i am using autocad LT 2010 and i need to get a list of all the name of the blocks used and the quantities of them from a drawing. I cannot used Bcount, eattext as they just return an uknown command,
Also i dont want to use qselect as i have about mutlples of 40 different blocks and i dont want to be qselecting 40 times.
I have a program that plots all blocks to png - open a dwg, get a list of all blocks, insert each into an empty dwg, zoom extents, and plot using the OOTB PublishToWeb PNG.pc3. In the attachments is an example of the problem. When I do this manually from a layout, I get the correct image. When I plot from code using the same PC3 file, draworder is being ignored.
It works if I apply transparency to the block and use ps.PlotTransparency = True, but I would prefer not to have to tell the user to change the block definitions. Is there a plotsettings property I am missing?
I would like to make a list on my drawing of my blocks. Not with part reference. How do I do that?
View 9 Replies View Relatedwe have created a large number of blocks out on our network and are continuously adding to them. A good way to provide a list or thumbnails of available blocks without having to create a drawing with all the blocks inserted to it. i just need to be able to communicate all available blocks to new hires, engineers, etc.
View 6 Replies View RelatedI have a drawing with a bunch of blocks. the blocks repeat themselves, but I need to define different attributes to each one of them and then being able to extraxt a list that I can read in excel.
View 7 Replies View RelatedI'm new to .net for autocad, but very familiar with c#. I studied some samples about creating a block from c#. I have a form for some basic input. When the user presses OK the code checks if the blockname is already in use. When no it creates the block using following
private void make_block() { double nextpoint = 0.0; double linedis = 7.3634; Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; using (Transaction tr = db.TransactionManager.StartTransaction()) {
[code]......
The code runs successfully (meaning i don't get any errors), but when I want to insert the block it isn't in the list of blocks.
I am trying to add a list of External References to MTEXT. The diesel expression $(xrefs) works fine within RTEXT but when I enter it into MTEXT the result shows "$(XREFS)??
View 2 Replies View RelatedThe standard AutoCAD Find & Replace dialog doesn't seem to work on a dynamic block's visibility states. I have quite a few blocks with 8-10 visibilities in each one that I need to change.
View 3 Replies View RelatedI am looking for a way to create a master list of construction notes then use blocks attributes with fields to link to that master list. That way if the master list changed the note bubbles would change as well.
Sheet sets are being used with this project but I can't think of a way to make it work with the existing sheet set technology.
I have some blocks (different exit signs) in a drawing. I want to make a table or excel sheet that sums up the number of equal blocks in the drawing. How can i make this?
I want to connect this tabel to excel 2010.
I use AutoCad LT 2012.
I have a list -
(setq List1 (list "Line A" "Line B" "Line C"))
I would like to add each item in an existing list to a new list -
(setq ListNew (list "This is some text" "This is more text"
the following is the part I can't figure out - it just adds the list to the list, not the individual items
(mapcar '(lambda (x) x) List1)))
I am looking for ListNew to be - (a list with 5 strings)
"This is some text"
"This is more text"
"Line A"
"Line B"
"Line C"
(defun CELBLKS ( / e blk ss blkl)
(setq blkl "" ss (ssadd))
(while (setq e (entsel "
[Code]....
i have this lsp, it works great but how can modify it if i want select with a window.? exemple: if i have 3 differentes blocks, i want to select them with windows and the lisp select all blocks that are identical of those 3.?
We have a new title block which now contains various fields to automatically populate the drawing number, number of sheets, issue etc. The problem we have is when we go to zoom all or extents on a layout tab it moves the layout to the right each time. If we only have one layout or we use a plain title block i.e. with no fields, the zoom works fine (layout stays put in the center). This is also true if we directly insert a field onto the layout - again no problems.
The cause of the problem only happens when a block containing a field is inserted onto the paper space of a layout and,there are multiple layouts containing blocks with fields.
How to find no of times specific blocks used in a drawing?
View 9 Replies View RelatedHow do I manipulate a height parameter all of the dynamic blocks in the drawing from one single field? Say a field located in the drawing properties or on the drawing itself.
For example: Multiple blocks of different walls of same height with other blocks of things on located on those walls, dependant on the wall height, all linked to and changed by a single field. Possibly a Wall Height field located in the custom tab of the drawing properties.
I can pickout each of the blocks and change them at the same time in properites menu because they all share the same parameter name. I would just like to have that height parameter of every block in the drawing, that has that specific parameter controled by a single field. Which I could enter a new height at anytime that would change every block in the drawing to that height.
We used a bespoke program to convert our drawings to Java applets for web usage. This does not cope with dynamic blocks at present and we have started to receive drawings from our clients using them.
I need to replace this with standard static blocks based on one of two criteria. Either:
1) Replace based on visibility state (have generic chair block with multiple different chair types set by visibility type, need to replace depending on which type it is set as)
2) Replace based on parameter (have table with size set by dimensions, need to replace with static block for each dimension)
I have over 100 blocks that I need to add the exact same objects and visibility state to. Is there a way to globally make this change, or even to copy the visibility states from one block to the next without having to recreate the states in each block? I thought I had previously run across a routine on here that would make changes to multiple blocks at once, but I can't seem to find it now.
