AutoCAD 2013 :: Coned Shaped Object - 2D Surface Creation
May 31, 2012I have a coned shaped object. I want to open it in a 2d flat plane. Is this possible in acad 2013 ?
View 5 Replies
ADVERTISEMENT
AutoCAD Inventor :: Extend Button Flat Surface Diameter 12.5 Upto Shaped Surface
May 31, 2012It is not possible forme to add the fil because it is to large 1.8MB how can I poste then I like to know if it is possible to extend the button flat surface diameter ø12.5 up to the shaped surface. The result should be a total solid block whit a surface shaped hole.
File last up-date with Autodesk Inventor Professional 2013
AutoCad 3D :: How To Surface Odd Shaped 3D Geometry With Single Entity
Jun 25, 2012Is there a way to surface this geometry with a single surface entity?
I had to use 2 lofts to "surface it" instead of region due to lines being non-coplanar with the arc (in other words top most corner is higher than the other adjacent 3 corners).
AutoCAD Civil 3D :: Surface Creation From Corridor
Aug 24, 2012I am having some issues with my corridor. It is for a 1.5 mile two lane section of highway. When I created the corridor, I used 15 assemblies. Now, when I try to create a corridor surface, I have issues. The file crashes when I try to load the surface.
View 2 Replies View RelatedAutoCAD Civil 3D :: Surface Creation For Landfill
Mar 26, 2013I'm using Civil 2012 to create a surface for a landfill. I have UTM coordinates, and my elevations range from about 71m to 115m. When I create my surface using the points, I check the Surface Properties/Statistics, it appears the X,Y & Z coordinates have been scaled down by 3 decimal places. I'm using UTM coordinates to create the points.
Example:
Min elevation = 0.071m .... should be 71m
Min X = 481.510m etc. ... should be 481510.99 or something similar.
Units are set to meters.
AutoCad 3D :: How To Do Draft Angle - Five Stared Shaped Object
May 14, 2013How you do the draft angle of, for example, five-star-shaped object in AutoCAD?
[URL]
3ds Max Modeling :: Make Actual Audio Shaped And Animated Surface?
Sep 6, 2011How can I make an actual audio shaped and animated surface? So that a second or two of an audio file is visible and moves across a plane as a wave or ripple? Something quite often seen in graphics but seemingly quite difficult to make in max.
I do not want a simple audio controlled wave / ripple modified surface as this only has evenly spaced wave lengths and is not a representation of actual waveform data.
So far I have made an audio shaped spline out of an audio controller trajectory and can lathe or extrude this into an audio shaped surface.
But how can I make an animated to real sound surface?
AutoCAD Civil 3D :: Grading Automatic Surface Creation
Aug 7, 2013I attached 3 pictures describing my problem.
On the first one you can see the feature lines i'm about to grade. The closed line is a pond and the two lines on the right is a riverbed. The area between them is just land.
On the second picture you can see a part of the surface i need to get by grading. I need the pond, riverbed and land to be one surface.
On the third picture you can see what happens, when i try to grade the riverbed under the same grading group. The pond surface disappears while the grading stays.
AutoCAD Civil 3D :: Field Data For Surface Creation
Feb 1, 2013I have a 1 mile road topo coming up for design purposes. The curb is standard, but there is full curb & depressed curb. If you had your way from the CAD seat, what shots do you prefer?
Most accurate I've seen iis Centerline, Edge Pavement/Edge Concrete Gutter, Flowline Gutter, Face Curb, Back Curb. More fieldwork, but made a good product.
What I have seen is CL, EP, BC, then "let them just use a template" and several variations thereof.
I have never seen a good way to automatically offset from say BC only and handle depressed curb by field coding.
AutoCAD Civil 3D :: Surface Creation Or Section Views Creating Random Lines
Jun 15, 2012I'm uploading the .dwg and .txt files. I'm trying to get volume calcs cut and fill between two surfaces and when I compare the data between AGTEK's Highway 3D there is different results. I looked into it to find these random line appearing in Autocad making what seems to be the problem. Where are these coming from and how do I fix? Also, if you could anwser how can I insert a sectional following the 12'-23' offsets and dropping 1.16' down and adding it to my design surface. I want to make a big box there added to design surface.
View 1 Replies View RelatedAutoCad 3D :: How To Put Planar Surface To Solid Object Which Surface Is Curved Like Cylinder
Sep 2, 2013I would like to know how can put planar surface to solid object which surface is curved like cylinder for example. When start draw from first point rectangle of planar surface follow x cordinate not that solid object. How to do that simply?
View 9 Replies View RelatedPhotoshop :: Wrap Text Around An Irregular Shaped Object
Feb 13, 2009Easy enough in ID and Ill, sure. However, how do you wrap text around an irregular shaped object in Photoshop?
