3ds Max :: Toggle To Make Selected Object Transparent?
Mar 10, 2011I searched and CTRL-X turned up by somebody for a XRAY mode? That did not work, 3ds entered EXPERT MODE.
Sketchup has a XRAY see-thru mode...what is 3ds max equiv?
ADVERTISEMENT
GIMP :: How To Make Selected Area Transparent
Aug 12, 2011I have a cloud.png image and want to make the area around the cloud transparent.
So i used the 'select by color tool' and now i want to fill the selected area with TRANSPARENT.But the 'bucket fill' doesn't allow for that.
3ds Max :: Make Object More Transparent In See Through
May 20, 2011Iis there a way to make an object more transparent when see through mode is toggled? it is difficult for me to see through the object and wanted to set the transparency to like 25 instead of 50.
View 2 Replies View RelatedPhotoshop :: Make Object Look Transparent In CS4 / Low Opacity
Mar 5, 2012Using PS CS4 on Windows XP. I have an image on the left with apples showing 4 that are transparent (opacity set to 50%). I am wondering if there is a way to make the apple look transparent, but not transparent to the others so that the apples look more like they do on the right (not going through each other). I understand these are completely solid, but I was wondering if there is a way to make an object look like it's transparent, but not be able to go through another object.
View 9 Replies View RelatedPhotoshop :: Make Object Like A Glass Transparent
Nov 19, 2012I have an object that I need to photograph and make transparent for video purposes. How would I go about doing this with Photoshop?
I have a clean product shot against a white background, but I can also take one against black if that makes any difference. I tried searching the forums and the web but I think my wording was a bit too technical, and I was unable to find any information.
3ds Max :: Black Pixels Appear When Make Object Transparent
Mar 25, 2013This black oval appears when I go to front view after 'Alt X' to make the cube transparent, but it doesn't occur at an angle, only when in front view.
View 1 Replies View RelatedIllustrator :: How To Make Background Of Object Transparent
Dec 23, 2013How do you make the background of an object transparent in Adobe Illustrator?
I have been having issues with using the Magic Wand tool in Adobe Illustrator as well as the lasso tool.
Basically, I am trying to put a small graphic into a new Illustrator file.
The first thing I tried to do is to use the magic wand tool. But I found out that this did not work on a jpeg image since it did not have any individual objects to select.
So I tried something new. I opened the file in Adobe Photoshop and used the lasso tool to select an area. Then I coped this area. Then I tried to paste it into Adobe Illustrator. But the background was not transparent for the pasted image.
How do I make the background transparent.
I made this small video to show what I am talking about: [URL] .....
Illustrator :: How To Make Edge Of A Object Transparent
Apr 16, 2013I have pictures I've brought in from PS and traced them, when I go to overlap them, the white box from the images block the image behind it. How do I make everything around the image transparent so it doesn't block the rest of the objects/pictures..etc.
View 4 Replies View Related3ds Max :: Toggle Off Selected With Edged Faces?
Sep 3, 2013How can I toggle off "selected with edged faces" in 3ds Max 2014 always on startup? When modeling, I need to see the clean surface when pressing F4.
View 2 Replies View Related3ds Max :: Menu Item Display Selected With Edges Toggle?
Apr 10, 2011I have used the display selected with edges toggle quad menu item for years, and can't seem to get it to work for me. Is it broken?
View 5 Replies View RelatedPhotoshop :: How To Make A Transparent Object In Photoshop
Jun 22, 2006Recently I downloaded a colorSlider to study from flash web site. The author made a flower as an transparent in Photoshop (the center embossed area was remained), so it's color will be changed along with the colorSlider movement in flash. But I just don't know how to make a transparent object like the author did.
View 8 Replies View RelatedCorelDRAW X6 :: Update Outline Width After Resizing Object If Scale With Object Selected
Dec 14, 2013Resizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
Illustrator :: Jumping From Object Selected In Layers To That Object On Artboard?
Nov 22, 2013I'm working with 27 artboard in illustrator for one project. I would like to select the object I need to get to in my layers panel and have illustrator "jump/navigate" me to the object where it resides on the artboard. Is this possible?
View 3 Replies View RelatedAutoCad 3D :: Safe Frame Toggle - Make Window Proportioned To Render
May 8, 2013how can i have a preview of the area that is going to be rendered in the model window? (this command in 3d studio is SHIFT+F, for the ones that know what i'm talking about..)
so this is the point, I have to make a bunch of images all from the same spot and with the same framing, but doesn't matter, even if I save the views, the rendered image is always different. (this mostly because
I'm using multiple computers, so it's enough that the machine has a different screen resolution or that autocad on a different machine has a different user interface, to make the render completely different.... I'd solve it using always the same computer, but it's part of the request from my new boss)...
if I set up a camera to have a proportioned view? it looks that the camera preview window is totally random.
Xara :: Transparent Object With Non-transparent Lines?
Feb 17, 2014I'm sure there's a way to do this but for the life of me I can't remember and can't find it when I do a search. I have an object that is comprised of several lines that are grouped together, and I want to fill the entire group with a fractal cloud 3-color fill. In order to do so, I am creating the fill as a background, and making the object transparent, but when I do that, all my lines disappear (of course!) but I need the lines in it for details. Basically I want to layer this object
View 9 Replies View RelatedGIMP :: Why Selected Area Filled With Transparent Black
May 12, 2012I have selected a Layer in Gimp and I have a certain selection inside the Layer.
Now I click on tool "Bucket Fill", Mode=Normal, Fill Type=FG Color Fill, Affacted Area=Fill Whole Selection.
