Un-purgable blocks? Is there some way to designate a block within a drawing so that it canNOT be purged even if it is not being used at the moment?
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
I'm using Architecture 2011, but the problem is pretty generic.
I am working with a very complex vendor drawing and using it as an xref to my working drawing. I need to be able to freeze parts of the xref and change colors (for plotting purposes) of other parts. Under ideal circumstance this would require simple layer manipulation.
My problem is that a large percentage of the vendor drawing is made up of blocks. There are nearly 1000 different blocks. Most of these blocks were created using layers other than 0 - quite often more than one layer is used. Sometimes the block is inserted on a layer that was used in it's creation, sometimes not. The only way I can omit one of these blocks from my drawing is to figure out what layer was used in it's creation and freeze that layer. You can see how this could be a pretty tedious process.
My limited CAD knowledge only gives me: edit all 1000 blocks, changing them to layer 0
I have a lighting block I need to insert into a drawing. Who ever drew the block did so upside down (so the top is really the bottom). I can't, for the life of me, figure out how to "rotate" it so that the top is correct. When I rotate the block, it simply keeps the top the top. When I copy and paste it, it stays the same as well. I tried inserting it into a new drawing.
View 4 Replies View RelatedI am trying to add a set of attribute data to a block that already exists within a drawing.
View 1 Replies View RelatedI have a drawing where I have placed all of my natural gas piping. I have all of the annotative blocks set to 3/32"=1'-0" and 1/32"=1'-0" scales. They are both correctly displayed in this drawing.
When I xref this drawing into another about half of the 1/32" blocks show up correctly. The other half are shifted to the right off of the plan. All of the 3/32" blocks show up correctly.
When pasting a block from a drawing to a second drawing using the clipboard method the block pasted in with components of block in different area of drawing but still linked together. This even happened in the same drawing.
View 9 Replies View RelatedI am trying to insert a block in the drawing sheet, that varies in size dynamically. Is there anyway for changing the size of the block.
View 9 Replies View RelatedMy boss gave me a drawing to make some changes on a particular block; however, every time I try to insert the block, it always insert the block in Paper Space even though I'm in Model Space.
Is there any way to change that insertion point? I want to insert the block in Model not in PS...
I am looking for some code or something which can change the title block revisions from "01" to "02" in multiple drawings.
The title block revision block is set in attributes.
Is it possible to create a 'drawing scale' defined attribute inside my title block when brought into paper space? I tried setting it up using 'plotscale' fieldname with various formats and it keeps coming in as 1" = 1' or 1:1 rather than 1" = 20' because that's what my plot scale is inside paper space but my drawing scale is 20 scale. If I bring the title block in model space, it adjusts, but I don't plot from model space. Surely there's a way to make this automated inside paper space.
Also, I just setup a 'Date' attribute inside my title block today. What's the difference between Date, Saved Date and Plot Date? Will 'Date' update if its in a drawing and opened up a month from now and saved or do i need to take 'Date' out and replace with 'Saved Date' or Plot Date'?.
I am attempting to attach a title block into a layout. This is my process:
1. Go to Building1 drawing, and go to layout. Without any viewports created, I attach a dwg file named titleblock1.
2. When I specifiy the location and scale, I cannot find the attached drawing.
why can't I attach files larger than 1.5 KB? I can't attach anything useful!
Having problems when copy/cut and paste. When pasting or inserting a block into a drawing the subject disappears.
View 4 Replies View RelatedI have a basic floor plan in AutoCAD 2012 that has blocks in specific locations which contain personel data....name, phone, computer tag, desk key numbers, etc. I extracted the data to an Excel spreadsheet and I thought set up a "data link". But I don't know how to make the data update.
My problem...moves of staff, phone, computers are often made, but no one lets me know about it until they want a new floor plan printed and the computer and key tags get so messed up from the moves that it can take me hours to fix.
My goal is to be able to have our secretarial staff update the spreadsheet and in turn update the blocks in my AutoCAD drawing when it is opened and/or "updated".
Working in AutoCAD LT 2010.
Drawing format 2007 or 2010
bedit, OK if you regenall after
refedit, Ok if you regenall ofter
design Center - display order goes out the window. The inserted block is redefined but the rest of the drawing loses all its display order. sortents (127, 33, 51, etc) and displayorderctl does nothing, either before or after the block is redefined. hatches and blocks just jump to the front (display order shows as order of drawn not order as moved to) Regenall does nothing.
absolute nightmare with display order managed elevations (solid hatch, baconies, windows, multple buildings, all overlaying!!)
Is it possible to setup a block so that an attribute position remaines fixed (absolute to drawing) when moving the block?
I've been playing around with creating a Coordinate Block by following these instructions: [URL] ........
What I would like is to be able to set the position of the Coordinate Label and Coordinate Object independently, so that if I move one in the drawing, it doesn't move the other. I've looked into Dynamic Blocks, and the "Lock Position" parameter. I can move the attribute independently, but still everytime I move the block, the attribute moves too.
