AutoCAD 2010 :: Temporary Driver Failures
May 10, 2012I have system with the Intel HD Grahics 2000/3000 chip set. When I select certain tools, I get driver failure followed by instant recovery. Happens ONLY with Autocad 2012.
View 1 Replies
ADVERTISEMENT
AutoCAD 2010 :: How To Apply Temporary Override Key Tweaks
Nov 27, 2012I'm trying to override the F9 key with an AutoLISP subroutine invocation. However, though I have redefined the Temporary Override Key (associated with the F9 key) in the CUI editor, the F9 key nevertheless still triggers the default Toggle Snap Mode behavior. So it's not accepting the redefinition even though the new definition persists between AutoCAD sessions.
how to get the redefinition to take?
AutoCAD 2010 :: Missing Display Driver?
Nov 6, 2012I've been working with a firm for 6 weeks now, and had no major AutoCAD problems for the first 5 weeks. We're running AutoCAD 2010 on my machine, and it crashes quite often when I close drawings, which is quite annoying. But last week after opening a series of drawings to print some stuff for the boss, and CAD crashing after every 1 or 2 prints, I got the message:
A display driver file (.hdi) is missing or has been corrupted. The program will be closed.
This problem may be caused by missing .hdi files in the following location:
C:program filesAutoCAD Architecture 2012drv
I ran a repair, then did a reinstall, and when neither of those worked I just uninstalled and reinstalled the whole program. I still got the error message, but I had opened AutoCAD Architecture and was using that instead for a bit and saw Autodesk do an update in the background. So I booted up AutoCAD 2010 and it was working again so I guess it fixed the problem. I used it for a few more days then yesterday I had to open and print another series of drawings for the boss and it crashed again after every one, as usual, and when I sat back down and tried to open up a drawing to work on it I got the same error message again. Frustrated and angry, I switched over to AutoCAD Architecture and imported my Classic setting and used that for the next day. But this morning I had to open and print 3 more drawings for the boss and Architecture crashed after every one, then it started giving me the same error that regular AutoCAD has been giving me about the missing .hdi file. I copied the drv folder from a co-worker's computer and replaced mine with the working one, but neither version of AutoCAD is working again.
So I ask, what do I do now? I can't keep uninstalling and reinstalling AutoCAD every week because of these crashes and missing .hdi files. I need a real fix, something to fix the constant crashes and missing files. Sometimes I have to open multiple drawings to pull blocks or whatever from an older drawing, and I can't risk CAD crashing after I close these drawings and me possibly losing some work on the file I am actually working on at the time. this is making me way less productive at work spending all this time trying to get AutoCAD to work.
AutoCAD 2010 :: DWG > PDF Printer Driver Saves Layers?
Nov 24, 2010Is there any way to prevent the DWG > PDF printer driver from exporting out the layers in the drawing. I want to issue PDF's to different people but I don't want them to accidently freeze or turn off layers.
View 4 Replies View RelatedAutoCAD 2010 :: Trueview - Batch PDFs Corrupted Driver
Mar 21, 2012What Acad2010 or Trueview 2012 uses to create it's bacth PDF's? We got a new plotter last week and it seems to have corrupted that driver somehow. We are no longer able to create batch PDF in either Acad or Trueview. We using both Win XP and Win 7 machines. I don't know if the plotter had anything to do with this problem it just seem that this happend the same time as we installed the plotter. I can use a 3rd party PDF maker to make individual PDF but this takes time, the batch PDF is much more useful for me. I'm hoping I can get the generic PDF driver that autocad uses and reinstall that, but I don't know what it is or where I can find it.
View 6 Replies View RelatedAutoCAD Inventor :: Tube And Pipe Update Failures
Apr 4, 2012I am using IV 2012 Pro and modeling a plant that has misc. equipment all interconnected by piping runs. I created the equipment models and several specific pipe styles as well as authored a few custom valves, etc. The customer has redesigned the equipment layout three times in the last two months. Each time they do, some of the pipe runs follow their associated equipment correctly and some do not. It's been frustrating to say the least. Whenever the run has valves (be they custom or content center) it seems that the valves hold their position in space and pipe tries to follow the equipment. I end up with a mess of **** each time and end up deleting the entire tube and pipe runs to start over.
I have constrained the equipment by groups to minimize the back and forth runs. Basically I can move a group of equipment by changing one of a set of master constraints. I have three groups. I was hoping that this would keep the pipe runs inside the group to remain unchanged as their inter-relation inside the group never changes. This is not what happens. The equipment moves, some of the pipes update correctly, some hold their position in space, and some leave valves or fittings behind and also try to maintain connections to the equipment.
Lightroom :: Epson 3800 Driver Options To Disable / Enable Driver Rendering Disabled
Nov 18, 2013Trying to print from LR 5.3 RC using .icc profile in printer settings in Epson Pro 3800 driver the Color Settings and Color drop downs are disabled???? In other applications these options are enabled and selectable.