View 1 Replies View RelatedAutoCAD Civil 3D :: Alignment Creation From Object
Mar 31, 2012When i am creating alignment from object(six 2D polylines) it convert first poly line only to alignment.orther polylines show as a alignment ,but can't label or create profile.
View 2 Replies View RelatedAutoCAD .NET :: Error In Document Object Creation
May 8, 2012using System;
using System.Threading;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.IO;
using System.Runtime.InteropServices;
using Autodesk.AutoCAD.Interop.Common;
using Autodesk.AutoCAD.Interop;
using Autodesk.AutoCAD.ApplicationServices;
using Autodesk.AutoCAD.DatabaseServices;
using Autodesk.AutoCAD.Runtime;
using Autodesk.AutoCAD.EditorInput;
[code]....
Working Environment:-
Visual Studio 2010AutoCAD 2011 C#
After run following error will occure
"An unhandled exception of type 'System.TypeLoadException' occurred in mscorlib.dll
Additional information: Method 'CopyTo' in type 'Autodesk.AutoCAD.ApplicationServices.DocumentCollection'
from assembly 'acmgd, Version=18.1.0.0, Culture=neutral, PublicKeyToken=null' does not have an implementation ."
Revit :: Making Irregular Shaped Mass A Concrete Object
Sep 19, 2011I've created an irregularly shaped mass (column corbel) within a project and would like to make it a concrete object. How do I do this?
View 1 Replies View RelatedIllustrator :: Find Exact Area Of Irregularly Shaped Object?
Feb 19, 2013Is there a way to find the exact area of an irregularly shaped object? If there is, does the procedure work for compound paths (objects with holes in them)?
View 3 Replies View RelatedXara :: How To Create Artificial Reflection Beneath Irregularly Shaped Object
Jul 30, 2011Today's challenge was to create an artificial reflection beneath an irregularly shaped object.
In the past I've been asked to add reflections where the reflection is simply a plane that cuts horizontally across the entire object (example 1), and where the object to be reflected is skewed (example 2) - both operations are pretty straight forward...
Example 3 is the object (a duvet) to which I had to add a floor reflection. I did come up with a solution, which I am reasonably happy with, but would love to see what methods other people use! I guess my attempt is OK because the texture and shape of the duvet is fairly forgiving!
Do you have a better method for these irregular floor reflections?
Example 4 is perhaps the trickiest I can imagine as the entire object is curved and the texture uniform so a bodge job will be very obvious!
Perhaps this can't easily be done in Xara - I imagine it could be painted in a bitmap package or rendered with a 3d package... or photographed with a reflection in the first place!
Xara file here -> IrregularReflecions.xar
AutoCAD 2010 :: Placing 3D Object Raised On Surface Of Another 3D Object
May 2, 2012I've already started using the AutoCad 3D.
how to put a 3D object on top of the another 3D object in autocad"! E.g.,I want to put a 3d object of one leaf (raised 1") on top of the vase, so that the edges of the leaf are placed completely on the surface of the vase.
I extruded the leaf 1" first, then tried to copy it on a solid cylinder of a vase, but it didn't work!!! It seems to be simple, maybe not!
AutoCAD 2013 :: Viewport Creation In Ribbon
Feb 1, 2013I can't find the viewport panel that was in 2010 in 2013. I have a panel for model space viewports but not paperspace.
View 2 Replies View RelatedAutoCAD 2013 :: SaveAs And Block Creation
Jul 21, 2012I have a student that downloaded and installed the 2013 student version of AutoCAD. She then opened a drawing we were working on in class (2012 standard version) and continued to work at home. She is able to save that drawing by clicking the save button on the Quick Access toolbar, however she is unable to "Saveas" that drawing to a different name or different release. The dialog box resets the file name to a file path on her C drive as soon as you move the mouse.
The same thing happens when she goes to make a block - she can type a block name in the window, but as soon as the mouse moves, the name changes to a block name already in the list.
AutoCAD 2013 :: Creation Of Layers Script File?
Jul 22, 2013I am trying to set up 400+ layers for a project I am currently woirking on and the wayI have been told to do this is through a script file.
I have created this but whenever I run it, the description will not show in Autocad 2013 - an extract from the scr file is below and I would love to find a solution or a fix to any error?
'-LAYER
N W-51CD-SEZE------------ C red W-51CD-SEZE------------ LT continuous W-51CD-SEZE------------ D DRAINAGE - EXISTING GRAVITY PIPE (PLAN/PROFILE/MODEL)
AutoCAD VB :: Layer Creation Code Not Working In 2013 VBA
May 10, 2012I have been using a dialog box with checkboxes for creating layers for the past 5 years now with minimal problems. I don't know much about VBA code, but when there is a problem, I can usually figure out what is going on, which is generally a typo the causes it to error. The code was created by an employee that left the company about 3 months after I started.
