I have purchased a model in 3DS format. Along with the model came a bitmap file (containing what looks like a mixture of all materials for the model) and a .mtl file.
how I go about mapping the model using the supplied .mtl file and the bitmap.
Using CS5. I am unable to open two files supplied by our client. These two files pre-date CS6, and were made by a branch of our client in Germany. We are in North America. There are many layers of bureaucracy between us and the actual creators in Germany, so communication is impossible.
An attempt at opening the files results in the error, "Could not complete your request because the specified color book cannot be found".However, in this case it is NOT POSSIBLE to "work with the file creator", and it is NOT POSSIBLE to use a different version of PS with the correct books.
I have Color Manager, and I have cluttered up my CS5 installation with every likely-looking color book from Manager in the hopes that one of them would be the right one, but to no avail.So. What do I do? Surely by now Adobe has created some sort of utilty that allows PS to simply tell you WHICH color book is missing so you will know which one to go and get? No?
I am having some mapping difficulties with regards to applying a JPEG as a material map onto a surface material. Below are the details.
I have a surface model which was generated from topographical information. I have aerial photography of the area the topographical information is based on. The photography covers approximately 1000m2 area.
The topography area in contained within this area, it is in the upper right hand corner of the square photo. I have applied planar mapping to the surface . I resized the mapping area of the surface to suit the area that the photo covers (I created a boundary rectangle and adjusted the mapping size to suit). I created a customer material using the jpeg photo I applied it to the surface . The image scale is set to 1000 . All other settings remain as default settings.
The mapping displays over my model, but its on the wrong location, i.e. information contained within the jpeg that is out with the topographical area is appearing on the model. When I turn off tiling the mapping disappears from my model completely. I have read a few tutorials today and went back to basics on a few trials by creating blocks and applying the material and scaling it that way. All behave as anticipated. Apart from this.
I am trying to alter the properties of a mapping layer file I have created so that both the block and the text value are oriented horizontal on my sheet no matter where north is pointed.
View 2 Replies View RelatedI was just about to start on an order I got for a banner. I recieved some materials to work with including fonts. However, I have been using photoshop for a few years now and I never heard of the adobefnt.lst files. However, I found out about what they do and what they are basically for, I think.
However, the real problem is that i recieved a font folder. Within this font folder there was another folder named: "Helvetica Neue Condensed 3". Within this folder there were 8 files:
AdobeFnt.lst
HelveNeuHeaCon
HelveNeuHeaConObl
HelveNeuLigCon
HelveNeuLigConObl
HelveNeuMedCon
HelveNeuMedConObl
Helvetica Neue Condensed 3
So to me it looks like a font and some different styles. The problem is i can't install these files, which names' appear to be font names, I tried giving them some font extensions, like .ttf but it didn't work.
How to install and use these files?
Have some photos of a warehouse fire in Plymouth Indiana. Files were saved as .jpg Can't get them to open.
One message is "Pain't cannot read this file. This is not a valid bitmap file or it's format is not currently supported." Couldn’t display DSC-0023.jpg because a suitable graphics importer could not be found.
Carl Beason
Windows 7, Photoshop cs4
The help file for user-supllied text added to dimensions says, "To add user text above and below the dimension line, use the separator symbol X. Text that precedes this symbol is aligned with and above the dimension line. Text that follows the X symbol is aligned with and below the dimension line."
How do I get the same effect from the dimension Properties Palette later? Would I have to re-create a dimension to do this in another session? I need text below the dimension on a new line, and have not been able to do it using the Suffix field in the Properties. Adding text there only appends it on the same line. (Or, am I missing a trick here?).
I have a .dxf model and I need the file in .ipt format as a 3d model. (I got the file from a website)
View 3 Replies View Relatedi'm attempting to photoshop this so the foam in the beer separates in the form of the supplied black shape. like it looks like its been stamped in the foam.
