I'm trying to make an oil pump from an inventor assembly file. Whenever I import the assembly, 3DS only recognizes the assembly as one object, so I had to import each part. Whenever I try to do a link constraint, it rotates the object in the wrong direction.
View 2 RepliesMy assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
I have been attempting to create motor windings for a small centrifugal pump.I found these 2 pictures of windings created with Inventor but i was unable to view them as files.How are the copper wires formed to get the windings like in the pictures attached.
I could only manage the rim in the Inventor file and not the wires
It looks like a wire is created and then patterned but the looks like a 3D sketch is needed for wire and then circle pattern?
I am making a design for a centrifugal water pump, the rotor was no problem, but I'm having some trouble designing the top case. I thought it would be easiest to create the channel for the water outlet using a loft feature.
I attached the ipt. there are two sketches, and I need a loft from the small to the large one, all the way around the circle. when you see it you'll probably understand what the result should be, but, no matter what I try, either I get an oddly shaped loft, or an error.
I have an assembly (ex: test1.iam) that have many parts.
There are 2 of them, that I what to make only one assembly, and I would like them to stay in same the position as in test1.iam.
How do I do that?
what kind of work flow I can use to make an assembly adaptive as possible..I need to make a machine fixture that requires cut outs for three parts. The fixture is made from a 8" x 5" x 0.19" thk piece of UHMW. I've made the "blank" and it features the work planes I need to place the three parts that the cut outs are derived from.
At first I just started the assembly and placed the parts where they should be and then used sketched outlines to define the cuts. However, since the parts are there they get "cut" as well.
I was wondering if I could make adaptive sketches linked to these parts and then import THEM into the correct plane. I could then use them to define the cuts.
find out a way to make some sort of parametric assembly.
Where I work, we make conveyors and those conveyors need legs. Those legs are all built the same except for the height and width. They are made of 2 tubes with a cross shaft between them + bolts, washer, plastic end cap.Is it possible to create some sort of iassembly or ipart for this? When creating a conveyor I would like to choose the height and width of those legs when I import them into the assembly.
How to make thread in assembly?
View 9 Replies View RelatedI have the Silicon crystal (as attached herewith along with he parts and the assembly). It is a simple and small structure which I created from 3D Cartesian coordinates. Now, I need to repeat this structure in X Y plane to make a bigger structure.
View 2 Replies View RelatedI have an assembly that includes iPart.
For example there are:
C: Part1
C: Part1 Part1-01
C: Part1 Part1-02 ...
C: Part2
C: Part2 Part2-01
C: Part2 Part2-02 ...
I need a macro to make the change in the assembly. You need to replace Part1-04 to Part2-04. Which method should apply for this?
Is there a way to have inventor make each part in an assembly have a different color? I like to work in assemblies like this because it is easier to tell the parts from each other. It's just time-consuming to go through and change everything if the assembly was designed with realistic colors. I am thinking there might be a macro for this, but I don't have much experience with macros so idk.
(extra brownie points if the method has the capability of reverting back to realistic colors)
Inventor 2014
HP Pavilion dv6t-6b00
Intel Core i7 2670QM
AMD Radeon HD 6490M
8gb RAM
Windows 7 64 bit
3Dconnexion SpaceExplorer
I want to import some of the iproperties of one ipt file into an iam file.how to do it.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
Describe the external referencing of a part file by an assembly file? I keep getting confused between part file and an assembly file.
View 2 Replies View RelatedI have a sketch on a component. That component is being used in an assembly. The assembly drawing (.idw) does not show the sketch on that component. I have made them visible on the component, but don't want it visible on the assembly model. (only the assembly drawing)
View 1 Replies View RelatedWhen I double-click on a component in an assembly to edit it, the rest of the assembly becomes transparent (or translucent is a more accurate term). Is there a way to create a visual style (or use some other method) to make the entire assembly translucent like this, just as I'm working with the assembly performing all the usual assembly-type operations? For example, I can operate under the "Shaded" visual style, or the "Wireframe" visual style, or the "Monochrome" visual style.
Is there some way to work with a "Translucent" visual style so that I can see the internals of my assembly as I'm placing parts, applying constraints, etc.?
I have a big assembly. It used to have aprox 280kB.
I have created the five flexible assemblies and it grew up to 2100KB and became
quite slow even with a lot of supressed parts.
