewports are OK, but when I switch tabs then all the viewports in all the tabs are blank
2013 Civil 3D
ADVERTISEMENT
AutoCAD 2013 :: Pixelated Objects Within Viewports Created With Viewbase
Nov 8, 2012The new VIEWBASE tool(s) are pretty cool but I have noticed that the solid objects in the viewports that are created by VIEWBASE tool/command display and plot pixelated. I have changed many normal settings like VIEWRES, WHIPARC, ISOLINES... without any improvement. I did notice that there is a property in the property palette called "Shade Resolution" that I am wondering if it might control this setting. The only thing is that I can't change its value from the properties palette.
I did compare the difference between a normal viewport and one that is created by the VIEWBASE command and the normal viewports display the objects smoothly (see the last picture below)
1) How to fix the pixelation issue?
2) Does this property control the pixelation issue?
3) How do you change this prop
AutoCAD LT :: Variable Visibility Of Objects In Viewports
Jul 18, 2012Why the multileader on the left is not visible in the viewport while it's exploded twin is? There are no layers frozen in viewport, and I can't see any variables under properties that would affect visibility. It's part of a file from a subcontractor. I don't know how it was authored. I'm using LT 2012.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
AutoCad :: Drag Objects Out Without Affecting Viewports In Paperspace?
Feb 14, 2013i'm cleaning up some CAD files i was given. in model space everything's on one layer and there's a lot of stuff that overlaps/sits on top of each other.
there are like 50 associated paper space sheets.
is there a way for me to drag these objects out without affecting the viewports in paperspace?
i could probably start putting everything on layers and turning them off, but i generally like to be able to lay everything out so i can see it all at the same time.
AutoCAD 2010 :: Annotative Objects Not Scaling In Layout Viewports
Oct 30, 2012After drawing in model space(1:1 Scale) I then dimension as needed using Annotative Dimensions, Multileaders and MText using the same 1:1 scale. But when I create the variuos viewports on my layout pages the dimensions aren't scaling to the viewport scale.
This is where it may be partly my fault; When I first started using annotative dimensions etc. a box would pop up asking what scale to use. Because I am dimensioning in model space, rather than always seeing this text box I selected "Do not ask again" check box to always use 1:1 scaling.
These are some of the other settings in place;
ANNOAUTOSCALE = 4
Annotation Visibility = ON
Automatically Add Scales = ON
AutoCad :: Lock / Unlock Viewports / Select Objects To Copy
Feb 20, 2012I was trying to recover a temporary file but as i know now, it's impossible. I entered a few commands relating to grips and something else wich i don't remember, and now I'm unable to lock/unlock viewports and when I select objects to copy and then press _CO or copy button or copy with base point, it deselects the objects and asks me to select them again.
View 8 Replies View RelatedAutoCad :: Binding Only Objects Visible In Viewports And Remove Rest?
Jul 4, 2011Is it possible to bind a drawing and have only the objects visible in the viewport to remain in model space after binding. I'm working with some pretty big models and am trying to reduce file sizes after binding.
View 3 Replies View RelatedAutoCAD Print / Plot :: Text Objects Not Printed In Conceptual Paper Space Viewports?
Jul 3, 2012When printing a paper space viewport in Conceptual Visual Style mode, text objects are visible in the print preview but not in the printout on paper. Why are they not hidden in the preview if they are not going to be printed?
View 2 Replies View RelatedAutoCAD 2013 :: PDF Attach And Viewports
Dec 5, 2013I used pdf attach to insert a pdf into the drawing. I have a plan drawing with viewports that references the drawing file. I tried to turn off the layer in one viewport while leaving the layer turned on in another viewport but i could not get it to plot correctly. It's off in my drawing but when i go to plot its on in all viewports. What is the reason that this happens? my plan file is too large i may have to post it seppartly
View 7 Replies View RelatedAutoCAD 2013 :: Paperspace Viewports
Mar 30, 2012when it comes to viewports in paperspace in 2013, due to the nature of my work i have several layout drawings all drawn on top of each other and all with ther own txt and dims etc, which again is all on top of each other making it impossible to work in model space, for this reason i work in paperspace within a viewport but now i have upgraded to 2013 while i am in mid command e.g. dimension and zoom into first point then zoom back out and in again to second point, by this time i have been kicked out of the viewport and just in paperspace so cant complete the command, doesnt always happen?
