AutoCAD 2010 :: Turn On Equivalent Of VP Tools In Model Space?
Mar 1, 2012How do I turn on the equivalent of VP tools in Model space. ie [+] [Top] [Wireframe]
View 6 Replies
ADVERTISEMENT
AutoCAD 2010 :: Turn On The Vport Label Menu In Model Space
Feb 17, 2012How do I turn on the "Vport Label Menu" in Model Space.
View 1 Replies View RelatedAutoCAD 2010 :: Changing Between Model Space To Paper Space Locks Application
Apr 12, 2013In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
AutoCAD 2010 :: Fields In Model Space To Paper Space?
May 2, 2012determine if Fields can be used in model space inside a block and show up in the paper space view as a correct number, (say for a detail number)? I have all of my detail blocks in model space and would like to place fields in the title blocks of the details so that they would show the paper space sheet number that they are being shown on in paper space. I have done some experimenting and cannot seem to get it to work. Or will this just not work?
1.- Details in model space are blocks, and I want to edit the block and insert a field into the detail callout.
2.- I want to have the model space detail read the paper space drawing number, and have the fields change to the proper sheet number.
3.- The result will be the that the model space block fields have changed to the proper detail sheet number shown on the paper space border.
AutoCAD 2010 :: Model Space / Paper Space Display
Mar 15, 2012I have a drawing that has several Paper Space tabs, and each tab has one or more viewports.
When I open the drawing, I can see all the information in Paper Space mode, and I can access the Model Space through the viewports, using the MS command. When I switch to Model Space, nothing is displayed.
AutoCAD 2010 :: Multileaders In Paper Space But Want In Model Space?
Mar 13, 2012So I just recieved drawings from a contractor and they placed all the multileaders and details on the paper space but when I go to change the model space things are no longer pointing at the right spot.
What I am trying to do is copy them into model space but.... when I use crtl-c from paper, crtl-v to model it doesn't scale properly.
AutoCAD Civil 3D :: Model Space To Layers Manager And Turn Off A Layer
Nov 13, 2012In model space if i go to layers manager and turn off a layer why does it still show up in model space. Civil 3d 2013
View 4 Replies View RelatedAutoCAD 2010 :: Rotate 3D Model In Model Space?
Apr 13, 2012Basically I've got a detail specific to my design, I've extruded all of the layers up to their desired levels etc, but now I want to be able to rotate it all so that instead of these layers being orientated vertically, they are orientated horizontally, if that makes sense. I understand that there is something involved with the UCS but I'm not sure how to get this to work. This may be an issue with my computer as I know my laptop graphics card is pretty rubbish and impacts a lot of 3d programs such as Rhino and SketchUp so this could be the issue here
View 2 Replies View RelatedIllustrator :: Turn On Ctrl Shift Alt / Space Bar Options For Selection Windows Like It Works With Shape Tools?
Nov 27, 2012Is there a way to turn on the ctrl shift alt and space bar options for the selection window like it works with the shape tools?
View 2 Replies View RelatedAutoCAD 2010 :: Turn Work Space From The New Ribbon Format?
Mar 18, 2012Just up graded to Autocad 2012 (student version), how to turn the work space from the new ribbon format to the classic workspace, or if it is possible to do so, as know how on the full version but cant see it on student...
View 6 Replies View RelatedAutoCAD 2010 :: Model Space Glitch
Aug 6, 2012I have a file thats doing something wierd, when I open it I can see the layouts just fine, the existing viewports show linework from model space. However, when I switch to the model space tab I don't see anything, my mouse cursor dissapears when I move it over the drawing area but reapears when its moved over the ribbon or the prospector/command prompt. Also, when I create a new layout with a new viewport, nothing is displayed in the new viewport. It's like the program cant regen the view? When I went into one of the existing viewports and zoomed out I could see all the linework in model space but when I switch to the model tab it won't show any linework or the UCS indicator or my mouse cursor!?!
View 8 Replies View RelatedAutoCAD 2010 :: Set Model Space Dimscale In Paperspace?
Mar 19, 2013I dont use paper space at all. i mostly work in model. but i just want to explore the paper space side.