View 2 Replies View RelatedI am currently using this method, creating a 1-bit bitmap from a grayscale "distress" texture bitmap, choosing transparent fill or outline depending on which area i need trasparent and powerclip it in text or other vector object.
Is there a way to achieve the same distress effect with transparency with FILL ? pattern fill maybe? eg can i save in some format this bitmap to use it maybe as a pattern in pattern fill and retain transparency ?
sample file (X4)
One of our client facing problems that Autodesk 3ds max 2011-64 bit does not show the option to import “.mov” file as bitmap map in materials and also not render in “.mov” format whereas Autodesk 3ds max 2011-32 bit does.
They had installed only Autodesk 3ds max 2011 64 bit only on their machine and don’t want to install it’s 32 bit version.
When I export my .ai file as a bitmap, Illustrator adds a 1px wide column of blank space on the left side that I keep having to crop off. I can't figure out why. I even deleted everything else from my file except the colored background that takes up 100% of the canvas and is positioned at 0 X & Y... but my 1920px wide file still exports as a 1921px wide bitmap with an empty pixel on the left.
View 3 Replies View RelatedI'm using PSP Ult ver. 13.21.20 and have been getting this message for awhile now. I'm not able to associate any jpg or bmp files with PSP. When I right click to "Open With" PSP is not an option and trying manually does nothing. Some pics I can drag in and open. Dbl clk only opens the Instant Viewer.
View 6 Replies View RelatedGet this error?
the bitmap file: (null) cannot be found.
Why I get this error, not all the time, but just started getting it on one project. selectiing delete allows me to work.
IV 2013
Win7 64
I hightlite the table in the viewport than right click to get the menu . Then export it and bring up the export dialog box. It keeps saving the file as a bitmap and not a csv file. I did get it to work once when I exported it the first time as a csv file. Now the second time trying to export it , it is coming up as a bitmap file. What am I doing wrong.
View 4 Replies View RelatedI have an old 3DSMax file that when I open it in 3DSMax 2011 I get an error saying it can't find a few JPG files needed for some materials. Normally, I would simply go into the material editor and delete the materials that are referencing that file, but I cannot find those materials no matter how hard I search. For example, I used the "Material > Get All Scene Materials" function in the slate editor, and looked at each one's maps rollout--but I could not find the problematic references.
I did find the problematic file references in the "Asset Tracking" dialog and figured I might be able to remove them in there, but alas I was unable to do so. Maybe I don't know the full extent of what the Asset Tracking dialog is for?
Is there a way to remove materials in the scene that are causing those problems? I'm not sure what is causing the error.
3DSMax 2011 | Windows 7 Ultimate x64
Apple iMac 27" Bootcamp
Intel Core i7 3.4GHz
16GB RAM
ATI (AMD) Radeon HD 6970M
I'm working on a VB.NET program that resizes the current drawing window and creates a bitmap file.
Currently, I can get the window to resize to the correct length and width. However, I'm lost as far as creating a bitmap. I found some code in C# on the Through the Interface site: URL....
Unfortunately, I'm not that familiar with C# and can't get the code to work if I try to convert to VB.net.Ultimately, I want to then convert the bmp file to a gif with a transparent background. I know how to convert a bmp to gif, but is it possible to programmatically convert it to a transparent background?
Illustrator CS6 can export a bitmap monochrome file (not grayscale)?I have to export this old format file for a client and i have to understand it's possible.
View 4 Replies View RelatedI have a screenshot, which I have cropped to a specific area to show a specific part of a window: a shape with a bitmap fill, or a cropped bitmap whichever way you consider it.
Next I have another screenshot, of exactly the same dimensions, showing the same window - but showing that window in a different state.
Both screenshots are bitmaps in my document, both appear in the Bitmap Gallery.
I'm not sure if something changed in recent versions of Xara, or I have forgotten the drag+key combination, but how can I drag the second bitmap onto a copy of the first bitmap-filled shape so that the SAME part of the bitmap is shown?