Our company uses a custom Sheet/Coordinate system to follow flyoffs across a drawing, and I'm trying to learn how to automate the process. It's completely manually right now, so any changes to a drawing creates a lot of work renumbering these flyoffs.
My drawing- block is a little bit complicated, it contains few actions and parameters and everytime i open block editor to add, or to modify some action I can't see my drawing because actions grips and parameters grips obscure my drawing. I tried to refresh layout but it doesn't work.
please take a look on attached jpg.
At our office We use alignments to designate the pipeline. At our pi.'s or points of intersection We have the autocrat _wipeout circle. It works fine in c3d 2011, but for some reason when We take them into c3d 2012 the wipeout circle goes under the red line instead of above. We have checked through the properties and can not find a display order. Otherwise We are currently inserting a wipeout circle and having to place on At every intersection.
View 2 Replies View RelatedIs it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.
I have created a dynamic block with a stretch, flip and rotate. Everything works great in its file. When I insert it in another file, the grips move but the block does not change.
AutoCAD 2014
We have a title block and border which is used in MS. If this is referenced using AMTITLE then it acts as expected. We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing. ACAD does now not see them as a Title block or border but as blocks. We have a process to bring DWG's into SAP and this will check for a title block and border.
The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again. Is there a way to convert the blocks back to how they should be?
AutoCADM 2011 SP2
XP 32-Bit SP3
I have a block (room info) that has five line os text with attributes that display grips which allow them to be moved in whatever drawing I put them in. Within that block there is a little polyline that is the square with a dash through it to represent sq. ft. that I made into a seperate block ( sq ft tick). The room info block part of it works great in all my drawings, but the darn sq ft tick block within the room info block won't budge! I have tried giving it a seperate insertion point and giving that block its own attribute, but no luck.
Is there any way to have a block within a block that has the same ability to move around as the other elements?
I am trying to use the tool for drawing a filled-in circle with a colored border to add a series of circles to a map for use in identifying specific stops on a tour. I cannot, to save my life, figure out how to designate the size of the circles. Instead, the only thing I can figure out to do is use my mouse to click, hold, and drag until the pixel dimensions on the screen show exactly the size I am aiming for.
The problem is that I am trying to hit exactly 30x30 pixels. Either my hand is not steady enough or the mouse is too sensitive, but it is taking forever to try to hit precisely the right size. Is there any way to simply click the point where I would normally begin dragging to draw the circle and then just type in the dimensions on my keyboard?
I have a complex shape will lots of gaps, nad in those gaps is a layer that is colored orange. Is there a way to designate that all spaces with orange should appear transparent when saving as png?
I cannot just delete the orange because it is convering things from other layers beneath which I cannot simply delete.
Eventually after I copy and paste with the clipboard enough times within one drawing, the ability goes away and I can no longer copy and past one item from one drawing to a separate drawing. I need to use the clipboard function because that is the only way of getting an item from one drawing to another.
I have download a clear clipboard function but it doesn't work. Closing CAD and restarting does not reinstate the function.
My Autocad has started a new behavior. When (in Win7) I double-click on a drawing file in Windows Explorer, Autocad opens the drawing file and also starts a new drawing, all in the same session of Autocad. Is there some system variable or Windows variable that controls this?
View 1 Replies View RelatedI`ve made a correspondence analysis in excel and want to get a scatter plot as .eps-file. I`ve imported the X and Y values in Illustrator and created a scatter plot. Now I would like to represent the numbers of data points (like in the illustration below).
View 1 Replies View RelatedHow can I designate a specific album in iPhoto 11 to import into Elements 10 rather than the default of "the last 6 months?"
View 1 Replies View RelatedI realize it may be a Civil3D question. When I change my drawing scale in the "Drawing Settings" dialog box to 1"=40', for example. The Annotative scale in the Properties Palette changes to 1"=40'_XREF.
View 2 Replies View RelatedI'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
2. I wrote this in the heading of the form's
- Imports Autodesk.AutoCAD.Interop
-Imports Autodesk.AutoCAD.Interop.Common
3. In the event Click of the Button1 I put this:
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application
AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application
Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document
acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2
'Draw a line
Dim PT1(2) As Double
[code].....
Is it possible to designate a full bleed print or a smaller bottom margin than .56in in the print module. How?
View 4 Replies View RelatedDrawing A has a grid system Xref-ed into it. It also has a block reference in it, repeated in various places throughout the drawing.
I Xref-ed the grid into the block to check something, and now I can't get it out. This means that the grid now repeats all over Drawing A as well and is generally being a nuisance.
If I try to unload the Xref within the block, it unloads it in Drawing A too. If I try to detach it from the block, it returns this message: Xref [Xref name] has multiple references. Not detached. If I try to detach the Xred from Drawing A, it returns the same message.
How do I unload the same Xref that occurs in a block in a drawing, and in the drawing itself, independently of each other?