3ds Max :: Light Leaking Through Object?
Jul 8, 2011
I have an area omni between the cylinder (which is a tube primitive actually) and a box (primitive also, so it shouldnt be a face normal problem), and the light is passing through the box??! see pic
Shadows are enabled (raytracing), I'm surpised because I'm not new at max and 3D.
View 8 Replies
ADVERTISEMENT
Oct 12, 2013
I'm sure everyone has seen this in some form or another, beit in a movie, video game, or in real life; An object in the dark being silhouetted against a bright light and light seems to leak from around the object in rays along its edge. What this phenomenon is called, and even if you don't, how to recreate the effect in GIMP?
View 1 Replies
View Related
Jul 24, 2012
I have a routine that runs a cycle through 36 large dynamic blocks, then finishes. Somewhere in this code I'm either leaking memory, running a never ending loop, or AutoCAD gets stuck on something. I have a 12gb machine, and this file only uses a few MB on the hard drive. So even after I save and close the file, AutoCAD is using 100% of 1 core CPU (4 core i7) in 0 drawing state stuck at 11gb of Memory (Private Working Set). So, What is this program doing in 0 drawing state, and how is my code responsible? I have to kill it with task manager.
<CommandMethod("SetCurveOffset")> _ Public Shared Sub SetCurveOffset() Try Dim doc As Document = AApplication.DocumentManager.MdiActiveDocument Dim db As Database = doc.Database Using lock As DocumentLock = doc.LockDocument() Using trans As Transaction = db.TransactionManager.StartTransaction Dim bt As BlockTable = trans.GetObject(db.BlockTableId, OpenMode.ForRead) Dim btrModelSpace As BlockTableRecord = trans.GetObject(bt(BlockTableRecord.ModelSpace), OpenMode.ForWrite) Dim curves As New List(Of
[code]..........
View 9 Replies
View Related
May 25, 2012
Is it possible to affix a point light to an object so it moves with it when you move the object? I know you can simply select both and move 'em together. But I made a fixture with a lot of point lights on it and it's a pain in the ass to try to select everything in order to move it and position it.
View 2 Replies
View Related
Feb 9, 2013
Since I'm from Photoshop and they have lighting effects, I'm wondering if I can make a light focus on one direct object, and the surrounding objects are blackened out a bit.
Link me to a plugin.
View 1 Replies
View Related
Oct 24, 2011
If it is possible to replace objects in a scene with light objects. The normal replace function in the import menu will only replace normal mesh objects with other mesh objects. But if I try the same by replacing box objects in my scene with the light source object I saved in a separate max file, it says it doesn't find any objects in the max file with the same name despite it having the exact same name. (both objects in question have all lower case letters in the name)
I'm currently using Max 10 to render lightmaps for a first person shooter game and I use various scripts to get the game content into the scene. The game also provides object positions for glow objects which are in positions I intend to use for light sources. Normally I go through a long tedious process of cloning light objects and positioning roughly in the same area where the glow objects are. (objects I decide not to replace with the game's object meshes appear as standard box objects in max unless I convert them to mesh objects).
But I would like to create a set of light objects and do a batch replace on some objects already in the scene with my light objects. This would save me a lot of time. Is there a function max that can do this or is there a script that can do this?
View 2 Replies
View Related
Nov 26, 2013
I am working on a sign which needs to be backlit. I cant seem to get the light to interact with the shape in front. I need the light to spread across the shape, basically between the wall and the oval shape.
View 2 Replies
View Related
Jan 27, 2014
Is there a way to have a light effect only one selected object in action? I'm trying to light some text.
View 2 Replies
View Related
Mar 13, 2011
I've tried to use it, but how to generate the flashing light in a separate object. This is possible because while trying I did it, but now I cannot do it and it does the flashing light in the same layer of the background of the image.
View 2 Replies
View Related
Feb 14, 2011
I am trying to animate a casino-like light board made of tens of light bulbs/leds. I thought the easiest way to do it would be creating a matrix of bulbs arranged by material ID and then design a pattern in multi sub-object materiel so I could somehow scrub through it and achieve animation effect. The material modifier allows to change ID for the whole object only and MaterialByElement shuffle ID`s in a random manner.
[URL]
View 3 Replies
View Related
Apr 7, 2011
I am attempting to build a facsimilie enigma machine, I would like to know how best to create an effect so that when a key is pressed a corresponding letter appears to light up. Btw I am not looking for an animated image, I can take care of the transitions between on and off, I just need to create the two image states.
