I use a plug-in that prompt me for a keyword. In the 2012 version of AutoCAD I could press key down to get a drop down list on the mouse pointer with all the keywords, see attached image. In the 2014 version I don't get this choice, I only get the possibility to choose keyword from the command line at the bottom. Is the functionality with key down gone in the never versions or can I set a variable so it shows?
View 3 RepliesWhen I try to use a window zoom in a layout viewin model space my window offsets the the right and below the mouse pointer by a consideral distance. Window zoom works correctly in Model Space and in layout view in paper space. It is doing it in all of my drawings New or Old so I'm guessing its a global setting of some type.
View 9 Replies View Relatedhow can i change Mouse Pointer with selection set like type mismatch ?
View 8 Replies View RelatedOn Civil3D 2007, at least on my machine, the mouse seems to move slowly when it is over the drawing space, but moves at normal speeds when over menu or toolbar items and when in other applications. It's almost as if the "resolution" of the mouse changes as soon as it is over the drawing area in Civil3D. The result is that the mouse/pointer falls behind a little bit when you move it, almost like it does when you use a remote computer over a slow network connection. This makes it difficult to have precise mouse movements.
I should also mention that I don't have this problem in any other applications, including Land Desktop 2006. Some hardware specifics: Dell, P4-HT 3.0GHz, XPpro machine, 2 gig of RAM, RADEON X600 256MB video card, single monitor, Logitech Mx500 mouse, all updates current.
How is it possible to make the mouse pointer tilt according to the current ucs?
'Tilt' meaning a deviation in the direction of the crosshairs.
My mouse pointer in Photoshop CS3 has changed to three little finger 'ghosts'. I know this indicates I'm in some special 'mode' but I just want to go back to normal. Whatever tool I choose, the pointer becomes three little 'whatever' ghosts.What is this mode and how do I get out of if?
View 1 Replies View RelatedI am on a Mac Pro with Magic Trackpad. Using Photoshop CS5, the cursor/pointer disappears after a while, and I have to switch to another application, then back to Photoshop to bring it back. The pointer does not disappear over the image window, just over the tool palettes, toolbar, menus, etc. This is a recent development, and I've only ever seen it in Mountain Lion. None of my previous systems exhibited this behavior.
View 2 Replies View RelatedWorking with Wacom Intuos 3 graphic tablet and two screen, my mouse cursor disappears when I go to my second screen. This is just temporary since I only have to switch out of Photoshop and in again and the pointer is back, but since it happens often, it becomes really annoying...
MacOSX 10.7.4, with graphic card ATI Radeon HD 5870
The mouse pointer is lagging when hovering over the layers panel. This is seriously unnerving.
View 23 Replies View RelatedI am using Illustrator on a Wacom 24HD on a PC, which works quite well, except that as a right handed person, the tooltips, which appear to the right of the mouse cursor, are covered by my hand. Windows (and the Wacom settings) both have a left hand / right hand setting which control where a popup menu appears, however, I do not see anywhere where I can control where the tooltips appear, presumably because this is an Illustrator feature, not a Windows feature. Its particular important for this application because tooltips are used for information (such as size when dragging out new shapes), not just for beginners needing a reminder what a button means. To put the tooltips to the left of the cursor instead of the right?
View 1 Replies View RelatedI am creating a game where you have to hit objects to score points.
I would like to replace the mouse pointer with a mallet and on click it should basicly hit down and go back up.
Photo-PAINT fails to correctly determine the mouse pointer position.
No matter what you do, no matter which magnification level you're working in... any rectangle drawn is never put exactly where the mouse button was clicked or lifted.
(1) I've selected the image's edges while drawing a cropping rectangle. See the resulting cropping rectangle miss my selection for more than 3 pixels:
(2) I have selected the lower edges of the gray horizontal rules while drawing a cropping rectangle. See the resulting cropping rectangle miss my selection for more than 3 pixels again:
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I don't know if the section I'm posting this question in is certainly correct but I just can't figure out one thing that "my" GIMP used to possess years ago, while I was using it for the first time. And which doesn't seem to occur anymore after some more releases.
Now, to the point:
I'm using a WACOM Bamboo tablet and -- I need to make my core pointer use decent brushing parameters than my tablet rubber and stylus. The effect I'm seeking is to enable using my mouse pointer as a rubber with increased brush size comparing to the thin brush I'm using while drawing with the tablet. The brush size seems to be the same regardless of which tool I'm using at a time, and it stinks, because if I could use them in a decent way, my work would be way enhanced. I just need to know how to make those two mediums behave adversely.
I note that from time to time I can't see the counter and this is quite an annoyance. When the invisible pointer hover over or passes over an object, the latter will highlight as usual. I have to close and restart the drawing each time due to this issue. Is there an explanation for it, even a solution to prevent this from happening?
NOTE : This is limited to the drawing area only. I can see the pointer in the menu/toolbar area and outside autocad but not in the drawing area.
Using Civil 3D 2012, windows 7 pro 64, Radeon HD6970 video card.
The pointer flickers when in AutoCAD, especially when in menus, between the arrow and the arrow / waiting circle. Also does this flicker with the cross hairs and the waiting symbol when in the drawing window. Have all the drivers up to date no luck.
Have also tried multiple different pointing devices. Also have several instances where text will not move or allow to be modified until I save and restart the program.
I've been working on a project for a bit and so far everything had been working correctly. But recently I must have mistakenly changed a setting I don't know about because now I am experiencing an issue.
