AutoCAD 2010 :: Renumber Sheet Set
Apr 9, 2013Is there a way to renumber an entire sheet set without going to each sheet and hitting next on the rename / number option?
View 6 Replies
ADVERTISEMENT
AutoCAD 2010 :: How To Disable (Rename & Renumber Sheet) Dialogue Box
Sep 19, 2012Is there a system variable that disable the "Rename and Renumber Sheet" dialogue box from appearing when double clicking on layout tab of current drawing which is part of sheet set?
I used to be able to just double click on a layout tab and change it. This dialogue box can't seem to edit it if the drawing is open. We use the layout the tab as current revision of drawing.
I know I accidentally click on yes before when it asked me if I want to use the dialogue box to edit layout tabs but can't seem to find anything on how to disable it.
AutoCAD Civil 3D :: Renumber Sheet Set Through Sub Sets?
Oct 8, 2013way to renumber an entire sheet set without having to stop at each subset? Currently, I right click on a sheet and select "rename & renumber". The Rename and Renumber dialog box pops up and I type "1" then click on "next", type "2", "next", and so on. This continues until the end of the subset, the stops. Then I have to right click on a sheet in the next subset and start over.
I want to renumber the whole plan set without stopping at each subset. Obviously, I can get rid of the subsets, but that isn't my question. I want to keep the subsets and have the ability to renumber the whole set.
AutoCAD Civil 3D :: Renumber Sheets In Sheet Set Manager?
Jan 2, 2013is there a way to renumber sheets in the sheet set manager? i've got over 100 sheets and i need to insert some new sheets in the middle. there wasn't a way in 2009 but i was hoping for something in 2012. it seems like something that would be included by now.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
AutoCAD Visual LISP / AutoLISP :: Sheet Setup - Rename / Renumber Additional Field
Dec 27, 2013How to add the sheet description field into the rename & renumber window? I ask this because during the sheet set-up process we use the sheet description often, and I would like to go from sheet to sheet without having to right click and edit every sheet.
Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5
AutoCAD 2010 :: How To Automatically Renumber Sheets If Resorting Occurs
Mar 28, 2012How to automatically renumber the sheets if re-sorting occurs?
I’m not sure if there is a way to automatically renumber the sheets in sequential order in case of re-sorting the sheets. This might occur very often during the work!
For example, in the screenshot below, I wanted to re-numbering the sheets AUTOMATICALLY such that the numbers of the sheets starts from 1 to 6.
Then how to automatically re-number the sheets in sequential order automatically?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2010 :: Include Custom Sheet Properties In Sheet List Table?
Jan 3, 2013Is there a way to include custom sheet properties in the sheet list table?
AutoCAD Civil 3D 2012 (Primary),
Dell Percision T3500: MS Windows 7 64-bit SP1;
Intel Xeon CPU W3505 @ 2.53GHz, 12.00 GB RAM, NVIDIA Quadro 600
AutoCAD 2010 :: Unable To Open Sheet List In Sheet Set Manager
Sep 6, 2012I am not able to open Sheet list in Sheet Set Manager.......
View 3 Replies View RelatedAutoCAD 2010 :: Link Text On One Sheet With Another Sheet?
Apr 2, 2013I have over a 100pg plan set and have changed page numbers and added more drawings and deleted a few. so now we have to go through the entire Table of Contents and drawings and renumber everything. Is there a way to link the fields in the Table of Contents with the page numbers on the drawings?
View 2 Replies View RelatedAutoCAD Inventor :: Renumber Balloons For ILogic?
Sep 1, 2011I want to add the Balloon Renumbering function to our templates using iLogic, but when I run it I get an error message saying: "The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))". I have narrowed it down and think it has to do with the following line: partInfo(i - 1).Number = drawBOMRow.Item(itemColumn).Value. When I remove that line I don't get an error message, but every balloon is set to item no 0. The function I want to achieve with the code is to renumber separate part files against the assembly BOM.
Public Structure udtPartInfo Public udNumber As Integer Public ReferencedFile As String End Structure Sub Main() Dim drawDoc As DrawingDocument drawDoc = ThisApplication.ActiveDocument Dim baseSheet As Sheet baseSheet = drawDoc.Sheets.Item(1) Dim valSet As BalloonValueSet
[code]....
AutoCAD Civil 3D :: Renumber Points In Point Group
May 25, 2013Is there a way to renumber all the points in a point group? Right now I am doing each point individually but I have many points and it would be wonderful to learn how to do that automatically.
View 4 Replies View RelatedAutoCAD Inventor :: ILogic To Sort BOM - Renumber Items As Sorted
Jun 13, 2011I want to use iLogic to:
1.Sort an assembly BOM by Part Number.