View 3 Replies View RelatedPaint Shop Pro :: X5 - Retouch Of Photos With Color Disperse Failures?
Jun 24, 2013I have hundreds of paper based photos, damaged in color disperse caused by a flood in our basement. I cleaned and dried them all, and I made a digital copy with my mobile phone camera. I'm using PSP X5 to resize the photos and I used "intelligent correction" from PSP. Result of copy is now better than the original, but the color disperse is still there, if there is a way to reduce this damage with PSP
View 6 Replies View RelatedAutoCAD .NET :: Temporary Document And Database
Oct 18, 2012I have a preview control on a window that I want to display temporary custom entities that the user can build before adding to the current working document. Is there a way to create a temporary document and database that I can show in my preview control? The Preview Control was created with the guidance of the BlockView.net sample.
What I mean by temporary, is a document / database that cannot be displayed or edited in the editor window.
AutoCad :: Temporary Measurement Marks
Aug 6, 2011I was wondering if there is any way to temporarily mark measurements that I have made with the Measure function so I can go back and start a line at that point. Each time I use Measure, the information disappears when I go to another function.
View 5 Replies View RelatedAutoCAD LT :: Modify Temporary Override Keys
Jan 15, 2008I recently acquired AutoCAD 2007 LT and I'm trying to modify the temporary override keys the way I like them, and I can not get them to modify, or to work in their current settings.
I found the entry for the topic 'To modify a shortcut key.' It has 8 steps. I got through the first five, but the sixth I can not get to work as they describe it.
When I go to enter the new temporary override key, nothing appears in the entry window. For example, I am trying to set Endpoint Snap to CTRL-E. (It is currently SHIFT-E.) This is how I had it in 2002 and it shouldn't be a problem. But when I type it in, nothing appears. In fact, no matter what I type, nothing appears unless I press 'shift' first.
I also can't get them to actually work. If I'm in the Line command, and I turn off the running Osnap, and I press Shift-E, it does not actually create an endpoint snap for me, it just types a capital E in the command line, which does nothing for me.
AutoCAD 2013 :: DIST Temporary Line With Thickness
Apr 5, 2012DIST temporary line with thickness - bug
To replicate:
Open any drawing > go to Layout.
Turn ON Lineweight.
Enter DIST command. Pick first point. Do not pick second point.
Instead do wheel mouse zoom in. => the temporary line has thickness. It should not.
AutoCad :: Temporary Track Point Versus Tracking
Aug 6, 2008I’ve been using Autocad LT since 1994 and the Tracking command has always worked the same, now in the newest version (2009) when I Shift + Right Click I only have “Temporary Track Point” on the menu and it works differently then the old Tracking in LT 2002.
If I want to place a Point at a specific area inside a rectangle I would normally select Point then invoke Tracking then select the bottom left corner of the rectangle and move the cursor over to the Right and enter a distance such as 2.1 Enter, then move my cursor up and enter another distance 2.5 Enter, Enter. That would place the point at 2.1,2.5 relative to the lower left corner of the rectangle. I can no longer do this because as soon as I hit Enter after the first distance it places the point there.
AutoCAD Civil 3D :: Temporary File (As XREF) Slows Drawing
May 9, 2013I'm working on a rather large subdivision (not uncommon, certainly used to a longer-than-normal load time) but have found one of our XREF files to be bringing drawing loads to a screeching halt. We have XLOADCTL set to 2, which explains the creation of the temporary file.
I have previously gone into the file and reset the scale list, which speed things up by about 50%, but today it appears to be doing the same thing.
Is there anything I can do to prevent this from becoming a more serious problem? Can I add some sort of SCALELISTEDIT reset command to the acaddoc.lsp file?
Civil 3D 2014
Windows 7 Professional
Intel Xeon E31270 @ 3.4 GHz
8 GB, 64-bit
AutoCad 2D :: Temporary Tracking Line On Distance Command Has Disappeared?
Nov 26, 2013The temporary tracking line on the distance command has disappeared.
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Object Enabler - Any Way To Temporary Disable It
Feb 28, 2013I have an Object Enabler question... is there anyway to temporily disable them - but without Programs And Features > Uninstall?
I know that most enablers add an entry in Appload. What about a button that unloads the enabler if its name can be determined?
AutoCAD LT :: Universal Plotter Driver?
May 11, 2013I have recently installed a computer system and the Plotter the client is using is a Canon W7200; Canon have refused to release any updated drivers and there were never any previous 64bit drivers that were created for this piece of hardware.
Are there any Universal Plotting Drivers? or a Generic one that can be used with all Canon Plotters?
AutoCAD 2013 :: Printing To PDF In Different Driver
Apr 17, 2013Two choices for print pdf files: DWG to PDF.pcs or Adobe PDF.pc3.