I have my lpaperspace dimscale set at 1
In the model space my picture is drawn to scale, so its like 12 feet tall.
when i put the viewport in and get the picture positioned in the viewport, when i dimension the model in the viewport my dims are set according to the paperspace dimscale.
is there a way i set the dimscale in the viewport at a different dimsale then the dimscale set in the paperspace without having to set the dimscale in the model space?
AutoCAD 2010 :: Multiple Layouts In Model Space
Nov 26, 2013Multiple layouts in model space suddenly stopped showing boundaries.
View 1 Replies View RelatedAutoCAD 2010 :: Rotating Views In Model Space
Oct 8, 2012I have a sheet drawing with all my background xref'd into it. How do I rotate the view in model space so it will show appropriately in the sheet view in paper space?
View 1 Replies View RelatedAutoCAD 2010 :: Multileader In Paper Or Model Space?
Nov 9, 2013in general, I add my multileaders in paperspace after I have set my model space scale. However, I am now bound to that scale! That is, ML in paperspace really only have one scale: 1-1, right? For example, I wanted to zoom in to a part of my project (ie, reduced my scale by a 1/3) and all my ML we pointing erroniously into space.
Just so I undestand, if one anticipates changing the scale of a drawing mid-project, the ML should be made annotative, and placed in model space?
AutoCAD 2010 :: Model Versus Paper Space
Aug 16, 2012I received a drawing form a vendor that is in 3d (27 meg)...this drawing contains the model and 4 paper space sheets.
These sheets contain different pieces of the 3d model. I need to create four 2d drawings (one for each sheet). I have tried "export layout to model" with no luck as most of the drawing does not export. I have tried to copy to clipboard but, drawing is too large for the clipboard. I have looked in the "help" and there seems to be nothing on converting a 3d drawing to a 2d drawing or extracting indivigual sheets to a 2d format model. I have tried exploding the information on the sheets in order to get everything to export but that doesn"t work.
AutoCAD 2010 :: 0,0 Paperspace Versus Model Space
Aug 22, 2012Suddenly, this week, Paperspace no longer has a 0,0.
For decades I've inserted my Titleblocks in Paperspace at 0,0.
This week, it inserts it relative to 0,0 in Modelspace in one of the Viewports.
Which means the Titleblock is "Waaay Offf" to quote Rodney Dangerfield.
If I draw a line in Paperspace and start it at 0,0, again, it's the Modelspace 0,0 in a Viewport.
Was this an improvement that I didn't know of?Or did I accidentally change some setting?
AutoCAD 2010 :: Model Space Jumping During A Command
Jan 9, 2012We are running AutoCAD 2011 and 2011LT on Windows 7 with 12gb of ram and a NVIDIA Quadro 4000 video card.
The problem did not happen to often when we were on XP, but now, whenever we're in a command, the screen jumps as if snaps were turned on with 1/2" spacing. We've tried upgrading the drivers and graphics cards as well as installed all updates I could find. We make sure drawings are purged and audited and Layer manager IS NOT kept open.
AutoCAD 2010 :: VPLayer Settings To Model Space?
Feb 7, 2013Civil sent a sheet and reference file. I need to reference the civil file into my architectural model file. The civil sheet file has a viewport with most of layers and colors properties set the way I need them to appear in my architectural model floor plan. The civil view is using VPLAYER overrides properties. How can I get civil's viewport layer overrides set current in model space of thier file? I can reuse the file as my architectural backgound model file.
View 2 Replies View RelatedAutoCAD 2010 :: Ltscale In Model And Paper Space
Apr 24, 2013I've picked up someon elses drawings and for some reason in paperspace the ltscale is set to 10. i've tried changing the global scale factor to 1 in the linetype manager but it keeps changing back to 10 when i tab through the different sheets.
i normally have both my ltscale and psltscale set to 1 in paper space (and celtscale=1) and have a custom macro asigned to a button for my modelspace views ie 1.100,20,10 etc and a macro/button setting the ltscale back to 1 when returning to paperspace and this worked nicely.
why the global scale factor keeps reverting back to 10?
AutoCAD 2010 :: Can't Locate Drawings In Model Space
Jun 18, 2012I was working in model space and when I hit zoom extents, I lost all of my drawings in model space. They must be there because I can see them in layout, but I am not able to locate them in model. For some reason my cross hairs and the ability to draft have disappeared too. I am sure I must have hit a setting that needs to be changed back.