The question is: should I blame the flexible stuff for this slowup?
Am trying to convert this pump into solid ?
View 6 Replies View RelatedI have a 3ds max file that the company i work for needs to get into inventor. I have tried exporting the file to .sat, .iges, and .dwg file an none have imported the assembly into inventor properly.
View 9 Replies View RelatedIs there a way to set up the BOM in the assembly file to show the top assembly as a line item with all it's children (and their children) listed underneath?
View 9 Replies View RelatedI attach a assembly file.
In front view, I can see all elevation drawing (DWG file)
but, when import this file to IDW sheet, I can't anything . I can look at 3D object section only.
When trying to import a NX 7.5 assembly file into inventor, there is a lot of duplication of parts, missing parts, and scattering of other parts. Is there a way to successfully import an assembly from NX to inventor, if so does it include all the original sketches and feature history that created the parts, or is that not possible?
View 8 Replies View RelatedHow to convert Inventor assembly file to FBX file?
View 6 Replies View RelatedSee attached. Basically, the view for my IPN is not the same as the view from my assembly file. The view on the left in the attached PNG is of my IPN and the view on the right is my assembly LOD.
Any answer that will clarify why my IPN file shaded views are different from my IAM shaded views??
IV 2010 Tube & Pipe SP4; ACAD Mechanical 2010;
2.5 ghz Xeon Processor
8 gb RAM
Windows 7 Professional x64
EVGA GTX 560 2gb DDR5
I took an existing assembly from one specidifc directory and copied it to another location. Then one part by one I use the replace command to swap out the parts to map to the new location because when I went to iproperties it was still pathing to the old location. I change the new parts physical features (i.e. length, diameter).
I get done with it and all references are pointing to the new location.
I exit out of inventor and call up the new assembly and it has mate errors because the parts are all of the old ones from the original location. Why is it not remembering or retaining the new parts and there locations?
Even when I have gotten this screen I have selected "No" to the bottom (2nd) selection which is the original location I do not want.
I have to send one of my assemblies to a customer who has Solidworks I believe, so I thought I would just save the assembly as a step file, but when I try to do this it crashes my system probably due to the fact that I have quite a bit of embossing on one particular panel. Any other options?
View 4 Replies View RelatedIs there anyway of finding out a part or assembly files dependencies external to inventor without using vault?
View 1 Replies View RelatedI am trying to create a step file of an assembly, the assembly consists of maybe 50-100 parts. I am currently running Inventor 2009. In a new part file, I derive the assembly to make it one solid entity. Then I save that as a step file. However when i open the step file, i have a bunch of extra "parts" in my model tree. These parts seem to be where the bolts and threaded holes interfere or not all parts joined to the main solid model. How can I eliminate this?
Also on a side note, is there anyway to change the orientation of the WCS?
In inventor 2013 professional I have a problem using the section view in my assemblies files. When I active the section view it works well, as soon as I open a command (for example the measure of a distance) the section view disappear and the assembly appear in entire view.I didn't modified any configuration on my software.
View 4 Replies View RelatedIs it possible to identify the location of a part in an assembly file?
I cannot access (or find access to) global locations, just local. You may ask, whats the problem? Well, right now, I have 10 subAssemblies and they are all "located" at (0,0,0), which means I have 10 solids sharing the exact same space. This problem can be easily fixed if I can compare the Global Origin to a Local Origin, but I can only find the "work axes origin" which is worthless to me.
I am trying to create ADSK file for an assembly created in Inventor so that I can export it to Autodesk Revit. How can this be done?
View 5 Replies View RelatedI have used the derive component command to mirror parts many times but each time in the past I have had a desire for that part to be linked to the one I mirrored. I have a new situation where I would like to mirror a skeleton part file that I used on one assembly to make a new assembly.
For example, I used the part attached below to create a stair frame for a steel framed platform I am working on. It consists of geometry, work features, and sketches that represent the nosing line, guardrail, stair stringers, etc.
I have another stair on the other side of the platform that needs to be a mirror image of this one plus a few unique modifications. The new assembly cannot be "linked" to the other one as each of these assemblies needs to be modified independently.
How can I mirror this part to reuse work I have already done without having to create a new skeleton file from scratch? Using the derived part method, then breaking the link makes all of my sketch entities unconstrained.