View 1 Replies View RelatedI have a project in 3D that I would like to export to Stadd. This requires lines rather than blocks. Is is possible to convert the blocks in the attached dwg file to to lines that are centered on those blocks?
View 9 Replies View RelatedThe AttSync command does what it advertises fairly well. My problem is that I have thousands of small blocks in a single drawing. (My current drawing has 2100 block references with four attributes in each one.) I may change the attribute values in a few of them and need to re-sync the attribute locations. When I run AttSync it updates every single block insertion. One of two things are desired:
1)Flag each block insertion as having been sync'ed, reducing the number of objects requiring synchronization when AttSync is called again. Provide a way to force all to be sync'ed.
2)Allow a selection set in the AttSync command after selecting the block to sync.
Either or both of these would a great time-saver for those of us with large numbers of blocks with attributes.
I built a building foundation for a grading plan and I have another building that is the exact mirror of it. I have tried to mirror it. Didn't work. I created a block of the feature lines and inserted it with a -1 x value but I can't explode it. I tried the regular explode and xplode. Neither worked. I can use the the block to draw feature lines over but it just seems so much easier if I could figure out how to explode the block.
C3D 2013
I have the same block repeated multiple times in a drawing, and I want to delete the last attribute in all of the specific blocks. When I edit the block in block editor, the attributes do not show up. After I explode the block, there is no text. The attached image shows the properties of the block.
View 9 Replies View RelatedI am using AutoCAD 2013 on Windows 7 platform
95% of the blocks on the palettes have the images associated, and named, per the block name.
I have 48 blocks that the images are named like this "Block tool_F2149212-4649-41F5-95E6-4A978EC376F5_2".
I have tried resaving the blocks and recreating the blocks to no avail.
How to get these few blocks to have images that are associated with the actual block name and not the generic "block_too" name?
Is there a way to modify the DEFAULT SCALE LIST to show a metric scale list in an imperial template? I mean, I start a drawing using the imperial template, but i want to use the standard metric scales on paper space. on previous versions the scale list shown both imperial & metric. Now it depends of what the template is using.
View 1 Replies View RelatedI am trying to update blocks for a client. Each block has a line of text with the block name in it. I would like to automate these with a field so that if the block name changes or a new block is created from that one, then the field would update as well. I am running AutoCAD LT 2012 currently.
View 8 Replies View RelatedI wish to have a single dimension alter the dimensions in a set of nested blocks, similar to shared parameters in Revit. For example, I have a circle that has a fixed diameter that I wish to control in all blocks. I have set the diameter to barDia so now I wish to manipulate the dimension from outside the block.
Am I able to share the parameter across all the blocks?
I was trying to alter the standard blocks on the tool palette. How I messed everything up but I basically have two huge problems now.
1. I am missing the necessary default blocks that should be under my edit block directory.....all the Aecb files.
2. Now when I try and put in a receptacle or any other standard block a triangle with an exclamation point shows up upon insertion.
I attached a picture of the "edit block definition" and the troubled symbols.
I received a file that has a large number of blocks with unnamed blocks inside. I need them all to be by layer, and i really don't want to explode it.
How can I can do it?
I have been working on a drawing with 3 different dynamic blocks for several weeks and everything has been working perfectly. However, all of a sudden this afternoon, the text in all 3 dynamic blocks disappeared and will not display on the screen in paper or model space, and does not print.
As best I recall, I was creating a polyline viewport when this text disappeared.
I cannot turn the text on in these dynamic blocks. The text in on layer 0 which is on, and is unlocked and unfrozen. Additionally I have turned on, unlocked and unfroze all layers in the dwg and this does not work. I have also checked the text layer in the block editor and it is on layer 0.
When I click on any of the blocks, all the information appears to be correct, ie: door numbers, text style, etc. The text, however, just does not appear. Also I have never set any invisible text parameters and when I open the block editor, nothing in the invisible text area is selected or select-able.
Previous versions of this drawing, which I saved yesterday, display all block text perfectly. Perhaps there is a setting I accidentally hit which caused this problem?
I have tried repeatedly turning on all the layers, unfreezing, unlocking, changing parameters in the Style menu. I closed Autocad and turned the computer completely off and back on again.
how can i separate same type of blocks in dynamic blocks? all layers are same..
View 9 Replies View RelatedI want to create some symbols which includes text. For example, I have a square with an "F" centered within the square. The problem I am having is when I insert the block into a drawing and rotate it, the "F" also rotates. Is there any way to make it so the "F" is always horizontal no matter how I rotate the block?
View 2 Replies View RelatedI've just started to learn how to use Annotative Blocks and i'm running into what is probably a very simple problem. I'm creating a block and want to assign annotative scales to it. Once created, I insert the block into the drawing I need to use it in, and the only scale that shows up is the scale that is active when inserted.
All the other scales I added when creating the block are gone and I then have to assign the scales to the block again. I would prefer not to have to manually assign the scales every time the block in inserted into a drawing.