View 9 Replies View RelatedAutoCAD 2013 :: Viewports Don't Work?
Jan 7, 2013I have drawn my model and am trying to put it into viewports. I have followed the tutorials provided to the letter, but when I create the viewport nothing shows up.
View 1 Replies View RelatedAutoCAD 2013 :: Viewports Don't Have Boxes
Oct 11, 2012On one of my drawings which was created by someone else, the viewports don't have boxes around them. When you click on them in paperspace, it bring you into model space, and when you click on detail it opens up, but cannot expand viewport., you can't delete it. I want to expand it to bring in detail which is bigger now.
View 2 Replies View RelatedAutoCAD 2013 :: Freeze Layers In Certain Viewports
Oct 11, 2013I'm using Autocad 2013, and im trying to freeze layers in certain viewports, but the VP freeze/thaw button is greyed out for all my layers and wont allow me to freeze anything. I dont want to use the New viewport freeze/thaw button.
View 1 Replies View RelatedAutoCAD 2013 :: Viewports Matching While Pasting
Nov 22, 2013i have
Dwg A: Circle & Square is drawn in the model space and 2 Viewports in Paper Space annotating the 2 objects
Dwg B: Triangle is drawn in model space and 1 viewport in paper space annotating the triangle
i want to bring the Square detail (model and viewport with annotation) from Dwg A to Dwg B,while copying the Square and pasting it in Dwg B with the same reference points, i am having the square object over the Triangle in model space.I do not want to move the triangle since that is matched with the viewport on the paper space and annotated
i want to move the Square to a new reference (while pasting) BUT in a way to have the layout annotations matching and being asscociated with it,
AutoCAD 2013 :: Freezing Layers In Viewports
Feb 6, 2013I'm working with alot of overlapped x-refs and every layer for each x-ref will come in to the drawing. When I'm using the viewports I need to freeze all the layers for some x-refs that don't need to show in that viewport. Since each x-ref has well over 70 layers I am wondering if there is a simple way to freeze all the x-ref layers in the viewport.
View 3 Replies View RelatedAutoCAD 2013 :: Viewports Do Not Stay Locked?
Aug 20, 2012Some of our drawings have the ability for the viewport view to be dragged despite the viewport being locked. Is there an alternate way to lock, or unlock a view besides the option located on the drawing tray?
We are using AutoCAD 2013
AutoCAD 2013 :: Selection Of Overlapping Viewports
Nov 7, 2013Selection of overlapping viewports,I go two overlapping viewports.The issue here that I couldn't access the model space of the small viewport. Double clicking it will access the model space of the big viewport.
View 2 Replies View RelatedAutoCAD 2013 :: Unable To Copy Viewports
Oct 9, 2013So in the last week or so, my C3D 2014 randomly decided not to copy viewports. It copies the box, but nothing in it. Plus you can't go into model space in the copied viewport. Just looks and acts like a normal rectangular polyline. But when you check the properties, it still says it is indeed a "Viewport" object.
Short of reinstalling the software, any setting that would cause this?
AutoCAD 2013 :: New Layer VP Frozen In All Viewports
Apr 24, 2012When hovering over this button in the layer manager the following is displayed.
"Creates a new layer and freezes it in all existing layout viewports. This button is accessible from the model tab or layout tabs".
Key words here being EXISTING and LAYOUT viewports. So I've got an existing xref attached to an existing layout and per the displayed tip this means, to me, any new layer created within the xref that has this option enabled will be frozen in all existing layouts.
Since a layout is a viewport, I assume this means the layout itself, not a viewport object used for viewing modelspace content from a layout.
Even if this means a viewport object used for viewing modelspace content, that doesn't work either, so what exactly is the point of this feature?
AutoCAD 2013 :: Deselect In Viewports When Panning?
Sep 13, 2012I have an issue when working in paper space in an active viewport. As a quick change i want to move a few items and im zoomed in to do so. Problem is, when i select some items, then pan with the 3rd button on the mouse to select more items, it deselcts all the items i previously just selected.
Is there a fix or something i need to change in options for this? In AutoCAD 2011 there is no problem, but my upgrade to 2013 has the issue and its such a pain, i've reverted to the old program.