Attached Thumbnails
View 2 Replies
View Related
Oct 26, 2012
How do you lock the pivot point of a light to the light itself? I thought just adding a Axis node would move the light and pivot point but the pivot does not move. Is there a way of parenting them together?
View 2 Replies
View Related
Dec 6, 2010
How do I use the standard Revit can lights in a wood joist floor with drywall applied to the bottom? If I place in a suspended ceiling, can lights light up just fine. However, if I use them in the floor space of a wood joist floor, the light itself gets covered with the floor. How can I get the light to cut the floor out so I can see the light when it is rendered?
View 4 Replies
View Related
Nov 26, 2012
by download I received CS6 (download version, not by disk).after installation I tryed in a photo to put an object into a spotlight.in the menu filter, rendering you can activate clouds etc, also lighteffects, but in my version the tab lighteffects is coloured in grey (not active)how can I get this thing started?
View 18 Replies
View Related
Dec 12, 2012
i wondering how to add light to an image something like this glossy light stuff on the girl
View 3 Replies
View Related
Nov 19, 2008
A long long time ago I saw a tutorial on a site that has disappeared it was called 'Ray of Light 2' on www.fundy.net. Now I have gone looking for the tutorial again and cannot find it anywhere unfortunately.
So on that note I was wondering if anybody knew of some good techniques or tutorial to create a light burst behind text/shapes. Now being the awkward git that I am heehee, I am looking for something as realistic as possible.
View 3 Replies
View Related
Aug 17, 2004
Any tips on creating a beam of white light going from point a to point b?
View 9 Replies
View Related
Mar 28, 2005
how you can have the transparentish writing effect on some picture as shown as the example that i have here ...
View 4 Replies
View Related
Mar 14, 2006
I looked at the picture but I saw the right of the picture is darker than left . Which tool do I use to darken it or lighten?
View 6 Replies
View Related
Jul 1, 2008
how are these things done? Those pretty rays of super bright light behind an object. Been looking for tute but cant find something that can explain step by step.
View 2 Replies
View Related
Nov 19, 2006
I have really eager to know how the following effect is achieved. I've seen it done a few times and i know its not too hard to achieve.
View 9 Replies
View Related
Mar 8, 2008
I made a mistake and took a picture on the sun. I checked out the picture on PS but my face is too light. I tried everything but nothing.
View 4 Replies
View Related
Mar 24, 2004
I opened up PS ,havnt used it too active lately and started to experiment a little. Anyway here's the thing i created but i got a little problem, the light source on the green part( as u see i tried to do something), i cant get it right, i want it as it would be shiny.BUT i cant get it to my mind where it should be (to right,left,up and down?) i made it with pen path and the colored it white and then reduced the opacity,if there is another way to get it ,tell me that too, but at least i would be very grateful if someone could tell me where it should be,coz i aint got an "eye" to see where it should come(maybe u would have to be more of an artsit than me to see it )
View 2 Replies
View Related
Nov 24, 2007
how to create this light sabre effect in photoshop.
View 3 Replies
View Related
Dec 3, 2008
could someone help me fix it so the lighting is nice and normal? There is so much glare from the light.
View 3 Replies
View Related
Mar 22, 2003
been trying to make use of the Filter/Render/Lighting Effects and just realized the Default Style setting is missing...blank...empty
View 3 Replies
View Related
Aug 19, 2004
How do i get the effect of an illuminating light? sort of a GLORIOUS/VICTORIOUS lighting effect. (like some of the scenes or screen shots of the characters from "Lord of the Rings III")
I'm hoping to achieve that effect for the photos that i'm editing.
View 9 Replies
View Related
Sep 25, 2005
I want to make this in cs2
I will NOT be using a background image. All I want is the text & the light flare thing going over it.
View 1 Replies
View Related
Nov 25, 2006
where i can download the full pack of them textures?
View 3 Replies
View Related
Jun 12, 2004
I just saw a concert on television (A-Ha in Norway). The stage was bathed in blue and there were these very intense green stage lights with 6 point light effects to the (I'm not sure what you call them, but they are like you see on Christmas cards or when using certain camera filters.)
How can I create this effect in PS?
View 4 Replies
View Related
May 2, 2008
I'm trying to add a little accent light to my background to improve the separation between the background and the model. I tried using the render spotlight tool which added the light where I wanted it but it turned the rest of the background black. Is there a way to add light to the areas of the layer without changeing the rest of the layer?
View 1 Replies
View Related