AutoCAD 2013 :: How To Create Dim Style With No Text
Sep 4, 2013I want to create a dim style that will suppress the ext line as well as text.
How to I get the text to be suppressed?
I want to create a dim style that will suppress the ext line as well as text.
How to I get the text to be suppressed?
I wonder if it is possible to create a new text style where one can set the text to be already rotated.
I know that it is possible to rotate text in many ways but the styles always seem to be set on the horizontal to begin with.
C3D 2012
Win 7 64 i5
8GB RAM Quadro FX 1800
example: elevation label is 123 and the style setting in simplex, it used to show all in simplex now one of the number is in arial?
i already tried to create a dummy text style with all the correct setting and type a test word and voila - it shows one of the letter in a different font!
I`m working on this architecture project and copied some clean lines to the file from a landscape design project.
Somehow these text styles showed up to my file (more than 50 text styles from xrefs, because of their strange names, even though I don`t have any attachment). And it says that I cannot delete them cause I`m using it.
I`ve tried out everything I could imagine and read about it. It doesn`t work. Now this simple .dwg file is very heavy and with a lot of unwanted text styles. Even if I try to copy just the lines to start over another file, all the text styles go together.
Tried:
PURGE
AUDIT
RECOVER
WBLOCK
TXTMRG (not sure how to use it)
QTEXTMODE
Attached is one of the files that this happened to. As I`m working with a few attachments this happened to all of it. My default text style are "B3_1.5", "B3_2.0" and "B3_3.0". All the other are unwanted text styles.
Text style has no room to specify the lineweight!
I’m wondering why the “text style” has no option to specify the lineweight.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am trying to set up a standard text style converter for multiple companies (32 in all). All are using the same style names, but they change the fonts for their preferences.
What I am trying to do is come up with a tool pallete / tool bar macro to change all styles in a drawing to the new fonts they choose.
Here is my string: ^C^C-STYLE;TITLE-1;COMIC SANS MS;;;;;;;
What am I missing so the spaces in the font name are not read as ENTER in the command? I have tried <font here>, 'font here', "font here", <font here>, (font here)
If there is an easier way other than copy and paste into a new template with them defined.
I got this weird issue when placing my custom made titleblocks in AutoCAD. All the attributes of the block jump to standard text style when placing it in my drawing. Allthough this ain't allways happening. It seems to me like there's a setting for this but i can't find out how.
It can happen suddenly too. Like when i open a new drawing and then add my titleblock, it's like it should be most of the times. Allthough when i start to edit the block (scale/move/copy,etc) it can change like you can see in the drawing below.
Offcourse, as a company, you do not want to deliver your drawings with a titleblock like this.
I need to start doing shaped glass drawings for our new glass supplier who insists everything is viewed from outside. Unfortunately all our drawings are viewed from inside and I don't want my team to be responsible for copying and flipping glass details in case they forget to flip one day.
I can obviously mirror the viewport view by clicking View/Views/Bottom but this is also mirroring any text dimensions, even though my Mirrtext preference is set to 0.
Is there a way to set a dimension style where the text is automatically back to front so it will then appear the right way round in that particular viewport. How to get round this problem without duplicating parts that can then get missed at a later date and not amended?
This needs to work in both AutoCAD 2014 and AutoCAD LT 2014 as we run a mixture in our office.
I am trying to get DText objects to update width factor when I change the Width Factor of the Text Style. We have one style (Simplex) & I hoped to be able to set the width factor of that style to 0.8 or 1.2 depending on what is required and then just insert objects from the tool palette so they have the correct width factor.
This seems to work for MText but not for DText or Attributes. Short of using lisp is there a to update the width factor of DText & Attributes? (hoping to be able to do this on LT also)
Only way I can see for DText is to qselect text and change style to something else and back to Simplex. Only way for attributes I've found is to advance edit block and change text style to something else and back.
AutoCad 2013 & LT 2013
How can create Office 2013 flat icon style with AI CS6?What is technique that used for it? [Like use "Pen Tool" with 2px strok size for divide or .... ]
View 5 Replies View Relatedwe started working in a project in Revit 2013 and at one point we decided to export all drawings to Autocad . I have a huge problem , the Text we used in Revit was Architxt but in Autocad it shows all the text in Ariel font and AutoCad won't let me change it to Architxt again, so far it is fine I can deal with that. the problem is I tried to create a new Architxt text style in Autocad but it shows as Arial font. now all my our projects are missed up , the text shows in Arial font.
View 1 Replies View RelatedI am looking for a way to change the text style used by a table style with Visual LISP. So far I have been able to get the IAcadTableStyle object from the acad_tablestyle dictionary, but there is no property for text style. Is this even possible? Code and results are below.
(defun DumpTableStyles ()
(setq dict (vla-get-dictionaries (vla-get-activedocument(vlax-get-acad-object))))
(setq TableStyles (vla-item dict "acad_tablestyle"))
(vlax-for TableStyle TableStyles
(vlax-dump-object TableStyle)
)
)
[Code]....