View 3 Replies View RelatedAutoCAD 2010 :: Viewport Hides Model Space Dimensions?
Feb 10, 2012i am haveing trouble with a viewport that is hiding everything that crosses the rectangular border. The viewport is acting just like a wipeout would. I got this drawing from a client and I can't figure out what is wrong with it. I checked to see if there was actually a frame with the viewport but when I select the viewport it only reads as one object.
View 6 Replies View RelatedAutoCAD 2010 :: Text Line Width In Model Space
Dec 4, 2012I need to change the text line width in model space, not the overall text width or the text line width/weight in paper space. Our mold maker wants to measure that on screen and he wants to set the text line width to 0.060”, while the overall text width fixed.
For example, the text “REMOVE FROM BOAT” is 3” wide total from first letter R to last letter T and height 0.4”. That is easy to do. The hard part is that he wants the line in each letter to be 0.060” (1.5mm) wide. I practiced the true type text which is measurable in model space, but that is fixed with for a certain font with a certain size. I can change from one font to the other and get different thickness but cannot change the width freely to 1.5mm as requested.
AutoCAD 2010 :: Model Space Text Appears Bold
Sep 13, 2010when working in my current drawing (Model Space), i create a new mtext item, and it shows in bold, i am aware of the common problem of the text items having a z height other than 0.00 causing this, but i have checked, and reset the z height, have also tried the flatten command, and even tried explode and then flatten/z height.
View 9 Replies View RelatedAutoCAD 2010 :: Command To Switch From Model Space To Paperspace?
Feb 22, 2012I'm looking for a lisp that will allow me to switch from Model Space to Paper Space and vice versa.Looking for another option other then the "Quick View Layout/Drawings".
View 6 Replies View RelatedAutoCAD 2010 :: Slow When Switching Model Space Viewports?
Jan 30, 2013I have a delay when switching back and forth between model space viewports,
View 7 Replies View RelatedAutoCAD 2010 :: Importing Model Space From Cyclone Into Cloudworx
Jun 15, 2012I am trying to import a Model Space (point cloud) from Cyclone intoCloudworx. Currently I am able to click the "Import Model Space View" and then browse to find the file I want to import. It imports it successfully, but nothing appears on the screen. What are the steps necessary to make the point cloud visible? And is there a way to import several Model Space views at once so we can manipulate them independently in Cloudworx?
View 1 Replies View RelatedAutoCAD 2010 :: Finding Paper Space Tabs And Model Tab?
Aug 20, 2012I just changed jobs to a company that uses MEP2012. It seems as though it is not possible to revert to Acad classic with this version. So, I am trying to mimic classic as much as possible.
One of the challenges I have found is finding the paper space tabs and model tab? it used to be directly above the command line, is there a command to turn it on?
AutoCAD 2010 :: Some MText Disappeared From Model Space But Visible In Layout
Mar 15, 2012I have a big drawing and some Mtext from a text layer just disapeared from model space. If i switch to a Layout the text is visible in the layout view and I can select it in a floating viewport, but when I switch back to model again I do not see it.
I added new text in model where missing and now in the Layout I have duplicates, the old one and the new one.
If i try to copy/paste the missing text from a previous version of the drawing, the text just doesn't paste, is not visible.
AutoCAD 2010 :: When Insert Xref In Model Space - It Shows In Angle
Mar 28, 2012I have a bit issue with inserting xrefs in model space .Basically, when I insert the xref in model space, the xref shows in an angle.
View 1 Replies View RelatedAutoCAD 2010 :: Hide A Layer In Model Space But Show It On Paperspace Tab
Mar 15, 2012I'm looking for a way to hide a layer in model space, but show it on ONLY my paperspace tab. Problem is, most of my work is in model space (different aspect of this drawing), and although I could pull the objects through to the paperspace tab, it just wouldn't be the way I feel it should be (3d objects should stay in model space imo). However, for the most part I don't need to see it in model space (except for checking 3d elevations of line segments), the finish product is a printed 2d top view.
View 5 Replies View Related