After installing acad 2013 and the VBA enabler this code only partially works. It will create the layer in the drawings, but will not set the color, linetype or the description. When I click on the checkbox for any of the layer checkboxes I get a "Run-time error '13': Type mismatch" error. I click on the "Debug" button which opens VBA, the "This Drawing.Layers.Add" line in the below code is highlighted.
As a troubleshooting effort, I tried retyping the ".Color" line, when I had typed out "m_refg_pipe_n." a drop-down box appears, but "Color" is not an option anymore. The only color option in the list is TrueColor, which we do not use. In the next line of the below code, "Description" is an option. So I am guessing that the ".Color" line of code is the problem.
Private Sub CheckBox101_Click()
Dim m_refg_pipe_n As AcadLayer
Set m_refg_pipe_n = ThisDrawing.Layers.Add("m-refg-pipe-n")
m_refg_pipe_n.Color = acGreen
m_refg_pipe_n.Linetype = "Hidden"
m_refg_pipe_n.Description = "MN - Refrigerant Piping"
End Sub
AutoCAD 2013 :: Turn Off Automatic Creation Of Log Files?
Sep 26, 2012how to turn off the automatic creation of log files in my drawing folder?
I have unchecked the <Options> <Open and Save> <Maintain a log file> but they just keep on appearing and manually cleaning them out is a real pain...
AutoCAD 2013 :: Template Creation (Title Block)
Dec 18, 2012Is it possible to create a title block in AutoCAD 2013 and have the option to select from a drop down list a Name and Address to place in a certain area of the title block?
View 2 Replies View RelatedAutoCAD Inventor :: 2013 Crashes During Break Out View Creation?
Aug 7, 2012I just installed Inventor 2013 (First Mistake) and when I attempt to creat a breakout view, Inventor crashes. The folks at Autodesk are blaming this on my machine running multiple threads. Aren't all modern computers supposed to be running multiple threads?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
AutoCAD Civil 3D :: Profile Creation Error After Updating To 2013-SP2
Sep 13, 2013The company I work for recently updated a few of our computers with the SP2 for Civil 3D 2013. After this update, every time I create a surface profile, things get all messed up. Like I have done dozens of times before, I create the profile then open the profile creation tools. I am using the draw tangents with curves tool and as soon as I click my first tangent point, it shows up about an inch over to the left. I have struggled through and used the grips to edit after the fact but this used to be a VERY easy task. FYI my snap isn't on or anything goofy like that and when opened on a computer without the service pack, it works as it should.
View 7 Replies View Related3ds Max :: Object Creation Colours Not Randomly Assigned
Jun 9, 2011After installing SP2 for 3ds Max 2011 (Windows 7, 64-bit), whenever I create a new object, the colour swatch in the 'Name and Color' rollout is always white, however, the actual colour assigned to each newly created object is not white, but is the same for all objects created (seems to be a different choice of colour after each restart of Max). If I click the colour swatch, 'Assign Random Colors' is checked and I can manually assign a different colour to the object I've just created and the colour swatch is updated to reflect my choice. If I continue creating new objects, the same colour as initially applied is assigned and the colour swatch is again white. If I uncheck 'Assign Random Colors' and create new objects, the colour swatch is again white and the same colour as initially applied is used.
View 1 Replies View RelatedAutoCAD Civil 3D :: Hatch Creation Ribbon Contextual Tab Causes 2013 To Hang?
Dec 16, 2012When I try to access a hatch pattern from the Hatch Creation Ribbon Contextual Tab, C3D stops working and I have to force the program to quit. I've tried repairing the installation, which didn't work. I've also compeltely uninstalled and then reinstllaed the program, and have applied the Service Pack 1 update, but the problem persists.
However, accessing a hatch pattern after using the "Hatch" command from the command does seem to work.
GIMP :: Detection Of Object Boundaries In Raster Image And Automatic Creation Of Paths
Jul 2, 2012GIMP script/plugin for detection of object boundaries in a raster image and automatic creation of corresponding paths?
View 2 Replies View RelatedAutoCad :: Get PIC Onto The Surface Of Object?
Dec 13, 2011Anyway I can get a PIC onto the surface of an object?
View 5 Replies View RelatedAutoCAD Civil 3D :: Insert Object In Surface
Mar 20, 2012I am wondering is it posible to insert object, building in surface? I draw object with box and gave it z coordinate. the goal is that it shows in profile. also, can feature line with greading be shawn in profile?
View 5 Replies View Related