2. Renumber Items in the BOM as sorted.
3. Sort a drawing Parts list by item number.
The background to my problem is that i have an assembly which is working beautifully turning components on and off (suppressing/activating in LOD reps) as defined by iLogic rules (iLogic is awesome). The problem is whenever a part is turned on/activated again, it shows up at the bottom of the BOM and Parts list out of order (would be nice if parts went back in the list where they came from).
AutoCAD Inventor :: ILogic - Renumber Count Of Pattern Elements?
Jan 18, 2013Since I used Autodesk Inventor 2013 last year, I had an question about numbering en renumbering the count of elements in patterns.
I had an assembly with iLogic for placing and replacing elements, suppressing parts and edit dimensions of parts in 1 assembly. Sometimes, 1 suppressed pattern must be un-suppressed. Before doing this, I would like to set the pattern count and distances between pattern elements in the pattern. How can I do it by using iLogic?
AutoCAD 2010 :: Sheet Set Manager
Sep 17, 2012When I try to select the folder where my drawings are located SSM is only showing me 2 of the 3 drawings located in that folder. I have not had any problems with other folders. I even tried moving the drawing file to a different folder, but SSM still does not add it to the sheet set list. I have tried re-booting and nothing.
View 2 Replies View RelatedAutoCAD 2010 :: Naming PDF With The Sheet Title
Oct 3, 2012I need to name about 200 PDFs with the sheet title of that dwg, without having to manually naming each one. Niether the file name nor the layout tab have the current sheet title. So how can i either rename the layout tab with the sheet title or name the PDF with the sheet title??
This is in AutoCAD P&ID but a solution in regular CAD is useful.
Script?
Batch process?
Import/Export?
AutoCAD 2010 :: Viewports Have Disappeared On One Sheet
Feb 26, 2013I have a layer VPORTS. I create viewports in this layer
On a 10 sheet drawing. viewports are visible and selectable on 9 sheets. Only one sheet they have dissapeared
I cannot select or edit vports on this one sheet
I have rebooted.. turned on and thawed all layers.. can see the viewports on sheets 1 thru 9 and edit them but not on sheet 10
AutoCAD 2010 :: Sheet Set Manager Locking
Nov 24, 2011I have an issue with Sheet Set Manager Locking the .dst file to one user, others can only open the file read only.
I am working on a network that uses Linux.
I have been using sheetset manager for several years and think its great but this causes a problem on large projects that need to have multiple users.
The below is an interesting link that i have recently become aware of but it doesnt say whether this fixed the issue or not.
[URL] ....
I have this problem logged with Autodesk but I have not got anything definitive.
AutoCAD 2010 :: Multiple Sheet Sets
Oct 28, 2013Have created 3 sheet sets. Like to create a sheet set with all 3 and still keep the original 3 sheet sets.
View 2 Replies View RelatedAutoCAD 2010 :: Sheet Set Not Saving Settings
Nov 2, 2012I am having an issue with my Sheet Sets keeping the settings I have entered after closing them out.
For example, I create a new Sheet Set (from Existing Drawings) add my layouts to it, organize them, then I right-click on the Sheet Set name and select Publish > Sheet Set Publish Options
In the dialogue box that opens I change four things:
1. Location: I point it to the network location where I want the DWFs stored.
2. File Format: change from DWFx to DWF (this is due to a limitation with our printing equipment)
3. Type: changed to Single-sheet file
4. Merge Control: changed to Lines Merge
It seems to maintain all of these setting until I close the sheet set out (change drawings, close C3D, etc.) Then when I reopen the Sheet Set later, it will revert the File Format back to DWFx and the Merge Control back to Lines Overwrite.
The reply given did not answer the issue but was mistaken for use with the plot dialogue box, which this is not about. The issue we are having is the sam as above with the "lines merge" ALWAYS reverts back to "lines overwrite" after the sheet set is closed and re-opened. I have seen a thread suggesting that If the PC3 files are read only this may be the problem, but as a cad manager in even the smallest of firms, having the pc3 files read only is just about a must to keep from accidental changes from occuring. Is this the reason? I dont see what conection the pc3 files would have with the settings in the sheet set manager. (all of our pc3 plotter setting are set to "lines merge" in each of the printer settings as well) so, where and why it keeps reverting back to "lines overwrite".
AutoCAD 2010 :: Sheet Set Manager And Templates
Apr 9, 2013I have set up a title block template I plan to use for ALL of my drawings.
I fallowed this website and PDF file at bottom: [URL]......
Great resource and very good explanation step by step which was what I was looking for; the problem I'm having is all his files are set up specifically for one project and I'm having difficulty setting it up for me.
I have everything finished but when I open my project .dwg file and SSM then new SSM file from template and customize the options everything looks fine however when I go to open a new sheet; yes it does open the template .dwt file however it completely open the whole .dwg file of the template so my viewport is the template viewport not my project .dwg file......
How do I get SSM to open new layout/paper spaces with the title block template but the viewport of my current project .dwg file.
