I model a character and apply piped and envelope it, then half the time when I want ot give it footsteps from the motion panel, the option simply doesn't highlight and I can't press the button. I follow the same procedure for another character and it works. It works every time for a Biped without a mesh though, but with mesh its a matter of chance.
View 1 Replies
I have a completed, weighted character mesh, now I want to add a little bone under the arm to move the back very little. When I use the "Add Influence" option - I've tried every setting.It puts a lot of extreme weighting on this little bone and ruins my weighting in the arms, shoulders, back, etc.
How to add this new joint into the influence of the mesh with just the bare minimum of weight, so I can slowly, gently Paint Weights onto it and carefully grow its influence in a small area?
I made myself a graphic, currently it is black and white, and I would like to add colour to it. Now when I want to go to (Image > Adjustments > Hue/Saturation) it is inactive, meaning I can't click on it. Well I can click but nothing comes up of course.
View 1 Replies View RelatedI created a vector mask, selected the area I wanted to work with, previewed it as I was refining my shape. It was all fine. However, I am not sure what I did that now both the inside and outside of the shape are greyed out and I can no longer see my vector mask as I orignally saw it. I am not sure if there is something I can do to have my vector mask again.
View 3 Replies View Relatedsince today the import button of my lightroom 3.6 is inactive. don't know what happened. i installed a plugin but even after installing it, the button's still inactive.
View 3 Replies View RelatedI opened Photoshop just now and found out that, while using pen tool, the Stroke color & its size isn't working at all. I cannot select them, even hovering don't work at all. It's totally inactive. Yesterday it's working fine, but today it's not.
View 8 Replies View RelatedI have done something to my X5 or X4 document that has disabled the ability to publish to PDF. What I could have done that would have disabled this? I just have text and graphics, on a poster sized document. it is one page.
View 2 Replies View Relatedusing CS2 on Windows XP. sometimes when i apply a filter, when i exit the filter dialogue - either OK or cancel - when i return to the picture, none of the tools work. space won't bring up the hand etc, and clciking on the Layer pallette, picture, anything, doesn't fix it. i manage to get stuff back by pressing every key in sight and swearing venomously at the machine,
View 1 Replies View RelatedAt random points while editing my keyboard will become inactive within Smoke. I've mapped out a custom keyboard and it works well to a certain point. It's as if I've accidentally changed a setting that "turned off" all my key maps. I can't zoom, insert or even playback from the source monitor or timeline.
View 5 Replies View RelatedHaving issue like loosing all of your shortcut keys in max? I have them all assigned in the Customize > Customize User Interface>Keyboard Tab but they are all inactive, forcing me to work like a snail with my left hand in my pocket. I've gone and checked for the shortcut files, done a RESET to max settings, Reloaded the UI, Restarted the computer, can't remember anything else I can to to sort it out.
Changing views (Top/Side/Left/Zooming) becomes painstakingly slow...
In my section view, Get Model Sketches is inactive (greyed out; see attached).
It was OK up until recently, but now it would not show any sketches no matter what I try to do.
I would hate to recreate the view again.
I need to close drawing file which is inactive. How i can achive same.
View 3 Replies View RelatedI would like to synchronize view in two open drawings in autocad.
If I change view or zoom or scroll mouse center button in one drawing, the second drawing needs to be updated in the same view simultaneously with view changed event in C# .
Now, I have lisp code to do the same manually. What the code does is that, when I enter command "V" in drawing-1
it will store viewsize and viewctr variable in a text file. when I enter command "VV" in drawing-2
it will read the viewsize and viewctr variable from the text file and execute in the command line. I tried the following code, It is not working.
This is my C# code
public class SimultaneousViewChange : IExtensionApplication
{
Document doc = Application.DocumentManager.MdiActiveDocument;
public void Initialize()
{
doc.ViewChanged += doc_ViewChanged;
[code]...
This is my lisp code.
;;;-------------------------------------------------------------------
;;; Store the current display size in a specified text file
;;;-------------------------------------------------------------------(defun c:V (/ viewsize viewctr file space) (setq viewsize (getvar 'viewsize)viewctr (getvar 'viewctr)space (getvar 'tilemode) ) (setq file (open "C:\Zoom Spot.txt" "w")) (write-line (rtos space) file) (write-line (rtos viewsize) file) (write-line (rtos (nth 0 viewctr)) file) (write-line (rtos (nth 1 viewctr)) file) (write-line (rtos (nth 2 viewctr)) file) (close file) (command "ucs" "p"));End
[code].....
I understand that CS Live is dead, but my Illustrator CS5 seems to be always "phoning home" and making my current document inactive until I click on the Illustrator desktop. This happens any time I pause using Illustrator for just a few minutes. Is this really a CS Live issue?Is there a setting that will keep my open Illustrator document from going inactive on me?
View 3 Replies View RelatedI am trying to use the Mesh Tool, but it appears to be inactive. The cursor looks like a cross with a small crossed circle nets to it (like a "do not pass" road sign). I do not know what I did wrong. In Preferences I have "Object selection by path only" deselected, so it can't be it.
View 10 Replies View Relatedhow to activate the text style in inventor 2013. I can change the text style on a new text in my drawing, but when I want to change a text style on an existing text, the syle is inactive.
View 9 Replies View Relatedtool-active-&-inactive.jpg
In coreldraw there should be a clear appearance of tool activeness like in attachment. Besides
if any command is keystoreked then the command is displayed and in the center so that user
can understand that the command is performed....
see the attachment as how the tool should be clearly appeared as active
I got this weird error on Civil 2012, I have been working with Civil products for a few years now and have never had this happen till today. Other co-workers have had the same problem which only started to occur yesterday.
