3ds Max :: Editing Mesh Vertices While UVW Mapping Window Is Open?
Sep 9, 2011
this is a question regarding UVW and vertex editing. When you choose unwrap UVW map and the window opens so you can edit the UVW map, you can select vertices of the mesh on the viewport and see which one is which one on the UVW map, but you cant move them. I want to be able to select vertices on the UVW map so i can identify them on the viewport and move them there but i dont know how. Is it even possible? i have tried everything but as soon as i choose to edit mesh vertices the uvw map window closes and if i try to move a vertex of the mesh while the uvw window is open i just cant.
View 2 Replies
ADVERTISEMENT
Feb 9, 2013
I have created an envelope mesh over a photograph of a face and I wish to map a pattern onto the mesh so it looks like a face. (none of the original photographed face needs be visible).
View 3 Replies
View Related
Oct 20, 2012
I'm using Maya 2013 and I can't find "Edit Mesh" at the top of the window. I've found this page (
[URL]......
but it refers to Maya 2012. The second problem is:
I'm trying to put an image on the cylinder-surface. I've found a youtube-video (added bellow) which says I have to click on "Cylindrical Mapping" after making a "blinn2" (and so on).
But when I click on "Cylindrical Mapping" nothing happens. There isn't even an error message.
View 1 Replies
View Related
Feb 13, 2013
I want to create a mesh, then have small spheres attached to all of the vertices, then I want to control the size of the spheres, have them different sizes across the mesh.
Would also like to know how to keep the spheres attached to the vertices as the shape of the mesh deforms/animates.
View 8 Replies
View Related
Feb 15, 2011
I have a simple Loft compound object with a single straight line using 5 instances of a shape, all rotating by a certain degree. I now need to animate the rotation of one of the shapes however when I try this, no keys are created when I rotate it.
Is this only possible by collapsing the loft and editing the vertices?
3DS Max Design 2013 x64
Windows7 x64
View 1 Replies
View Related
Mar 11, 2011
Is there any way for editing more then one meshes at a time? For example: I want to extrude, bevel, connect components of my two cubes at the same time.
View 2 Replies
View Related
Dec 7, 2011
When I go to edit mesh on a brand new hedra and take two points and scale them, the sides are uneven, one side isn't scaling properly. It looks to be the one with the square edge. Here's a video.
[URL].........
View 1 Replies
View Related
Jan 21, 2012
When press "open" the "open"-window dosn't open. Insted it open a comandpromt by the cursor that promt me to enter full search-way and name on the file I want to open.
What can i do to get the "open"-window?
View 2 Replies
View Related
Jun 28, 2009
I just installed Service Pack 2 in my Vista Ultimate 32bit operating system. After the install I opened PS, CS4 and at first every thing looked ok. I then opened an image file, it came up in RAW, I made initial adjustments, and clicked on open image. The image shows in the Navigator window, but there's nothing in the main editing window. It remains blank. If open another window like my browser over PS, and move that window around it leaves a partial image of the browser on top of the image editing window. I had been using Photoshop just prior to installing SP2 and everything was working ok.
View 2 Replies
View Related
Nov 2, 2011
I edited the project-properties to HD, according to the hints Trevor gave in this topic:
[URL]
As a work-round----Change the project properties to use 1920 x 1080 and your images will be 1920 x 1080.
Settings-Project Properties (Alt+Enter)
Edit File Format ---Microsoft Avi Files
Edit
Avi Tab
Compression to Microsoft Video 1 (there may be others you can use—Div X ??)
General Tab
Frame Size---User Defined to 1920 x 1080
Ok now the screen shots should all use the larger image size.
View 1 Replies
View Related
Jul 1, 2012
I've got a problem with basic image editing in GIMP.The screenshots should give understanding. I have GIMP 2.6 on Windows 7.GIMP wont allow me to move anything around in the darker area of this image("IconOverlay.png" - attached).