Opacity is 100%
The FG color is black.
But when I click into the selected area it gets filled with a transparent black! When I click again it gets more opaque and after another click its fully opaque black.
But why does Gimp fill the area transparent after I first clicked even though Opacity is 100.0??
Photoshop :: Making A Selected Color Transparent Globally In ImageReady
Jan 19, 2007How do I make a selected color transparent in all frames of an animation in ImageReady?
I know how to do that frame by frame, but it's really tedious when dealing with a large animation.
Photoshop :: Over Spray On Selected Object?
Jul 6, 2012Sometimes I get an overspray on a selected object. The object is selected and then inversersed. The object is then setup to be painted on the outside. I select a hard brush @ 100% and start painting..like I said it will be ok until I get to certain portion and I get like an overspspray. I have the setting on 0 feather on the marque tool, but there is no other setting on other tools for feathering. The object is in the regular ps mode and is not layered.. "how do selected an object to insure that I do not get any paint on the inside"...Are there more adjustment I can make that I do not see.
I am using cs5.1 extended
CorelDRAW X4 :: Moving Selected Object?
May 9, 2011For some reason Corel will not let me select an object and move it with my mouse, I can only move an object with arrow keys.
View 4 Replies View RelatedAutoCAD VB :: Stretching Selected Object
Aug 15, 2012I am writing a code to select an object (crossing) and to stretch it a certain distance on the y axis. This is the code that I have to select the object, but I cannot find what to use to stretch it. I actually found something to scale it, but it is not what I need. With ThisDrawing.Utility
Dim SP1sel1(0 To 2) As Double
Dim SP1sel2(0 To 2) As Double
Dim objSS As AcadSelectionSe
Set objSS = ThisDrawing.SelectionSets.Add("zzadsaaafatt")
' Select the object
[code]....
Illustrator :: Zoom To Selected Object Possible?
Jun 4, 2010Is there any way in Illustrator to zoom to selected object (I want to maximize the selected object to the window)? There is the FitArtboard and the FitAll, but a ZoomToSelected.
View 14 Replies View RelatedIllustrator :: Zoom In And Out From Selected Object?
Aug 15, 2013Can I setup Illustrator to zoom in and out from the selected object(s) instead of mouse point on ALT and centre otherwise?
View 2 Replies View RelatedIllustrator :: Can't Move Any Selected Object
Oct 4, 2013after returning to work in process, i am unable to move any selected object, or to move after selecting and copying and creating a new file?
View 3 Replies View RelatedPhotoshop :: Make Existing Object With Multiple Layers / 3D Object?
Jan 29, 2013I have a logo that I am working with and I need to make it a 3D object for what I'm doing in After Effects. I am trying to make it 3D so I can edit it in repousse because all I really need to do is extrude it.
I've tried the different options in the 3D drop down menu but none of them bring me to edit in repousse.
Also, I know that I can make it 3D in After Effects my making multiples of it and what not but I don't want to go about it that way. Also, I'm working with CS5.5 and the 3D renderer plugin in After Effects is only available in CS6.
CorelDRAW X4 :: Can't Move Or Rotate Selected Object
Mar 14, 2012My CorelDRAW has just developed a glitch - I can select objects but not move them (other than by using the nudge button) and if I click twice on the object it doesn't change the nodes to allow me to rotate - weird and seriously difficult to do any work in the programme. I've tried turning the computer off and on again and have tried the default setting.
View 5 Replies View RelatedXara :: Removing Parts Of Selected Object?
Jul 23, 2013Question about Xara Extreme 5. When I click on an object, there are a bunch of square dots around the outsite. When I use the pencil tool to go from one dot to another dot, waiting for the ~ to appear, Xara "sometimes" removes the "little" piece I am trying to remove... but other times, removes 90% of the object, keeping the tiny piece of the image (I am trying to remove). Is there a trick or shortcut so that Xara ALWAYS removes the smaller section? I thought that it would be, if you are selecting a piece (i.e. 10% of the selected image), it would remove it... but nope, sometimes it keeps the 10% and removes the 90%. Very frustrating and obviously I do not understand the use of this tool.
View 9 Replies View Related3ds Max :: Toggling White Brackets On Selected Object?
Jun 16, 2011i know i have seen how to toggle this on and off, but somehow mine are toggled off, how do i turn the white brackets of a selected object back on?
View 1 Replies View Related3ds Max :: 2014 - Disable Wireframe On Selected Object
Feb 18, 2014In 3dsMax 2014 I have noticed that when you select an object it will display it's wireframe. You use to be able to cycle through the F3 and F4 combinations to show/hide this wireframe however it does not appear to work in 3dsMax 2014.
Is there another way (besides the F3 + F4 hotkeys) to disable this wireframe on the selected object?
Software: Autodesk 3dsMax 2014 - Service Pack 3 (64-Bit)
3ds Max :: Modeling In Viewport - Cannot See Selected Faces Of Object
Apr 19, 2013I don't know what happened, but suddenly, i couldn't see the selected faces of the object i was modeling in my viewport, just the edges
what I want to see when I select faces is this (Minute 2) [URL] ......
Maya :: Poly Count On Selected Object
Sep 12, 2011I activated the Poly Count from the Display Menu; but it shows the components that are in the view at the moment. I'd like to know instead if there is a way to display the number of the components selected.
View 2 Replies View Related3ds Max :: 2014 - Selected Object Display Wireframe
Jun 26, 2013Ok so in previous version if you have an object selected, and hit F4, ( to urn on and off Wireframe display). you could have and object selected, without wireframe showing, or showing if you prefer.
This option seems to have been removed, or moved in 2014.