The Error; Was working on a drawing with multiple layers, surfaces, alignments, assemblies, corridors, and of course point groups. The screen froze for about 2 seconds when I was attempting to hatch an object, after the quick freeze all my layers (each assigned different colors) turned on (visible) and changed color to white. Everything on the drawing became inactive except for the save button and the close button. So I saved it and closed the drawing, I had other drawings open at the same time and these were never affected (still had color and could work on them). Since the save button was still working I never lost any work that I had completed but it is still annoying having to close and open the drawing since larger drawings can take a few min to open.
Is this an Autocad issue or is it something with our machines/network?
Intel(R) Xeon(R) CPU @ 2.53 GHz
6 GB Ram
NVidia Quadro 600
64-bit Operating System
I am having trouble with copy paste . When I copy with base point, and try to paste all the paste options are inactive. is there a switch that I have off? What''s the fix.
View 4 Replies View RelatedI have read several Pen tool tutorials but haven't found anything about this:
If I draw a path with the pen tool and later want to reactivate it, clicking the last anchro point to make the path active severs one of its control handles. Specifically the handle that is for the curve that is yet to be drawn. And after that I have to use the Convert Anchor Point tool to recreate both control handles and try to math the already existing one to its former place.
How can I fix this?
I have an inactive snap shortcut menu. When clicking shift + right mouse button the menu appears but when I typet
"E" for "ENDpoint", "M" for "Midpoint" or when I just click over the respective icons in the menu nothing really happens and I get the following message in the command bar:
"Command: _endp Unknown command "ENDP". Press F1 for help."
or
"Command: _mid Unknown command "MID". Press F1 for help."
I tried following, none of which worked:
1. resetting the main customization file ACA_Global.cuix
2. switching between different profiles and cuix files
3. reinstalling Autocad Architecture 2013
4. uninstalling and Installing Autocad Architecture 2013 service pack 1
5. installing older versions of Autocad (2008 and Architecture 2012)
6. reinstalling Windows 7 and installing Autocad Architecture 2013 again
Where can I find feather option and smooth/refine edges option in Adobe Element 7.
View 1 Replies View RelatedAs you might see in layer panel. there is a blending option applying on text. and when i try to applying new blending option i-e drop shadow or inner shadow to layer shape 5. it will mess with also to text layer.
View 6 Replies View RelatedI cannot stand it when I make a new layer in Illustrator and the color hint becomes yellow. This usually happens on the third new layer into every project. I can go in and manually change it from yellow to the ten plus other colors, but I just want yellow completely out of the list. It's awful to look at, and I think every other color is easier.
View 5 Replies View RelatedI have some problems with Bolt Connection Component Generator. For placement I choose Concentric, i choose all references, but I can't select Diameter. It is stuck to 10mm and i can't change it.
I am using Inventor Profesional 2013
I'm having this strange issue with the Photoshop type tool in Photoshop CS5. It might be, although I'm not sure, a bug. The tool itself is working and lets me add text and edit. But the box that shows up when editing text (and the blinking line that shows where I am in the text) - has gone invisible. I am having this issue in only one document. - I tested the type tool on other documents, and everything was normal. I've looked up shotcuts and hotkeys to check if I've tapped a key or something, but it doesn't appear to be so.
Now about the document; it does have quite the amount of text layers, and a lot of text in them. I've tried resetting the type tool, and I've restarted the program.
When I restart the program, the tool works as it's supposed to - but after editing or adding a new text layer, the editing area is gone again! Is this a bug, or have I touched keys that do odd things?
I have rigged a character and made it into a character set in which i have locked the scaling attribute , I have then saved this file. I have then referenced this file and and have done a walk cycle animation and saved this file. I have then realised that I needed the scaling attribute when I have added other parts of my scene. Is there a way to unlock the scaling attribute in my walk cycle animation file or will i have to go back and change it in the rigged file, create a new character set and do the walk cycle animation again?
View 2 Replies View RelatedIn the timeline panel in CS6 EXTENDED, you have a video feature, where you can animate three things:
Position Style Opacity
What I would like to know, is: How can I animate rotation of a layer? I want to rotate my layer at an angle and animate it. But when I rotate, the first animation frame is also rotated, resulting in NO animation between the frames.
How do I remove the blues eye lines and text when creating a animation preview?
[URL]
My current scene has 10 animation layers for a character, and seeing every f-curve from all layers, although grey and locked, when I only need to see the f-curves in layer I'm working on is really cluttering the graph editor. My current work around is selecting my active layer in the Layer Editor every time I select a rig control. Simple enough, but a pretty inefficient way of working. I can't seem to find a setting that allows me to just see ONLY the fcurves in the active layer. I imagine some of you out there may have hundreds of animations for a single game character.
View 4 Replies View RelatedI'm trying to animate a moving rope based on simulation data. I know how to import my motion data for individual objects.I've seen lots of tutorials where one uses simulations or soft bodies with IK in order to create a rope. how to use all these features and I want the rope to follow my coordinates exactly. I was hoping I could do something like the following:
1. create points in Maya which correspond to my data points
2. connect the points with a curve
3. loft a circle using the curve as a path in order to make a rope
4. move the points. due to History, the rope position is updated
Is there a way to do something like this in Maya? I've tried, and it looks like ep points do not have key-able channel data, so I can't create animations for them separately. I'm using .mov data file imports to generate x, y, and z motion keys for the points.