Is there any way to lock a text style so that the associated font style can not be changed?
View 2 Replies View RelatedI'm looking for a way to create dynamic text. I have a rectangle representing a sheet of plywood. I have text in the middle of the sheet that says 4'-0" x 8'-0". If I stretch that sheet I'd like it to update the text showing the new size of the rectangle.
View 9 Replies View RelatedFor labels, is the font decided in the general tab under text style or in the text component editor under the format tab? Are there overrides? There seems to be multiple locations for fonts choices when creating a label and I can't find a nice black and white answer.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I like using the edit label text in the lable styles to add additional text and information.
I can turn on / off the backroung mask for all the style but not each.
Is there a way to turn on / off the backround mask of each layout text.
I'm using civil 3d 2012 and testing 2013.
I have inside every text,Mtext contents different text style like Arial_1 , Arial_2.
How i can give all the contents inside one style ? the normal procedure i will enter inside text to enter editing mode and changing text format style one by one. I want it once.
I want to save my routing of entering every text to change its content text style.
(Notice:select all from outside without editing mode will not do the job)
Is there a way to search for a text style in a civil style? I have a text style that our company is trying to get rid of and I would very much like to not have to go through our 72 company styles.
AutoCAD Civil 3D 2014
HP Z620 Workstation 64-bit
Duel Intel Xeon E5-2620 @ 2.00 GHz
Ram: 48 GB
Is there a easy way to change a style of previous drawn text in AutoCAD 2008. Years ago I though there was a lisp routine by Autodesk for that.
View 5 Replies View RelatedI need to create a dimensioning style for an A4 format. So what does this imply? This is for an exam I have in 2 days.
View 9 Replies View RelatedIs there a way to stop Dim Style Override, so it does not automatically apply to new dimension? Without having to go into dim styles and delete style override manually?
View 9 Replies View RelatedI'm using Map 2013 and not seeing how to choose to use an expression to rotate symbols of attached shp data (see attached png file). I see where you can put in a numeric value but that's all. Maybe I am just not seeing something?
The "help" says you should be able to use an expression to rotate a symbol.
Customizing the leader style further,I’m not sure if the leader style can be further customized to obtain the style shown in the attached screenshot.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am trying to dimension using ordinate dimensioning style, but I couldn't get some of the lines to change at specified points by 90 degree, and then to continue parallel to the first line. The default couldn't be bent to 90 degree, and desn't stop at where I wanted to bend.
View 9 Replies View RelatedIs it possible to create a drawing parts-list style from a built parts-list in the drawing?
View 4 Replies View Relatedhow to create a new Table Style definition.
I don't want to create a table on a sheet, I want to define a new style and then assign the style to the existing table.
I have no problem assigning the style once it is defined in the drawing to the existing table.
Dim oTableStyle As Inventor.TableStyle oTableStyle = oDrawingDoc.StylesManager.TableStyles("BOM") Dim oTable As Inventor.CustomTable oTable = oSheet.CustomTables.Item(1) oTable.Style = oTableStyle
There doesn't seem to be a TableStyles collection with an add or create event. I stumbled upon the "TableFormat" object but that seems to only override an existing style.
looked at the "StylesManager" but again I am not finding a create method.
I'm using Inventor 2013 and I'm trying to create a new dimension style that shows a box or parenthesis rather than a dimension. The purpose is so the workers in the field can measure a part and fill in the dimension.
So far the best I can do is make a dimension style that is white so that it comes out as a space. The other option was to manually override the dimension, but I don't want to go into every drawing and change every dimension.
What I would truly like is if the dimension would automatically come out looking like this [ ]
I want to create a line style for feature objects (line object) wich symbols only on the vertex of the line. How can I do it?
View 9 Replies View Relatedis it possible to have multiple plot style tables in one drawing ?
The purpose would be to plot xrefs with plot style table x while maintaining the company's plot style table for the drawing itself. The output would then be a plot in proper style for all parties involved.
This would save us the job of converting the layerstructure we get delivered by external parties to our own.
I recently got a new computer at work but now some of my font styles aren't showing up as they did before: the font is different and the formating is not the same. I still have access to my old computer, which still has AutoCAD on it and the drawings show up fine. I looked in the forum and people have mentioned sending the font style to the new computer but I am not sure how to do this.
View 6 Replies View RelatedI have a huge problem with my Autocad 2013 for MAC, everything is running nice and steady except for one detail, everytime I open the dimension style format to make a new dimension style, autocad freezes (only autocad, rest of my mac keeps working normally) and I cant work anymore, I have to force quit the program and re-open it, but the dimension style I created gets lost. is there something i can do? i already tried by uninstalling it and reinstalling it and this problem doesnt go.
also im new in this discussion groups so if this topic doesnt belongs here let me know before deleting it so i can put it where it belongs