I use a setup with Shader List (Volume) with two mists. One regular and one to blur out the horizon. After working on the scene for some time I notice that the shader list now contains eight copies of the last shader. I think I would remember if I did that. So, whats up with the shader list?
View 1 RepliesRunning on XP pro SP3, all updates.
I purchased and installed PSP X4 ultimate (14.0.0.332), having first removed all traces of previous versions.
Install went fine and everything I've tried so far works as expected but I found one minor, if irritating bug:
I had retained in My PSP files a number of picture tubes, some of which, it turned out, were duplicates of those provided in PSP X4 and the Ultimate contents pack. So when I first checked the picture tubes, the usual window popped up listing the duplicates it had found, with the button to copy the list to the clipboard. However clicking on that button, the only thing that was copied to the clipboard was the first letter of the first entry in the list, not the whole list, as worked properly in X3 and earlier.
I then manually searched for and deleted the duplicates (which a copy of the list would have made much less time consuming, of course). To test that this was a reproducible bug, I then deliberately crated a new set of duplicates (simply by copying one of the subfolders in C:Program FilesCorelCorel PaintShop Pro X4Corel_10 to a subfolder in My PSP files picture tubes folder). Again the list of new duplicates showed up, but clicking copy to clipboard again only the first letter in the first item on the list was copied.
I populate the members of a (text) Paramter from an Excel file
i.e.
MyArrayList = GoExcel.CellValues.("MyExcelWB.xlsx", Sheet1", "A2","")
Now this list contains plenty of duplicates. Is there anyway inside iLogic to remove the duplicates.
Searched NG and did not find anything.
Given a list remove from list if both (nth 0) and (nth 5) are duplicates in list
(setq dolist '
(("CABLE, MIL-C-24640/18D " "IAF" "A/R" "FT" "6145-01-224-9183" "-" "3XSOW-7" "C-LC(1), (2)")
[Code]....
I am having trouble understanding "Exercise 7: Creating a pay item list". How to find video of how this is created, or information to better understand the .csv and .xml utilized by QTO better. I am new to editing any .xml codes.
View 2 Replies View RelatedSince installing CS4, there is a new item in the dropdown list when I
right-click on my desktop
The new item is "Adobe Drive CS4". It has two items showing under it. They
are "Connect to", and "New Project". The "New Project" is greyed out, even
when Photoshop CS4 is running.
I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
View 2 Replies View RelatedI am trying to create list item and SetNotifyProc to a method. In this method, I am trying to get selected list item entry and display the text somewhere else. But AI is crashing when retrieving the entry. What is the proper way to retrieve selected entry?
Here is my code
void ListItemNotifyProc(ADMItemRef inItem, ADMNotifierRef inNotifier)
{
IADMList list = sADMItem->GetList(inItem); // <-- is this correct?
IADMEntry entry=list.GetActiveEntry(); // <-- is this correct?
ADMUnicode *outStr=new ADMUnicode();
sADMEntry6->GetTextW(entry, outStr, 5);
}
For some reason the item numbers in my parts list are blank. All the other information populates.
I've gone to the assmebly and varified that the BOM tabs are active and there are numbers in there.
If I inser the parts list as 'legacy' it works fine.
I can't use the renumber function, it just makes all theh item number boxes go yellow in the parts list box,
Inventor 2013.
When I created a parts list this morning the list started with item 2 and skipped item 8 as shown below.
why would it do that? I know I can renumber the list, but then when I expand the subassembly to show the subassembly parts, they stay numbered 10.1, 10.2 ect. even though the subassembly has become item 8 with the renumbering. If I expand the subassembly before renumbering, I loose the indented numbering format and simply get numbers 1 to 18. True I could manually renumber all the components, but what would be the reason the parts don't come into the parts list numbered sequentially to start with?
Is there an application or document setting that will make the default state of a row in a linked excel file used in a parts list default to "off" (not visble)?
More specifically, make this apply to added rows.
We have finish schedules in excel that everyone links a parts list to whenerver they need to display a finish schedule on the idw. However, when we add rows (new finishes) to the the excel finish schedule, they get displayed on the idw parts list next time the idw updates wether they are needed or not. Our practice is to only show finishes that are used on the drawing - so frequently a large portion of the whole finish schedule needs to be set to "off" or invisible.
I have created an iAssembly which contains 4 assembly variations. I now want to create an assembly drawing for these variations.
In this case all my assembly variations will have the same assembly part number as essentially they are all the same assembly except for a few "change over parts".
I intend to have one drawing with multiple sheets. Each sheet will have one variation of the assembly on it with a BOM for that specific variation. The problem I am having though is that the drawing BOM for each variation are linked and as a result each drawing has an inconsistant item numbering (for someone in the workshop who doesnt understand the CAD package and iAssemblies - They ask the question: Why are you skipping item numbers in the BOM's)
Is there any way I can get each BOM to show the item numbers sequentially? I tried editing the drawing BOM item number but the problem is that method propogates the item number changes to all the other BOM's as well.... (It is also tedious AND in my opinion it is generally bad practice to edit the BOM at the drawing level)
I am trying to get a material volume report for a corridor structure. The overall dirt cut fill is working, but the pavement and base keeps showing up as zero.
