AutoCAD 2010 :: Library With Water Pump Stations As A Block
Jan 18, 2012Where is possible to find a library with water pump stations and other hydraulic objects as a blocks?
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Making Design For Centrifugal Water Pump - Creating Loft
Aug 12, 2012I am making a design for a centrifugal water pump, the rotor was no problem, but I'm having some trouble designing the top case. I thought it would be easiest to create the channel for the water outlet using a loft feature.
I attached the ipt. there are two sketches, and I need a loft from the small to the large one, all the way around the circle. when you see it you'll probably understand what the result should be, but, no matter what I try, either I get an oddly shaped loft, or an error.
AutoCAD 2010 :: Creating A Block Library?
May 15, 2013I am using AutoCAD 2012 and have made lots of different files with individual drawings in them. I am planning to go into each drawing file and create a block for the drawing. After that I want to make all the blocks available in one drawing.
View 9 Replies View RelatedAutoCad :: Landscaping Block Library
Oct 13, 2011I'm a landscape architecture student that is looking for ways to speed up productivity but I want to make sure that I'm doing things the right way. I'm working on creating a library of blocks of different categories(trees, shrubs, cars, people, etc) that I can setup in a separate autocad file. From there, I want to be able to use the Design Center or create tool palettes to easily insert my symbols.
I mostly work in Decimal Feet. I want to create my tree/plant blocks where the diameter=1 unit, so I can scale my plants based on the actual diameter of the trees.
I'm collecting different blocks from around the internet and organizing them into a single file. The problem is that they are all different units. When I try to insert symbols from the Design Center, I cannot get them to scale correctly. Most are already scaled to equal 1 unit but some are "radius=1 unit" and others are "diameter=1unit". Of course, I want to make everything consistent to "diameter=1 unit".
In my library base file, what do I need to set my units to?When creating a block, what do I need to set my block units to?Any other tips for creating a plant block library?
AutoCad :: 2D Pipe Block Library
Jul 10, 2012How a 2D pipe block library that includes galvanised threaded pipe to European or British standard? (EN 10241 & EN 10242, I think?)
View 3 Replies View RelatedAutoCad :: Setting Up Block Library?
Apr 21, 2011setting up a CAD block library.I have been collecting blocks of furniture and plants for CAD projects into a single dwg file - my library. I then copy & paste the blocks as needed into my project file. Usually I have to BEDIT them to change layer & then scale to size. I have tried adding blocks to the Tool Palette with no success.
View 5 Replies View RelatedAutoCAD Dynamic Blocks :: How To Block Library
Aug 16, 2011How can i add Blocks Library to Acad2012 like in the older versions and see them by clicking any button as icons menue.
View 5 Replies View RelatedAutoCad :: Create A Dynamic Block Library?
Sep 2, 2011I am trying to create a dynamic block library but can't quite seem to get it right.
The only dynamic feature I need to use right now is visibility states so i'm sure it's something simple that i'm just not seeing, but I thought I would ask everyone's opinion on the best way to do it.
What I am trying to do is set up a full common library on our network that our whole team uses. At the moment we all have our own block library which can sometimes cause problems. The file location / folder set up etc is sorted out but it's the actual blocks which are making life hard for me as until now we haven't really used dynamic blocks.
The only way i've been able to get the blocks where I want them so far ends up in a 'double block' meaning the block itself becomes a block again once I write it to the desired folder. This works but is not ideal as I can't get the vis state drop down menu by clicking on the block and have to edit the parent block to change the vis state.
Basically I have no problem creating the exact dynamic block I need, and no problem with a location to store them, it's more storing them that's giving me a headache.
AutoCAD 2010 :: Inserting New Block And Entering Attribute Data By Selecting Another Block?
Aug 13, 2012Is it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.
AutoCAD 2010 :: Dynamic Block Grips - Block Does Not Change When Insert In Another File
Oct 28, 2013I have created a dynamic block with a stretch, flip and rotate. Everything works great in its file. When I insert it in another file, the grips move but the block does not change.
