AutoCAD 2010 :: Lower The Quality Of Thumbnails?
Apr 13, 2012
We are having this problem with all 8 of our AutoCAD stations.
If we go to Tools / Options / Open and Save / Thumbnail Preview Settings, in the "Sheets and Views" panel, the "Performance-Accuracy Slider" is set all the way to the right, which the Information Panel lists as "Update thumbnails when saving drawing".
This makes our SAVEs very long.
We can slide it to the middle and our SAVEs become very quick.
But we have to remember to change it for EACH drawing we open.
I forgot on the last one and has been saving for half-an-hour so far.
Is there any way to keep the slider in the middle for each time we open?
View 2 Replies
ADVERTISEMENT
Dec 7, 2012
Somehow I ended up with duplicates in my library. Some could be compressed jpg versions that were emailed to people. Is there an easy way to determine which are the better quality versions so I can delete the others?
View 7 Replies
View Related
Sep 11, 2008
I want to re size a lot of images to a lower quality. Is there a way of doing this process without having to open each individual file time after time. All the images are different sizes. I just want to lower the size of the file for putting in a pdf catalogue.
View 5 Replies
View Related
Jan 19, 2013
Upgrading from PSE 10 to 11, I noticed that when I watch my images with the organizer in PSE 11 in full screen view mode (F11), while the images load faster, they are shown in a lower quality than in PSE 10 or any other version of PSE that I owned before. In PSE 11, after the initial viewing in full screen (in the "fit screen" mode), when I click with the mouse on an image to display the "100%" view, there is a delay and the program says "Loading...", after which the 100% view in the full screen mode appears. When I then click another time with the mouse on the image to get back to "fit screen" mode, I get an image of better quality than during the initial view!
So it seems like the program first gives a faster, but lower quality view of the image in full screen mode, and only after the user requests a 100% view, it actually loads the image with full detail, which is then preserved when going back to the "fit screen" view. This is a serious issue for me, because I also use PSE organizer to present my pictures to other people, and I don't want to show them some lower quality versions of my images, but the full quality ones, without having to first choose "100% view" and then go back to "fit screen".
How can I make the PSE 11 organizer give me a full-quality full screen image right away, as this used to be the case in PSE10 and before?
(I have both versions, PSE 11 and PSE 10, now on the same computer and tested this to confirm that the PSE 11 initial full screen view is of lower quality than the PSE 10 one. Also in PSE 10, there is practically no delay for displaying the "100%" view afterwards, indicating that the image was loaded with full detail right away.)
View 28 Replies
View Related
Sep 2, 2012
I need to display the nominal, upper and lower value. see attached picture.
View 4 Replies
View Related
Dec 2, 2013
Is there a reason that .DWG files do not update in Windows Explorer (Windows 7 Pro, SP1)?
I have "Save a thumbnail preview image" set to "Use view when drawing last saved". I also have Open with AutoCAD application set in Explorer. I have also re-booted the machine.
Have not had a problem before but all of a sudden, the thumbnail will not update, or it shows the AutoCAD "BIG RED A".
AutoCAD 2012 / Inventor 2012
View 9 Replies
View Related
May 24, 2012
we have created a large number of blocks out on our network and are continuously adding to them. A good way to provide a list or thumbnails of available blocks without having to create a drawing with all the blocks inserted to it. i just need to be able to communicate all available blocks to new hires, engineers, etc.
View 6 Replies
View Related
Sep 26, 2012
Publishing to PDF as single sheets for insertion into other documents or page managers (such as Indesign) works fine, apart from the fact that it makes crappy work of JPGs should any be embedded in the CAD file. Plotting individually using high quality PDF settings also works but it's difficult with large sets.
Therefore, I would like to publish a tab set to PDF using the plotter named in page setup. However, what this does, is it forces me to pick the file name and locaiton each time, rather than using the one specified in the publish dialog. Is there a way around this? That is, can I make the named plotter behave like the "DWG to PDF" one (that is, name the files automatically)?
