VideoStudio :: Sequentially Numbering Images
Jan 8, 2012
There has been dicussion in the past about renaming and renumbering images ,sometimes other software was recommended.
Any way to do this in windows from XP and beyond.It may be a bit basic, but if you keep the same name for a batch of images you can easily number them sequentially, I have numbered over 900 images in a few seconds.
In XP- Select all the images you want numbered. Right click the 1st one and select rename Name the image and type a number you wish to start with in brackets ( )immediately after the nameClick on the 1st image and all your images will be numbered sequentially. If you want to use more images later in this way you can follow on with the next number to have a continuing sequence.
View 4 Replies
ADVERTISEMENT
Mar 2, 2013
I'm using Windows 7x64 and have recently installed Lightroom 4.3. Initially worked well but after installing Photoshop CS6 I can no longer see images. The metadata and histograms are there but no images. What I see is a set of gray frames, one for each image in the imported group. Each frame is numbered sequentially, and the total gray frames is the same as the number of images in the imported file.
Â
Using the "Develop" mode I still see only a gray box, though the histogram is live, and as I move the cursor across the gray box it shows R, G, and B characteristics as if the photograph is visible.
View 2 Replies
View Related
Oct 5, 2003
I need a way to take images of a preset size and slice them up into seperate little image squares which are each saved with a sequential number starting with the first square (top left) but in a grid type pattern - so the first square would be saved as '1-1.jpg' and the one to the right of it would be '1-2.jpg' and the one to the right of that would be '1-3.jpg' etc. Then the next row would be like '2-1.jpg', '2-2.jpg', 2-3.jpg' etc. and so on.
Is there anyone who would possibly be able to help write an action to do this automatically?
I know it's a large request but I'm not so good with complex actions and don't know where to begin with this.
Please help if you can. The final 'diced' images are to be used in a website which is a college project of mine, I'm fine with building the website, I'm just not so good with actions and really don't want to have to slice a number images individually (I'm currently estimating there will be a large number of little squares per image - something in the region 300 or so...). If anyone can help I'll work out the exact figures and dimensions so it can be done.
View 5 Replies
View Related
Nov 1, 2013
Is there a way to auto number files with the file number (less .jpeg) and save without having to let my computer grind to a halt, as it does using Automate, contact sheet. The objective is to create a preview set for distribution to clients with the file number annotated at bottom centre. Also, is there any way of creating the text/font/colour/stroke of my choice?
View 5 Replies
View Related
Apr 5, 2014
Is there any (easy) way to re-number in sequential order my 6000 images *without* changing the names of the individual files?
Â
My setup:
Â
LR v5.3
6000 images in a master Nikon file
About 40 sub-folders inside of that Master Nikon Folder..Just one catalog for all that's described above.My preferred view in the Library is Capture Order.
View 2 Replies
View Related
May 5, 2009
I'm scanning in page by page, without taking the photos out. (it's quick and dirty but works best for what I'm doing) Now I have templates set up in .psd for the differenrt sized pics, mostly 3x3 or 3.5 x 5, that I pull the scans into and touch up. Now I want to create an action that saves the photos as a .jpg, but when I do this it overwrites the previous .jpg. And I can't stop the action during the "save as" process. Any ideas what I can do here to streamline the process? I've tried searching, but couldn't find anyrthing specific to my perdicament.
View 8 Replies
View Related
Jan 23, 2014
I have 20-30 or more dwg files in my computer(I keep files path in a database). My question is "How can I print this files sequentially?"
I have just DWG TrueView 2014, not autoCaD. I wouldn't like open those with TrueView and plotting with mouse one by one.
I would like give a command in C# or VBA or just in cmd(command prompt), and get that the computer print my files sequentially, without any question.
View 2 Replies
View Related
Jul 23, 2012
Can autocad automatically create a sequentially numbered array. I do concert seating and am looking to create an array of seats and have them be numbered automatically as I create the array.
View 4 Replies
View Related
Sep 28, 2012
It seems like this should be easy but it's not. I have a block with multiple components. I want them to array sequentially as I drag the grip. First one component, then the next, then the next. What I get is all 3 at once when I drag the grip far enough. I tried 3 separate linear parameters with their grips stacked but that didnt work either. What I have attached is a very simplified version of what I want, but I think once I get the concept it will be easy to elaborate on.