AutoCAD 2013 :: Viewports Not Plotting Properly?
Apr 27, 2013I've been messing around with a 3D drawing trying to get it to plot properly. I have 4 viewports on the layout, and the issue is that parts of the viewport are being mysteriously chopped off, as if some great big white box is covering part of the viewport. This is definitely not an issue with printer margins - this is occuring in the middle of the page.
I've deleted all the viewports and created new ones, but the drawing is still being cut off in the same locations. 20 sheets of A3 and most of the day later.
AutoCAD 2013 :: Annotative Text Using Multiple Viewports
Jul 9, 2013I am trying to learn Annotative text using multiple viewports. My question: I have text in Model space with Annotative scales to match two different viewports in layout space. Sometimes the text or dimensions for that matter appears in a different place in the two windows. What gives?
View 7 Replies View RelatedAutoCAD 2013 :: 3D Drawing - Views In Viewports Not Stable?
Jan 7, 2013I have 3D drawing. I put camera's in several places and situations. In viewports I choosed a camera in every viewport. They work nice so long the drawing is open. When I close the drawing after saving it ofcourse. When I open it again , the viewports jump to SOUTH-EAST. and I have to rearrange the view of the cammera again. Although I used the command UCSFOLLOW to solve this, but it did not work.
PS. that happens only in the viewports which based on camera's. The views in other viewports which are not based on camer's, stay without chaning or jumping.
AutoCAD 2013 :: 2014 Opening With Multiple Viewports
Jun 5, 2013Every once and a while when I open up a dwg, autocad will load with what looks like two viewports in my model space tab. The bottom viewport is not clickable and the top viewport is very thin and is the one I am able to move around in. I would like to get this to stop.
View 6 Replies View RelatedAutoCAD 2013 :: Viewports In Same Layout Showing Different Drawings?
May 22, 2013Is it possible to show two different viewports in the same layout that show views from two different drawings? So one viewport would show a section of the current drawing's modelspace, and the second viewport would show a a section of modelspace from another drawing? (and possibly update automatically like an XREF?) Or would the easiest way be to just XREF both drawings into a new drawing, and then show viewports from them in the new drawing?
View 3 Replies View RelatedAutoCAD 2013 :: New Features Are Blank?
Jun 11, 2013I'm going through some of the new features/ribbons such as "Design feed" and "Set Location" but when I click on these ribbons, the windows come up blank.
I am signed into my 360 account and the file I'm in is saved to my 360 account as well. why these windows are coming up blank?
AutoCAD 2013 :: Blank Welcome Screen?
Mar 29, 2012My welcome screen is blank.
View 9 Replies View RelatedAutoCAD 2013 :: Create Layout Ribbon Tab With Both Viewports And Modeldoc?
Aug 27, 2012I am curious how the default workspace “3D Modeling” is able to combine ribbon panels from both the acad.cuix file and the modeldoc.cuix file in one tab. See attached screen shot to see where I highlighted the differences between the tab in the workspace and the tab in the acad.cuix file. I am trying to recreate this in my workspace without having two separate layout tabs.
View 2 Replies View RelatedAutoCAD 2013 :: Keep Annotative Blocks In Same Spot On Different Scale Viewports?
Oct 4, 2013Im trying to keep annotative blocks in the same spot on different scale viewports. The main issue Im having is, when i have a lets say house plan in viewport #1 and have all my blocks in place that I moved copyed from my template. When I open another viewport at a diffrent scale the blocks move. Im useing a large number of blocks for electrical symbols we use at work that I need to be in every viewport so we can copy them and place them where needed on the plan.
View 3 Replies View RelatedAutoCAD 2013 :: Activation Window Is Blank
Feb 27, 2013I have try every solution on the autodesk page about the blank activation page problem and it is still not working for me... I have instal autocad and uninstal it multiple time and I always get the error 2738 (probably related) the program is working fine on the trial but it will expired soon. What does the error 2738 mean?
View 1 Replies View RelatedAutoCAD 2013 :: How To Start Out With New Blank Space
Jan 2, 2013I want to start out with a new blank space, but when i click new, nothing happens, and i cant use any of the tools.
View 2 Replies View Related