AutoCAD 2014
AutoCAD 2010 :: Convert Block Back To Title Block Or Border
Feb 15, 2012We have a title block and border which is used in MS. If this is referenced using AMTITLE then it acts as expected. We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing. ACAD does now not see them as a Title block or border but as blocks. We have a process to bring DWG's into SAP and this will check for a title block and border.
The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again. Is there a way to convert the blocks back to how they should be?
AutoCADM 2011 SP2
XP 32-Bit SP3
Photoshop :: Fixing Bright Green Water.. Into Clean Water
Jul 4, 2004I have a pic that has a really pretty view of a bridge over a little stream. Only problem is the water is covered with slimy green algee.
View 5 Replies View RelatedAutoCAD Dynamic Blocks :: Rectangular Box To Move Around Pump?
Nov 15, 2012I want to rotate and scale the pump, which that seems to still be working fine.
It has a rectangular box that I what to move around the pump, keeping the box and text East-West, I had been able to do this before in AutoCAD 2010, I am currently using 2013.
AutoCad 2D :: Produce Pump Symbol For Piping Diagram?
Mar 17, 2009i am trying to produce a pump symbol for a piping diagram. 2 polyline arc and a base in 2D. i have added a linear parameter and a scale action however when i scale my block the polyline width changes can i stop this happening ?
View 9 Replies View RelatedPhotoshop :: Transform Brush Of Water In (water Authentic)?
Mar 7, 2012any tutorial to transform a brush of water, in "water authentic"? Color, brightness, etc .........
View 4 Replies View RelatedAutoCAD 2010 :: Way To Have Block Within Block That Has Same Ability To Move Around
Aug 15, 2013I have a block (room info) that has five line os text with attributes that display grips which allow them to be moved in whatever drawing I put them in. Within that block there is a little polyline that is the square with a dash through it to represent sq. ft. that I made into a seperate block ( sq ft tick). The room info block part of it works great in all my drawings, but the darn sq ft tick block within the room info block won't budge! I have tried giving it a seperate insertion point and giving that block its own attribute, but no luck.
Is there any way to have a block within a block that has the same ability to move around as the other elements?
AutoCAD Inventor :: Motor Windings For Small Centrifugal Pump?
May 6, 2013I have been attempting to create motor windings for a small centrifugal pump.I found these 2 pictures of windings created with Inventor but i was unable to view them as files.How are the copper wires formed to get the windings like in the pictures attached.
I could only manage the rim in the Inventor file and not the wires
It looks like a wire is created and then patterned but the looks like a 3D sketch is needed for wire and then circle pattern?
3ds Max :: Make Water Particles To Collide With Water?
Jul 7, 2011I want to make a fountain that has water jets that cause ripples when they hit the water. I have tried the basic reactor water and Pflow setup, as well as super spray, but neither seem to work. Is there any way to accomplish this without "faking" it by doing something creative with the water's texture?
View 9 Replies View Related3ds Max :: Animating A Piston Pump
Apr 22, 2011I am working on a small animation for a piston pump. I have managed to get the shaft and piston head moving in the correct motion using an expression controller and now trying to get the arm part to work in sync is causing me problems, it just seems to be largely out of place. There is probably a simple solution for the problem although as I am new i am still getting to grips with the software. I have attached a file for the scene.
The attachment feature doesn't seem to be working therefore i have uploaded the file to this link:
[URL]........
AutoCAD 2010 :: Materials Library Is Not Installed?
Apr 2, 2012When I try to open the materials browser, a window opens that says "The AutoCAD Materials Library is not installed." Helpfile says it's included in the product. The texture maps search path in options is looking at the materials folder on the hard-drive. How do I load it without having to uninstall/reinstall autocad? Is the materials folder on my hard-drive no the materials library?
View 2 Replies View RelatedAutoCAD 2010 :: Materials Library Cannot Be Changed
Jun 23, 2011Another problem i'm having with autocad 2012 is one with the personal Materials Library.