I've tried reinstalling GIMP as well as deleting the user preferencesfolder. I've also tried copying the image into a new GIMP window and editing it inthat, but it doesn't work. This has never happened before on any other image I've edited.
View 3 Replies
View Related
Mar 18, 2013
I open a 3D file imported from the 3ds Max in the AutoCAD but when it opened in the AutoCAD, it full of meshes.
How to open/import a 3D file from 3ds Max to the AutoCAD so that it not as a mesh and it's a solid?
View 3 Replies
View Related
Jan 8, 2014
I am ready to do some multicamera editing but cannot find my mutilcamera monitor in my window menu?
View 1 Replies
View Related
Dec 18, 2013
Info:
OS: Windows 7 Pro
CPU: AMD FX-8350 @4.2ghz
GPU: Nvidia Quadro K4000
Monitors: Dual Asus 24" 1920x1080
Memory: 16gb
GPU Control Panel: Nvidia Version 331.65 for Quadro K4000
Autodesk Platform: Product Design Suite 2014
When I section a view and edit the hatches, the 'Edit Hatch Pattern' window always opens off-screen. Â I have changed the settings in the GPU control panel to have everything open on the last window, but this window will not abide. Â I move the window to the Inventor window (monitor 2), but it will re-open back to monitor 1 in the exact same position every time.
The 'Edit Hatch Pattern' window seems to be the only window that does this in Inventor. Â Attached is a screen cap of the issue. Â The window opens in the same place each time.
OS: Windows 7 Pro
CPU: AMD FX-8350 @4.2ghz
GPU: Nvidia Quadro K4000
Monitors: Dual Asus 24" 1920x1080
Memory: 16gb
GPU Control Panel: Nvidia Version 331.65 for Quadro K4000
Autodesk Platform: Product Design Suite 2014
View 1 Replies
View Related
Sep 24, 2011
I am playing with a design in simulation where the balance is effected by gravity. I have a part at a set angle to start off so a constraint is place and set to this angle,then in simulation I suppress the angle prior to starting the simulation to see what happens. Then I unsuppress the angle then edit it to adjust the simulation to a new angle I then resupress the angle to free it up and run the simulation again.
This can go on a few times until the angle is found in the simulation.The problem I have is it takes ages to do this. Basically it seems in simulation the tree is always collapsed and I want it expanded, how ever after each change the tree collapses?
Is there a way to have the tree always expanded so I can quickly find and adjust my constraint? Or even better is there a way to pull the constraint into the main edit window for direct editing?
It would be good if a small bow / window could be opened with the ability to add a setting/constraignt that needs constant updating.
View 2 Replies
View Related
Jan 16, 2013
I have purchased some clipart where the artist used Adobe Illustrator and it contained extensive Mesh Fills. The artist sent me the same artwork in pdf & eps but I am unable to open any of them with X5. Apparently it is a function of the mesh fills?
View 4 Replies
View Related
Apr 9, 2012
I have an assembly that has somewhere a hole with a round bar that exactly fits in this hole. But when meshing the assembly, the mesh of the hole and the mesh of the bar are different.
The result is that the different parts do only seem to touch each other at the edges of the mesh, resulting in high stresses.
See picture.
I tried to made a derived part from the assembly, but that one does not finish meshing. After 48 hours, the progress bar is still half way. While the one above did finish in about 15 minutes. What can I do to make the meshes match?
View 1 Replies
View Related
Dec 4, 2011
I thought they were supposed to appear when the Polygon shelf is selected? I don't see them. In fact, when I select different shelves the menu items on the right half of the task bar don't change at all. Is this normal?
This is Maya 2011 on Mac OS X Lion.
View 3 Replies
View Related
Oct 10, 2013
Photoshop always starts with opening a window (grey) at startup or when closed en re-opened. How can I close this window permanently so that i can see my desktop when closing last Photoshop picture (window).