When I am trying to enter a unit at the pointer, for example, the length of a line I am creating, if I use a space, AutoCAD seems to be treating it as ENTER and thus I can not specify my unit correctly.
In other words, if I want my line to be 3'-9 5/8" in length, I can type in 3'-9, but as soon as I hit the space bar in order to type in the 5/8" AutoCAD automatically finishes my line at a length of 3'-9".
How do you change the characteristic of the cursor from Hand (Move Tool) back to just being a pointer? This condition only exists in the Develope Module when my cursor is placed over the top of the photo. When I move it off the photo it returns to a pointer. In the Library Module it is always a pointer like I like it to be.
View 2 Replies View RelatedI can't find in new max (2013) settings for zoom. I want to set Zoom about mouse pointer and adjust a bit zoom speed (now it is too much for one mouse wheel step).
I can't find zoom settings in 3ds max 2013. Where they are? I think that in previous max it was in Customize -> Viewports tab. But now it is not there.
I used to have an add-on called Xtabs that would make my drop-down menus (layers, linetypes, etc.) go all the way to the bottom of the screen. In 2013, I changed to interface to classic, so that it looks more like it used to, but the add-on does not appear to be available anymore. Is there a built-in way now to do this?
View 1 Replies View RelatedWhy does the layer control toolbar always state the Xref layers by default. Is there a workaround, or a setting so the layers of the current drawing are displayed by default?
View 2 Replies View RelatedIn the properties and quick properties dialog box the drop down box that shows diffrient arrowhead types to choose from have disappeared, and is blank.
View 4 Replies View RelatedLong, long, keyword hierarchy. Clicking on a keyword takes the focus back up to the keyword filter box. Usually happens if I've used the filter box to narrow down the keywords that are visible. Continues even after the filter box has been cleared. Doesn't happen all the time though. It is a real pain when trying to double click a keyword to edit it as the first click or the double click causes the list to refresh showing only the top entries. The second click (of the double click) then causes whatever keyword is now under the pointer to be keyword to be edited - NOT the keyword under the pointer when I started the double click.
I've seen this happen in both LR3.0 and LR3.2RC.
Windows XP, 32bit.
I'm new to LightRoom and am glad to have found this great resource. Onto the issue at hand:
An ongoing office project is using LR3 to catalog 30 years' worth of images gathered from various media. Some are scans of slides, negatives, or prints; others are images straight from a digital camera. We have three people working on this cataloging project. The lead guy has created keywords on his computer that he uses to tag these images. Is there any way to make sure the keywords he's using on his machine sync with and are available to the other users of the image catalog? If not, is there a file that would have to be shared among the three users to make that functionality happen?
Lightroom version: 4.4 [891433]
Operating system: Windows 7 Home Premium Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Logical processor count: 4
Processor speed: 2.6 GHz
Built-in memory: 6087.8 MB
Real memory available to Lightroom: 6087.8 MB
Real memory used by Lightroom: 523.6 MB (8.6%)
Virtual memory used by Lightroom: 551.5 MB
Memory cache size: 1012.7 MB
Maximum thread count used by Camera Raw: 2
System DPI setting: 106 DPI
Desktop composition enabled: No
Displays: 1) 1600x900
If I am in Library module, select filter Metadata, select Keywords from dropdown (no other filter panels selected), and start to scroll down the list of keywords, I can select keywords by mouseclick, and see the matching photos as thumbs in the main window.
However as I scroll further down, I can no longer select keywords - the mouseclick no longer highlights or selects. This happens rather incosnsistently - by which I mean, the point in the eyword list where the select stops working is not always the same place in the keyword list.
If I click several times on the same non-selecting keyword, LR4.4 jumps to taking 50% (exactly) of processor time (shown in task manager) , and the memory usage climbs steadily until all free RAM is consumed.
This is a small (~8000 image) catalogue, with ~2500 keywords, entirely non-hierarchical.
The catalogue is set to optimise on backup, weekly.
I've tried deleting and recreating the preferences file btw to no avail
2013 Civil 3D locks up when using mouse scroll.
View 9 Replies View Relatedis there a way to make it so that i right click on the mouse, it does the 'cancel' command??
View 7 Replies View RelatedI have a G300 9-button mouse from Logitech and I would like to assign some frequently used commands to each button, is there any way to do this.
View 2 Replies View Relatedmy mouse wheel worked for panning while i am in the middle of a command, put now it stopped working and when i click the wheel i get my osnaps command. how can i get my mouse wheel to pan again?
View 6 Replies View RelatedEveryone so far in the office who is using 2013 has found that intermitently but fairly often (maybe 1 in 8 attempts) when clicking on a tool button it seems to take about 3-4 goes at clicking before the command kicks in, this is with any command and there are various versions of windows and mouse hardware involved.
View 3 Replies View RelatedI recently installed the Student version of AutoCad 2013 on my Mac through Windows 7. I am not able to use the wheel on my mouse to get to the hand tool to move around. When I hold down the wheel, it swipes over to my Mac dashboard. Also the delete button does not delete. I have to use the E command.
View 9 Replies View RelatedI just got a new pc upgrade so I'm walking through everything to see if it all works. Now when I double click my mouse wheel, nothing happens where before it would zoom extents. I'm using a MS Wireless Mouse 5000 with AutoCAD 2013.
I played around with programming the mouse buttons directly, but I couldn't get it to work right. I don't see anything in AutoCAD about a setting for mouse wheel double click. All I see is that it just says that double clicking the mouse wheel should execute the zoom extents command.