If not, can I make the "DWG to PDF" one not compress JPGS?
As to why - I work in a mac environment and everyone draws in Illustrator. I use CAD and many times, for large projects, need this sort of page management. And every once in a while, I need to insert a rendering into a CAD document and then publish.
View 3 Replies
View Related
May 29, 2013
Why would psd thumbnails all of a sudden start not showing up as thumbnails, just as psd icons?
View 11 Replies
View Related
Jun 23, 2012
My problem is related with the quality of a image.
My question is how to maintain high quality (original quality) of a image after resizing it?
If i resize it with same ratio like:
2816x2112px to 1600x1200px (4:3)
2816x1584px to 1920x1080px (16:9)
Mainly i use scale image option in Gimp. But now i need to resize many images for my work so i tried David's Batch Processor to resize my images. After using it, i found there is some quality promble with the resized image.
Then i tried, the scale option with, use quality setting from original image and JPEG quality parameter is 95, in gimp but the problem is same. I did it with also with David's batch processor- JPEG quality parameter is 95.
Other thing is that, the original image 2816x2112px (4:3), size- 3.6 MB is displaying in image viewer with 47% and the resized image 1600x1200px (4:3). size- 1.2 MB is displaying in image viewer with 83%, So my questions are: How can i check the quality of a image after resizing it, means the image is exactly same as the original? Or Is David's Batch Processor maintain the original quality of the images after resizing?. I realy need to resize many images for my work.
View 2 Replies
View Related
Nov 30, 2008
I'm pretty new to photoshop, and I've started on a personal project. I want to basically take a video still from a music video and turn it into a poster. Sadly i can not find a good quality version of the video as it is older and not super famous, (kyuss-one inch man). So i found an online video that is better then youtube but not great, and i captured it through the vista snipping tool (screen capture).
Basically I want to take this low quality picture, and turn it into a good quality poster (not huge). What techniques and things must I do? I'll probably have to find a printer near here and require a specific dpi as well.
View 2 Replies
View Related
Oct 5, 2012
I am having problems printing from AC 2013. In one drawing I can print 42" x 380" with no problem but then I open a new drawing and try printing 42" x 315" AC doesn't send it to the printer. In the 42" x 315" drawing if I set my paper lower than 300" it prints fine.
View 3 Replies
View Related
Aug 24, 2011
When i bring a model in layout using chspace and ls it for its co-ordinates, it gives me upper bound and lower bound coordinates.What exactly is upper bound and lower bound coordinates?
View 0 Replies
View Related
Oct 23, 2013
I don't know why when I make an automatic intersection the curb assembly is placed on a lower elevation respect to the main and second roads in all quadrants.
View 9 Replies
View Related
Sep 5, 2012
im using 2008 autocad . whenever i make an attribute using ATT command. it's forced as uppercase. how can i use lower case letters?
View 9 Replies
View Related
Apr 16, 2013
How to read dimension value whether it have upper value and lower value
View 3 Replies
View Related
Oct 16, 2012
I changed the configuration in Tools/Options/Open and Save/File Save, to save as Autocad2004/LT2004 Drawing (*.dwg). But sometimes automatically the program saves as Autocad2013. It is critical for me because I work with people that still use Autocad2004.
View 6 Replies
View Related
Apr 10, 2012
I have attached a view of a wall. I remember seeing a video showing how to take a wall detail like this. Cut and move the lower portion closer.
View 4 Replies
View Related
Apr 11, 2011
I have one problem presentaly i am using Autodesk Inventor Pro 2011, if i have to open a model which is created in Autodesk Inventor Pro 2012.