View 2 Replies
View Related
Jul 28, 2012
I am trying to colourise a video, so I open the animation window, open a colour layer, and colour the scene. When I drag the 'Current Time Indicator', the video moves, but the colour layer (naturally) doesn't. What I do is shorten the green line on the animation window for the colour layer, duplicate the layer, re-position it on the animation window, and so on for all the frames.
What I would like to know is, is there an easier way to do this? Is there anyway I can do this without using so many layers, or edit the one colour layer, and have changes on one frame, but not on the other, with the same layer being used?
View 2 Replies
View Related
Aug 11, 2009
When you go to save or open something in photoshop, I'd like to edit the "shortcuts" that are on the left hand side of the window (Recent Places, Desktop, User Directory, Computer, Network). I've altered those shortcuts in vista windows and would like to do the same for photoshop. I know that in OSX you're able to tell photoshop to use the operating system's window rather than photoshop's, is this possible on windows?
View 2 Replies
View Related
Mar 1, 2012
How i can open Autocad Insert window using .net code using API.
View 2 Replies
View Related
Mar 18, 2011
I closed the color window and now I don't know how to open it again. How?
View 1 Replies
View Related
Jun 23, 2011
I have a document with three layers, nothing fancy. I want to make one of the layers bigger. The docs say use the selection tool (in my case the rectangle tool) to make a selection. They say if you want to resize the selection just grab on of the handles. This works as it should. However I want to resize my layer, which is essentially a square image. I can't see where to do this. The layer properties don't even show the size of my layer. Is there some way to open the layer in another window?
View 2 Replies
View Related
Oct 14, 2012
This is my first time using this program, and I accidentally closed the 'layers' window that shows the layers and lets you move them around. I can't find where to open it again.
View 1 Replies
View Related
Sep 26, 2013
Pathfinder window does not open
View 1 Replies
View Related
Jul 19, 2012
When I go to save the project I'm working on and click the Save As button, the Save Window does not open?
I am running the 30 Day Trial Version on Windows 7.
View 3 Replies
View Related
Apr 6, 2012
Why is there a default empty window when you open the app on Mac? All previous versions let you view your desktop if you don't have an open project. Is there a preference setting to get rid of this?
View 4 Replies
View Related
Apr 20, 2012
I recently installed / upgraded to CS5.1, set up all my preferences, keyboard shortcuts, presets, plugins. All worked fine, day in - day out, for the last three weeks. About three days ago this anomaly appeared...
Â
When I zoom in (cmd +/), the window will resize, but only part way. The window will move over flush right on the monitor, but leave about one inch of space between the window and the left side of the monitor, and increase in size until it fits aprox 2/3rds of the monitor / screen. It stops enlarging and leaves about 3 inches of space between the window and the bottom of the screen. At that point I get scroll bars. So I end up with a much smaller window to work in.
I can grab the bottom right corner of the window, pull it open to fill the screen, but as soon as I go to zoom in or out, the window jumps back to the smaller size with the gap on the left side and bottom.
Option bar is "Standard Screen Mode"
All my pallets are on a separate monitor, so nothing else is on my main monitor that would limit the size of my window as I zoom in.
My preferences are set to:
• Zoom Resizes Windows
• Enable Flick Panning (works fine)
• Animated Zoom
OS 10.5x
10GB ram
Â
I don't know if I inadvertently changed something to cause this.
View 10 Replies
View Related
Jul 22, 2012
I've been using CS2 Photoshop 9 for some time on an iMac running 10.4.11. all of a sudden, the Layers window will not stay open. It'll open with F7 but as soon as I click on the image I'm working on, the Layers window closes! All the other windows seem to work OK. Did I mistakenly hit something to cause this to happen? It's almost like an automatic window closer.
View 5 Replies
View Related
Dec 17, 2012
i have photoshop CS6 in a mac os x operative system and when i drag one image from the tabs to make it as a floating window in order to keep that image as a reference for the painting that i am working on, that floating window disappears behind my PS CS6 window like if it was part of another program when i click out of it, why is this happening.
I want to keep that floating window open all the time by the file that i working on.
View 2 Replies
View Related