When i try to add materials to the "My Materials" library i get the following error :
Changes to the library cannot be made.
The library file is currently locked or missing.
I'm using autocad 2012 as an administrator and am the only ony using the library file on this computer.
AutoCAD 2010 :: Content Library Text Not Displaying
Apr 18, 2013We currently use AC 2012 Mech.when selecting from the menu content/fasteners/screws and then opening the countersunk head types, many users will see what is dispalyed in the attachment good picture.png... the type of screw is displayed (we can see the text)...while other users selecting the same prompts from the menu will see what is displayed in the attachment bad picture.png... the text is NOT displayed...this occurs for many different types of content, not just the fasterners/screws...
View 2 Replies View Related3ds Max :: Make Oil Pump From Inventor Assembly File
Jun 26, 2012I'm trying to make an oil pump from an inventor assembly file. Whenever I import the assembly, 3DS only recognizes the assembly as one object, so I had to import each part. Whenever I try to do a link constraint, it rotates the object in the wrong direction.
View 2 Replies View RelatedAutoCAD Civil 3D :: Transfer From Total Stations?
Sep 2, 2012How can I transfer (download) measured data from total stations 'Trimble' and "Leica" to AutoCAd Civil 3D 2013? Must I find a module from the sites of these manufacturers? Or how can I change from total stations formats to the Feald Book format?
View 6 Replies View RelatedAutoCAD Civil 3D :: Set Profile View Stations?
Nov 6, 2012I am using the profile sample VB.net program to create an alignment, profile view and profile. The profile view defaults to start at station -0+25. I want to set the Profile View starting station based on the "Align_strt_sta" value I have defined based on the Alignment Stationing. I have tried the .StationStart() shown below, but I just get a unhandled exception.
' Create the profile view and add it to the alignment's ' collection of profile views. If oProfileView Is Nothing Then id = ProfileView.Create(m_CivilDoc, Prof_View_Name, PROFILEVIEW_BANDSET_STYLE_NAME, Align_Name, pviewposition) oProfileView = pviewTransaction.GetObject(id, OpenMode.ForWrite) End If 'oProfileView.StationStart() = Align_Strt_Sta oProfileView.Description = "Profile view of alignment '" & m_SampleAlignment.Name & "'" oProfileView.StyleName = PROFILE_VIEW_STYLE_NAME
AutoCAD Civil 3D :: Creating Points At The Stations Of Alignment?
Oct 18, 2012Creating points at the stations of an alignment,
I wanted to get the (x,y,z) of the stations of an alignment, but sounds not to work.
In the screenshots below, I got the message “The specified station is not valid for this object” and couldn’t proceed!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD Civil 3D :: Alignment Stations Label Style
Aug 9, 2013I was trying to find a way to not have the last ending Station Label show up on my centerline is there a override or way to tell it to just label to the last 100 or 50 foot station?
View 4 Replies View RelatedAutoCAD Civil 3D :: Petrol Interceptor And Pumping Stations
Jan 7, 2014Is there a way to model an intelligent petrol interceptor and pumping station in Civils 3D?
If so will these integrate with Windes?
AutoCAD Civil 3D :: Pipe Elevation Label At Stations
Jun 19, 2012How do I get Civil 3D to put pipe elevation labels at even stations?
View 1 Replies View RelatedAutoCAD Civil 3D :: Slope Stake Report Missing Stations?
Jan 18, 2013I have created a slope stake report and have just noticed that there are stations missing. The stations are there in the cross secitons but not there in the slope stake report.
All sample lines were created at the same time. All surfaces are present throughout the entire cooridor.
AutoCAD Civil 3D :: How To Calculate In A Table The Volume Of Cut And Fill Between The Stations
Sep 18, 2012How to calculate in a table the volume of cut and fill between the stations, The horizontal and vertical alignments are generated along with their sections. I’m wondering if there is a tool that summarize the volume of cut and fill between the stations in a table.
View 3 Replies View Related