AutoCAD 2010 :: 3D Spirals - How To Generate Cut Sheet
Jul 18, 2013I drew a 3d spiral, and now i need to create a cut-sheet in sections (half or quarter) so I can sent to my shop for fabrication. Please see attached photos.
I want to be able to provide a cut sheet template so i can print it out and they can trace it on the sheet metal, cut however many sections required, and weld it together to create the spiral. My concern is that the top view dimensions is not an accurate dimension when the piece is bent 8 inches from the start of the spiral.
Also, my next issue would be the side wall of the spiral, and how to properly create a cut sheet on the given dimensions.
I also tried to do this in Autodesk Inventor, using the sheet metal tool, flatten command, and I was unable to flaten the object.
AutoCAD 2010 :: Custom Sheet Set Properties
Sep 6, 2012It took me a long time & effort to add all 190 custom sheet set properties (Our Frame/template is complex). When i found out that I could not re-order the sheet set custom properties I was really pleased.
My problem;
I'm trying to add a FIELD with some of the sheet set custom properties. Why are the field not seing ANY of the 190 properties I added to my sheet set? see picture
I really love all of thoses fancy new feature Autodesk add year after year, I mean, you know, NURBS modeling & stuff... Trully great work Autodesk!
AutoCAD 2010 :: Update New Layout As A Sheet
Apr 12, 2013How can I update automatically my sheet set when I have created a new layout on my drawing? I mean it's awful to drag my new layout into my set for added as a new sheet! Is there an other way to save it and automatically have my new sheet?
View 2 Replies View RelatedAutoCAD 2010 :: Insert Excel Sheet
Jan 26, 2013What is the best way to Insert an Excel sheet into autocad?
View 4 Replies View RelatedAutoCAD 2010 :: Sheet Sets And Fields
May 18, 2012When we plot full packages for construction documents, we have to provide plot numbers for each sheet to the printing room. This is a completely different number then the sheet number itself....the plot number is basically the actual sheet number within the entire construction document. So if there's 245 sheets in the entire construction document and landscape sheets need to start at 188, is there a way to set up a field that knows how to number accordingly?
View 1 Replies View RelatedAutoCAD 2010 :: Custom Sheet Set Fields?
Feb 8, 2012I have a call out block that I am trying to link to my custom fields in my sheet set manager. When I put the block into paper space the fields fill in properly and if I make changes to the field in the SSM then the block updates properly. If I insert the block into model space the fields come in as if they are broken and you cannot reference the data in the SSM. The issue is that I don't want to do my annotation in paperspace, so is there a way to change the interaction between my block with the custom fields and the SSM.
View 6 Replies View RelatedAutoCAD 2010 :: Display Order Of Hatch On Sheet
Sep 9, 2012I have a solid hatch pattern I want to use on a sheet that would display under a Model Space View (MSV).
(Ideally, I would like the hatch to come from an xref set up in the .dwt for the sheet, but I won't push my luck.)
Unfortunately the solid hatch always remains above the MSV. Refer to image attached. I have tried the following :
- 'Draw Order' - 'Send to Back' of the hatch (including it's bounding box)
- "hatchtoback"
- "hpdraworder" = 1
- "sortents" = 0
AutoCAD 2010 :: Updating Notes And Legend On Every Sheet?
Jun 4, 2013Currently we have about 30 sheets where we xref the same construction note and legend. The client is asking us to remove notes that don't apply to each sheet. For example, sheet 1 will not need note 2, 6, 10, 11. Sheet 2 will not need 3, 5, 10, and 11, etc.
Same goes for the legend- they don't want to see something if it does not apply to the sheet.
Other than bringing in those notes and legend into each sheet and modifiying it, I can't think of another way to do this. Previously, if I needed to change the wording of note 4, I change it once and I'm done. If I need to change anything now, I will need to open up 20 sheets.
Also, they want to remove the note completely, and not just cover up the note with "Not used this sheet."
AutoCAD 2010 :: Sheet Title Block Template
Apr 23, 2012I already build sheet system ,and I found when I revise title block template,my sheet not update automatic,I must create new sheet,and double-click it to open it, then you can see update,who know why?
View 3 Replies View RelatedAutoCAD 2010 :: PDF Publish Stuck On Multi-sheet
Aug 16, 2012While publishing several drawings I am having problems creating Single Sheets, (a customer preference). Even though I have the Multi-sheet/Single-sheet setting set to "Single" Autocad still creates a multi-sheet PDF. I am using Autocad 2012.
View 3 Replies View RelatedAutoCAD Inventor :: 2010 - IDW Can't Move A Table To Another Sheet
Feb 18, 2010Can't drag it, copy it...anything. I guess you're just never supposed to want your table on some other sheet than the one you created it on.
Oh wait; I know...I could just swap everything *else* on the two sheets....