Using different combinations of SHIFT and CTRL I seem to be able to replace all instances of the first bitmap with the second: It is scary that a shape with a bitmap fill offscreen or on another page can be changed unwittingly!
how to send a file to a website without making it a bitmap.
View 2 Replies View Relatedi backup my files and now when i want open them see this message
error reading a bitmap in file......
this is my sample file
[URL].....
my old corel was X3 and now cant open with X5 sp 3 or X3.
my system is:
windows 7 x64
4GB ram
cpu intel core i5 760
I'm using Coreldraw X3,operating system, Windows XP Professional version 2002, 1GB of RAM,free space of 4.56GB on C drive, 34.8GB on backup drive,display adapter Radeon X300,HP compaq dc7600 convertibleI'm having a lot of difficulties opening a series of files. I had been working on a laptop for a few months and upon returning to the office I tansfered the files to my desktop to complete thr final revisions. I worked on my desktop for 3wks without no problems and then one day I went to open the files and recieved this message on all of them:"Error reading a bitmap in file"I have since tried numerous methods with no success.
View 13 Replies View RelatedWhen I try to export a bitmap to PSD format or import a PSD file, the filter list does not show any import or export for Photoshop...what gives?
Corel Draw X5 version 15.20.686
Corel Draw Sign Designer
The imported file is probably from Illustrator. The vector element in question is text converted to curves with a CMYK bit map fill. CorelDraw X5 seems unable to extract the bitmap fill from the vectors. What's up with this, is there anyway to extract the bitmap fill?
View 3 Replies View RelatedHow do i program my corel photo paint to compress large jpeg photo file to a smaller size and save into another folder.
View 5 Replies View RelatedI am a new user to AutoDesk 2013. I have a bunch of .stp files, which I would like to convert to 2D .dwg s, which have all dimensions, as part of the. Is there a plug-in, or a stand alone software package, which can read the .stp, and extrapolate the embedded dimensions?
View 9 Replies View Relatedi had transferred the Revit MEP model to 3d max with FBX file. However, i found that i could not select a single part of duct, it seleced all the components.
Ssee attachments
I have an AutoCAD drawing (I did not create it) of a proposed trail in my city, and I've been tasked with making some kind of model or render of a section of it. I'm at a loss for how to even start, unfortunately. In the end I would like to have an accurate 3D model of a boardwalk section of the trail with surrounding terrain. I have Sketchup, Google Earth, and Revit at my disposal.
My first problem is topography. When I import the CAD drawing to Revit it seems there is some topographical data, which will be needed to realistically build the boardwalk on top of. I was able to get the terrain of the area into Sketchup from Google Earth, but then I don't know exactly where to build the model.
I've attached an image of a floor I created in the outline of the boardwalk. The area in question begins at the two handicap parking stalls (represented as the two blue towers for some hilarious reason) and ends at the second square (a viewing platform). My preferred method would be get an accurate topograhic site in Revit, build the boardwalk, and then place surrounding vegetation so I can get some renders.
EDIT: I've attached "Screenshot 2" which shows I found I was able to create terrain in Revit by selecting a layer of the CAD file. However that layer is suspended above, and my placeholder floor is underneath. Now I just need to get the floor (representing the boardwalk) to go along the terrain.
i got for a project some files (in the pic below) wich i actually can use for an 3D model ( geodate's). Problem is, i dont know how i can use/open them to generate an 3D Model. How to figure out which programm I can use this files or how i can use them in AutoCAD?
View 1 Replies View RelatedOne time, a consultant sent us a 3D model in pdf format and I was able to rotate a model, cut sections and do an orbit rotation inside Adobe Acrobat.
I want to export my 3D model as a pdf file and able to do an orbit rotation within Acrobat.
Can you print a model file to scale without setting up a view with a scale? Like in Autocad, you could print the model space to a certain scale within the page setup manager. Does revit have anything like that? Or do I have to set up a sheet view prior to printing anything?
running revit architecture 2011.