Autodesk Inventor Professional 2012
AutoCAD Mechanical 2012
Windows 7 64bit, Office 2007 Pro
Intel(R) XEON(R) CPU @2.40GHz 2.53GHz, 4.00 Gb RAM
NVIDIA Quadro 600 Graphics
465GB SATA TOTAL, 124GB SATA working folder
View 6 Replies
View Related
Aug 23, 2012
I am using acad 2010. I have the ability to draw a 3d polyline on the screen with a different xyz value for each vertex using a digitizing puck. I need a lisp routine that will allow me to adjust the z value only (not the x and y values) on any 3d polyline. I just need to raise or lower the z value at any vertex and repeat if nessasary but I don't want to type it in, I want to raise/lower the z using digitizing puck (with z wheel)....example: I draw a 3d polyline which has 9 vertices with different elevations - vertex #6 is 22.6 (too high) in the z value so I need to drop it to 22.4 without typing it in. Vertex #8 is 12.2 (too low) so I need to raise the z to 12.6 without typing it in and using the z wheel on my digitizing puck. Others have tried and but this is a bit complicated and I may have not expressed it correctly.
View 2 Replies
View Related
Nov 2, 2012
I have an assembly consisting of both sub assemblies and individual parts.When I insert the bill, it is only showing me the parts and assy's needed to build the assembly.Is there a way to have it list the sub assemblies and then their lower level parts, with quantities?
View 2 Replies
View Related
Aug 10, 2012
Some images in threads are now showing up with the lower portion of the picture blacked out. Its like there is a limit on how large the image can be. Many times what the posting memeber is trying to show is blacked out.
View 9 Replies
View Related
Apr 27, 2012
I would like to save my inventor Part and Assembly model file in a lower version. Like in our company we use both Inventor 2012 and 2010. Once the file is created in 2012 and when shared to 2010 users they are unable to open, is there any possiblities to open 2012 files 2010 like how we do in Autocad.
View 2 Replies
View Related
Jun 8, 2013
I am trying to import photos from my computer to Photoshop elements 11. It has imported most but wont import some as "file quality is too high". How do I get around this? Do I have to downgrade the quality of my photos? To do editing wouldn't you want the best quality photos to start off with?
View 6 Replies
View Related
May 31, 2012
I like the AutoCAPS setting in Mtext, however I occasionally use lower-case text when I am typing, such '2"x4" STUDS' . . . now, I do have a problem with AutoCAPS though:
Example - I copy '2"x4" STUDS" and paste it into another Mtext and the lower-case 'x' is automatically pasted as an uppercase character.
Are there any settings for AutoCAPS, or maybe for the copy/paste command that I can change to allow lower-case characters to be pasted into text when the AutoCAPS is on? It is a bit of a hassle to turn off AutoCAPS and turn it back on.
View 6 Replies
View Related
Nov 29, 2012
Just switched to 2012 from 2010. When I try to edit the description format field in the properties window of a selected cogo point, I can't type in caps, it's all lower case. If I right click and edit the point, I can use capital letters, however. (running C3D 2012 sp4, Win7 64bit, 8GB)
View 2 Replies
View Related
Jun 24, 2013
I have downloaded a few lower thirds from a website and they download as .mov files.
I am trying to add text to them and lay them over some product spotlight videos for my work.
I was thinking that they were going to be in template form but they are not.
What is the best way to add text to these .mov lower third files?
I just have to create my own animation for the text to follow along the lower third?
View 2 Replies
View Related
May 14, 2012
How to lower the opacity of one photo in order to place it on top of a new layer on another photo?
View 4 Replies
View Related
Aug 4, 2013
I am having problems using VideoStudio 15 to convert a PAL-based file to NTSC.
What I want to do is lengthen the video and to lower the tone/pitch with it (from 25 fps PAL to 23.976 fps NTSC, pull-down style).
View 2 Replies
View Related
Jul 29, 2004
I made an animation a little while ago and the file is over 100K. I was just wondering, is there a way to make that size smaller? I'm using Photoshop CS by the way...
View 5 Replies
View Related
Mar 4, 2009
I'm using APS version 6,
If I make a change, like Invert of a filter, it doesn't apply to all open underlying layers no matter if they are Linked, Grouped or anything else I can figure out. Adjustment Layers do apply to all below, but not other kinds of changes/filters.
View 2 Replies
View Related