What is the difference other than the first one can create layer info in the printed files.
AutoCAD LT :: Heidi Driver Not Loading
Jul 7, 2011I have started getting the message 'The configured Heidi driver was not loaded. Switching to the default software driver.'
This seems to happen when opening a drawing but sometimes at random.
VideoStudio :: Deleting Temporary Files
Aug 6, 2011I have VideoStudio 11 running under an XP Virtual PC.
I'm sure that there is a command to delete temporary files but I can't for the life of me remember how to access it.
Alternatively, would it be easier to go straight to the VideoStudio working folder. I've just had a look there and was staggered to find no less than 24GB of various files in the CvtedTitle folder.
Photoshop :: Folder Specified For Temporary Files Is Not Available
Feb 13, 2008Whenever I start PS CS, I get a "The Folder Specified for Temporary Files is not Available" error message.
View 6 Replies View RelatedPhotoshop :: Where Are The Temporary Scratch Files...
Dec 1, 2008I was in the middle of croping a document and I realized I had inches instead of pixels. It looks like it was writing a file 600 in by 600 in 300 dpi. I had to hard boot my pc. After that I lost 20 gigs from my hard drive. What type of file photoshop writes?
View 3 Replies View RelatedRevit :: Clashing Temporary Object?
Jan 18, 2013I need to mark an area that will be filled with equipment in the future. I ned this area to come up in an interference check.
I have created a mass to represent the area but you can't clash a mass. What object I could use to represent the area but can be clashed
Revit :: Temporary Dimensions Do Not Show?
Nov 5, 2013I am using Revit 2014. My temporary dimensions do not show. When they do, they only show on one side. I have gone to Manage>Additional Settings>Temporary Dimensions, and tried the different options. It is making it very difficult to place things right now. Is there an all on button I can push? I have also tried closing and re-opening the file, turning off the computer, etc. They were available for use yesterday morning and have not worked since.
View 3 Replies View RelatedLightroom :: Temporary Invisible Folders
Dec 31, 2012On my iMac's finder there are many temporary subfolders in my LR folder that do not show up in LR. They are named "Temporary Folder" followed by a long string of alphanumeric characters. Presumably they were created by LR as part of its operations (importing?). Can I erase these or will that disturb the Catalog? If they will, how can I remove them or should I just leave them alone? They are really piling up.
View 4 Replies View RelatedAutoCAD Inventor :: Display Driver Not Responding
Sep 7, 2012We just installed the Autodesk Package. AutoCAD works fine, Revit seems to work, but we are having the display drive not responding, when we try to start a sketch in Revit.
ATI Radeon HD 3740 graphics card.
Windows 7 - 32 bit
AutoCAD Print / Plot :: How To Update Dwg To Pdf Driver
Jun 3, 2011How to update dwg to pdf driver? Running Autocad 2011.
View 2 Replies View RelatedAutoCAD LT :: Display Driver Crashes With 2012
Jul 26, 2011I have a brand new HP Probook 4530s with the correct requirements to run LT 2012 as well as a certified and tested graphics card and latest drivers, but as soon as I try using offset or trim functions while drawing, my screen goes blank for about 4 seconds and an error message below tells me my Display Driver has stopped working and has recovered.
No matter the screen resolution settings, it still does the same, also the laptop is still cool, so can't be a heat issue.
AutoCAD 2013 :: Display Driver Shutdown
May 27, 2012I've recently installed ACad13 and it shuts down on me at least once, sometimes twice a day - A message appears that says "Display driver fail to display". I have also installed 13 onto a brand new computer using Windows 7 (64 bit). Or is it a problem relating to the new pc - everything else seems to work ok on the computer
View 1 Replies View RelatedAutoCAD LT :: Display Driver Is Missing Or Corrupt (HDI)
Apr 10, 2013I just got a new laptop, it's totally clean.
Installed F-secure and made exceptions rules for all Autodesk related stuff
Installed Office-package.
Downloaded and installed Autocad LT 2014, no problems detected but when I start I get this error message.
I got less then 2 hours to fix this and a few other things I havn't gotten to yet and I need this laptop up and running tomorrow for a seminar.
"A display driver file (.HDI) is missing or has been corrupted. The program will be closed."
This problem may be caused by missing .hdi files in the following location: "Autodesk>Autocad LT 2014>Drv>
I can't find the specified file under the folder so I'm guessing it is missing, any quick fixes for this?
AutoCad LT 2014
Paint Shop Pro :: Temporary Storage Of Items
Apr 4, 2013When I'm working on a project, I sometimes create bits of artwork that I may or may not want to use in the piece. However, when I move the items off the canvas, they pretty much disappear. Is there any way to store items "off canvas" and have them visible for quick selection?
One option, I guess, is to make the whole Edit preview area the canvas and only crop the item to final size when I'm done, but that seems wonky.
[URL]....
