I am using the Bloc Theme from YooThemes for my webpage: [URL]....
I'm looking to fill in those 3 colors with three colors that I have designed myself.
I used the eyedropper to pick up colors from other files and tried to fill the shapes. No matter what I've done - even using the pen tool to close in the shape the fill goes all over the whole page.
When I fill in the colors how can I also keep the 3-D effect?
using PS CS. i have selected a circular area with the marquee tool on a transparent background and i want to fill that area with colour, using the paintbucket tool i attempt to fill area but what happens when i do this is it acts like a spray can does, dark colour in the centre fading aways towards the edges also it does not actually fill the selected area it's as if i have not selected it, but i have.
View 2 Replies View RelatedDoes the paintbucket require something specific in order to fill? I am drawing shapes with the pen tool but I can't fill them with the paintbucket. What am I missing and what are the alternatives? Is there a way to fill the pen-drawn shape with textures that will look like topography?
View 16 Replies View RelatedHow do I bucket fill the way Paint does, where it fills every thing of a similar color? (or every thing adjacent, I don't remember.) It keeps filling my entire canvas, instead of the area I want.
[URL]......
Is it possible to fill an area with content-aware using the paint bucket tool? i have been able to fill the exact area I would like to be replaced with a general swatch. perhaps it is possible to create a swatch which uses the content-aware filter?
View 5 Replies View RelatedFirst off, I am in RGB mode, with Photoshop Elements 6. I am trying to fill in an area of the business center (the building on the left) in my drawing but it is going over both the door lines and the text on the building. With the student center (the building on the right), it does the same with any of the grey lines (but not the text). And this is all under one layer (They used to be made up of multiple layers but were merged into one). What should I do? Here is a picture of it down below:
View 2 Replies View RelatedI have an image that has a white background but that darkens in the immediate neighborhood of the image in question. So I do a bucket fill (red) with the threshold of 15 that sets the entire white(ish) area to red. So far so good. But then when I switch to fill this red area to white with the same threshold, I find small pixels of red adjacent to the image. I don't see how that is happening since the first fill set the entire filled region to one color (red) and I would expect that the second fill would completely replace all red with my new color (white).
View 4 Replies View RelatedI have a PNG logo that has anti-aliased letters on a transparent background. In other words, all pixels are white (for example) and either 0% transparent (in the letters) or semi-transparent (in the anti-aliasing). The rest of the image is transparent.
What I'm trying to do is take change the color of the logo. Bucket fill in normal mode changes the alpha value of the semi-transparent pixels to 0% transparent when applying the color--so I loose the anti-aliasing. I did manage to get what I want with bucket fill mode Darken only, but this only works for certain colors on certain other colors (I can change white to any other color, but not vice versa).
Is there a straightforward way to fill a color while keeping the alpha channel intact? I tried all the modes, and also modifying the Fill transparent areas, but don't really understand them to figure out if one does this in the general case.
GIMP 2.8.6 on Window 8.I used Canvas Size to add a horizontal space at the bottom of a jpeg photo. (I want to use it for a text caption for the photo.) The new space is filled with a checkerboard of small light & dark grey squares.
I used the Rectangle Select Tool to select the new space.I clicked on the Bucket Fill Tool and moved the mouse over the new space. The mouse pointer includes a circle with a diagonal stroke through it, indicating I cannot fill the selected area.
Is there a simple way to create a "filled rectangle" in GIMP - without using the Bucket Fill Tool?
View 3 Replies View Relatedstep 1) I remove the background of my image with the color to alpha method, isolating the part of the image i want.
step 2) I then use color select tool to select all the transparent area that was left behind from step 1.
step 3) I create a new layer.
step 4) Then I use the bucket fill tool to fill in the area on the 2nd layer that was selected in step 2.
This is where I run into trouble. On some pixels where the color filling meets dotted line area (made by color select tool) the color comes out translucent. I don't want this to happen. I want it to be solid ff00ff (color hex) without the random reductions in opacity.
I'm working with sprites and the emulator i use has ff00ff as transparent. I'm getting random pink color coming out of the edges of my sprites. These little specks of pink should not be appearing in game because it is supposed to be read as transparent. i suspect that these specks coming out are related to these translucent hiccups made in gimp.
Win 7 64 bit
How can I use the bucket-fill option to fill an area surrounded by a dottedline?
The dotted line is a path; so if I use a line for the dots, the bucket-fillworks.
But how can I step back after filling to change the path's line into dotsagain?
Is it possible to create a shape, and just outline its shape..with no fill at all? So just the lines of the shape?
View 1 Replies View RelatedFor some reason, all of a sudden when I go to make a shape and choose a color, it does not fill. I noticed that the Style box to the right of the color box on the top bar had a white box with a red line through it. I then chose Simple Outer from the drop down box and it still will not fill. I am using Elements 10.
View 5 Replies View RelatedOn a new layer, I used the line and curve tools to draw the outline of a human figure. I want to fill the shape with a color. However, I can't figure out how to select the entire figure so that I can fill it using the Paint Bucket tool. How can I do that?