I started with the surfaces made, (perhaps that’s the problem,) I made an alignment, used an assembly, made a profile, and sample lines, made the corridor. The assembly draws in the cross sections, but the materials report shows zero in the pavement and stone.
i = MessageBox.Show("Do you wish to Renumber & Sort BOM?", "My iLogic Dialog", MessageBoxButtons.YesNo, MessageBoxIcon.Warning, MessageBoxDefaultButton.Button1) If i = vbyes ThenTrace.WriteLine ("INV - Transfer; User Selection; Do you wish to Renumber & Sort BOM? - YES")'Renumbers & Sort BOMoPartsList1.Renumber oPartsList1.SaveItemOverridesToBOMoPartsList1.Sort("ITEM") Trace.WriteLine ("INV-ExternalRule - Renumber & Sort BOM#")Else if i = vbno Trace.WriteLine ("INV - Transfer; User Selection; Do you wish to change Renumber & Sort BOM? - NO")End if
what i want to do, is renumber the BOM by (001) then go to part list and sort by item.
IV2012 API with VB:
How can i add an item to a Multi-Value-List of an existing User Parameter in Inventor2012 (Accessing API with Visual Basic) ?
My idea is for example:
uParams.Item(i).ExpressionList.AddItem(As String)
The problem is, that such a function "AddItem" doesn't exist.
I can't seem to figure out a simple/direct method to identify the index of the selected item in a list box.
I feel like I'm missing something, but I can't seem to figure which (if any) property returns an index number if you use it with the .onChange callback for a ListBox.
The following code accomplishes what I need but isn't particularly efficient or elegant and can get muddled if you introduce multiple lists to check.
Any way to duplicate this same behavior with better code
var res = "palette {text: 'Example List', properties:{resizeable:true}
pnl: Panel{orientation: 'row',preferredSize: [400,600],
list1: ListBox{preferredSize: [400,550], properties:{multiselect:true,numberOfColumns:2, showHeaders:true,columnTitles: ['List 1', 'Subitem 0']}},
}}"
[Code]...
I have some blocks (different exit signs) in a drawing. I want to make a table or excel sheet that sums up the number of equal blocks in the drawing. How can i make this?
I want to connect this tabel to excel 2010.
I use AutoCad LT 2012.
I have a list -
(setq List1 (list "Line A" "Line B" "Line C"))
I would like to add each item in an existing list to a new list -
(setq ListNew (list "This is some text" "This is more text"
the following is the part I can't figure out - it just adds the list to the list, not the individual items
(mapcar '(lambda (x) x) List1)))
I am looking for ListNew to be - (a list with 5 strings)
"This is some text"
"This is more text"
"Line A"
"Line B"
"Line C"
I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
View 2 Replies View RelatedIs there a way to modify the DEFAULT SCALE LIST to show a metric scale list in an imperial template? I mean, I start a drawing using the imperial template, but i want to use the standard metric scales on paper space. on previous versions the scale list shown both imperial & metric. Now it depends of what the template is using.
View 1 Replies View RelatedHow to I simplify the list of file types in the Save-As file type list? I use less than six file types. I have no need for most of these. It would be nice to have my top 5 and then the ability to go off-menu if needed for others.
View 6 Replies View RelatedIs it normal behavior? I would like to use it in my script but now I'm afraid to use it.
View 3 Replies View RelatedI'm in a multi office environment with a network, I'm the only staff person with CS6 and all our CS5.x users have been getting errors opening CS6 files despite me having file compatibility set to "Always":
"The document contains unknown data which will be discarded to keep layers editable."Warnings about missing "color books" even though I don't use PANTONE"Could not complete your request because the file is not compatible with this version of Photoshop"..I just chatted with Adobe and after a long session here were their non-answers:
"There is a lot of features in CS6 that will not work on CS5 and we will not be able opening the CS 6 image in CS5." "You can disable the Third Party Plug-ins" (I'm not using any) So let's start our own list of KNOWN ISSUES with Photoshop version compatibilty
CS6 vector strokes. Any file I send with the new vector strokes can not be opened by CS5.x usersIt seems if I flatten all shape layers and smart objects, however our PSDS have hundreds of layers and even with the new search feature this is tedious. Plus you get into having two versions of a final file floating around which is a liability.
I have windows 7 and 2006 LT but my printer does not appear in the printer list in autocad.
View 3 Replies View Relatedi am using autocad LT 2010 and i need to get a list of all the name of the blocks used and the quantities of them from a drawing. I cannot used Bcount, eattext as they just return an uknown command,
Also i dont want to use qselect as i have about mutlples of 40 different blocks and i dont want to be qselecting 40 times.
Does anyone have a concise list of photoshop shortcuts?
View 2 Replies View RelatedIs there a list of shortcut key combos?
View 6 Replies View RelatedI'm looking for a list that describes the various key commands Photoshop employs. You know, like "V" is for the Move Tool, "L" is for the Lasso Tool, etc.
View 1 Replies View Relatedhow to do a bulleted list in Photoshop 6? So that the second line of text in a bullet lines up where it is supposed to without having to put extra spaces in?
View 2 Replies View Related1) I have a copy of a PSD file in which it has a combo box with a descriptive text embedded in it. Is there a tool in photoshop (like in MS Access, etc) that I can use to create the said button? I would like to replace the combo box with email address and password. Do I have to manually/use Photoshop to edit?
2) Since it is in PSD and have to convert it HTML later, any suggestion on how can I make the combo box functional after slicing the image in ImageReady.
Is there a way of changing the way the 3ds max lists the exporters in the drop down box. The exporter currently lists FBX as the first on the list, but would like to change that our custom exporter.
From 3d Studio R4 through to 3ds Max 2008
Windows XP (SP3)
Intel i7 CPU, 3.1 GHz, 3.50 GB RAM
ATI Radeon HD 5500 series, DX 9.0c
Coffee: Almost empty