View 2 Replies View RelatedI am working on a graphic that has a circle with many small circles around it. All the circles are on seperate layers and were made with the shape tool. How can I change the color in all the small cicles at once? Isn't there a way to chage the attributes of multiple shapes at one time? I swear I saw this somewhere in my books but cannot find it now.
View 4 Replies View RelatedIn Illustrator CS4:
I need to fill 20 circles with one common grad fill... so that the 1st circle is dark to the 20th as lightest (NOT each individual circle getting it's own gradient).
I am recently getting back into using Illustrator.
I am trying to draw 2 shapes, let's say 2 circles, fill them w/colors, then have them overlap each other.
The part where they overlap creates a DIFFERENT shape. I want to fill that 3rd shapew/a different color. How do I select that 3rd shape area and fill out?
I'm trying to find the best way to fill a shape with other shapes( a with a specific size), without overlaping, like the example below.
My main concerns are the spacing between the circles, the positioning should be as paralel to the the outside shapes as possible, and the size of the circles ( or any other necessary shape).
I'm doing this by hand sometimes with 900 circles. is there a fast way to this? do you know any macro/plugin to make the task easier?
I am not a power user but have used CorelDraw since ver 8. My question is why I cannot fill shapes like the one provided whether I create them in Draw, or import them as dwg or dxf into Draw. It's interesting that I can fill this shape in DesignCad (the source of the dwg-dxf files) but not in Corel. Of course, the project I'm working on needs the other touches that Draw provides and DesignCad doesn't.
View 14 Replies View RelatedAny good technique for applying gradual, linear perspective to textures used to fill shapes? An example will make my question much clearer (the attached drawing, both in JPG and .XAR).
The top shape is a carpet (or something) with a bitmap fill applied. I want to draw it curled, as in the bottom shape--the texture doesn't follow the contour of the object (as expected, since this isn't a 3D modelling program).
But is there some way to simulate the gradual rotation and foreshortening of a texture, to make folds and curls in fabric look more realistic?
how to apply a mesh fill to an irregular object other that using powerclip?
View 6 Replies View RelatedI used to be able to hatch most anything without problem. Now with Civil 3d 2011 anything more complex that a box or a circle AutoCAD will not find the boundary even when the quick preview seems to find a boundary.
I've tried overlapping the lines and then trimming. I've tried extending to the other lines. I've tried setting the tolerance to 1/2". I've checked that the lines are snapped to endpoints and meet cleanly.
In testing I've found that sometimes it will find the boundary, and other times it will not even when nothing has changed? Noticing that they have to try multiple times and methods to get C3D 2011 to hatch correctly?
The attached file shows the different results (boundaries extracted from successful hatches) that I'm seeing, and sometimes can't find a boundary at all, sometimes it does. Seems to get different results when I regent and at different zooms (not sure if that's the correct terminology?).
bg color of combined shape.jpg
I am creating some geometric patters with the transform tool. Basically a shape is rotated about a center point. When the shapes are combined they create some quick interesting shapes. However, is there a way to fill in the gaps in the combined shape automatically, without having to manually use the smart fill tool?
Breaking the shape apart does not work, because the geometric pattern is based on the overlaps. I included a jpg of what I am doing to circumvent the manual smart fill, but is there an easier way, especially where the geometric patterns become very complex.
I can take the object, trim from a background, break apart that trimmed shape, then color it, or group or shape into a single curve, then align and group with the original object. But just looking to see if there is another easier way.
In Coreldraw 12, I often use combine to end up with a one solid shape with many holes in it. Often I want to add a color inside one of the holes, much like a coloring book, but there is no shape there, it is just empty. What is the quickest way to create a solid that fills that hole exactly?
View 2 Replies View RelatedI would like to use a vector object made in AI as a custom shape to be used as a cookie cutter in elements.. I imported the AI file in photoshop but the "define custom shape" entry under "edit" was grayed out.
View 2 Replies View RelatedUsing Lasso i have created a good shape that i require in my work. so now i want to save that shape i have drawn to custom shapes so that i can use it later also in my future works.
View 4 Replies View RelatedI made an outline of an image with the line tool and I read online that it only creates vectors or something. The solutions online told me to rasterize or flatten my layers. So I rasterized them but the paint bucket fills the whole screen with no regards to the lines I made.
Bottom Line: I made an outline using Line Tool, rasterized all my layers, used the paint bucket but the paint bucket covers the entire screen. I'm 100% sure there aren't any "holes" between the line segments btw.
I finally found the paint bucket tool - but when I try to use it, I get the circle w/ the cross in it (like the ghostbusters background )....it didn't work with .tif or .psd files, but it DID work w/ a .jpg file!
View 1 Replies View RelatedI have a problem while trying to fill a channel that i load from a layer. When i click bucket tool, the colors i choose are only shown in grayscale. For instance, If i select dark red, the color is shown as dark gray. Would somone know how to fix this please? I might''ve accidentally pressed a shortcut key and i didn't realise.. Here's a small screenshot:
View 1 Replies View Relatedpaint bucket. After drawing with pen, i use paint bucket to fill this object, but all layer be filled with the color, that i used to fill this object. I can't fill what i've drawed (but in Corel i can do that). Besides, sometime I can't fill any object because of uneditable error,
View 9 Replies View Related