View 9 Replies
View Related
Nov 27, 2013
have a lisp routine that will ask you the starting elevation and the elevation interval, then allows you start selecting polylines and it assigns them new elevations based on your choices?
It seems years ago I had a routine that did this and it also changed the color of the polyline so you could tell which ones you had already changed, but I can't seem to find it now.
View 2 Replies
View Related
Feb 26, 2012
How do I get numbering like the attached image using text in photoshop? I have photoshop elements 9. Basically I just want to be able to type out numbers within boxes, or some other solution that will give me this desired effect easily.
View 9 Replies
View Related
Oct 4, 2013
how to do sequential numbering in CorelDraw or is it even possible? From time to time we are required to produce items that have sequential numbering, say, from 1 to 200 for example. If it were only "one set" that would be no problem, but when it is 5, 10 or more sets then it is very time consuming.
View 5 Replies
View Related
Sep 25, 2006
I have about 100 pages (separate PSD files) that I will be merging into 1 PDF file.
How can I do page numbering instead of going manually into each page and type the page#.
I’m using only Photoshop.
View 2 Replies
View Related
Apr 27, 2009
how i can number multiple images without going through every one and typing the number.
I've just took photos of a wedding, and i have 180 photos that need numbering so i can put on to CD for the bride and groom to choose from. I will make a checklist on paper and they can check off the number of the photo.
View 3 Replies
View Related
May 21, 2009
After doing all the post processing of my RAW file and saving as JPEG, the dialog changes the file number to one that has been used before and asks if I want to replace it. It is usually a number a few back. I have to manually change the number to match the original. Sure slows things down and if I'm not vigilant could end up overighting a file.
View 2 Replies
View Related
Mar 19, 2012
I'm experiencing poor resolution with a title bar that is a png file. I am creating the bar from a vector graphic and creating a large png file that has great resolution. But when it's rendered in the movie it look terrible. Is there a preferred graphic type to use?
View 3 Replies
View Related
Jul 23, 2013
Every time I try to add an image I get a message saying that there is a format mismatch (see screenshot). This is strange because when I first installed it, everything was working fine. This applies to the following image types JPG, JPEG, GIF, PNG, BMP. I have done some searching and confirmed that I am not the only one who has experienced this.
View 1 Replies
View Related
Aug 8, 2011
For convenience, I use my video camera for both video and taking still pictures. For video I use use a wide frame 16:9 while capturing stills I use a standard frame 4:3 (the standard frame allows a higher megapixel). I use VS X2 for creating my home DVD's and I use Photostory 3 for my slide shows.
I've never used the still capture function on VS until today. I needed a couple of stills from the video to match with the continuity of my slide show.
I realised that my screen capture would be wide screen but I figured I could edit the photo and crop it to 4:3. What actually happens is that VS X2 captures the image and squeezes it to 4:3 so in the end I get these long images!
View 3 Replies
View Related
Nov 20, 2010
I've been attempting to combine various AVI clips into one large video using VS Pro X3 and I'm noticing that the beginning of each clip seems distorted. Actually, distorted is probably not the correct term for what I'm seeing. It looks like the main image is in the background and a smaller cropped version is superimposed in the middle of it. This issue only seems to be happening right at the beginning of each video clip. After about 5 - 10 seconds of the clip being played, the image corrects itself and it's fine.
Not sure I can post an screen capture of the problem here.
View 14 Replies
View Related
May 27, 2013
We are unable to import ANY format of still images to VideoStudio X6. Even the tech was unable to do so while in control of our computer. We've discovered others online at other tech websites complaining about this issue.
View 3 Replies
View Related
Apr 20, 2009
Is there a method of automatically adding page numbers that will auto update as pages are moved, added, or deleted.
I often produce documents with a considerable number of pages which I am then asked to change after the first draft. I currently add page numbers manually in order to control the style etc, but there must be a better way.
View 14 Replies
View Related
Mar 27, 2008
I use a template for all my drawings that includes a page number in the lower right hand corner (usually says "Page 1 of 4" for example). I usually edit this number manually, which is fine for documents with a small amount of pages, but if I'm working on a large document (50+ pages) and need to re-order some pages it means editing the page number on every page manually.
Is there some way of having the number in a piece of artistic text dynamically update depending on what page number it's on?
View 14 Replies
View Related
Sep 5, 2013
In my company we use the SSM and label our sheets as follows:
(Sheet Number) - (Sheet Title)
G-1.00 - Summary of Quantites
WM-1.01 - Water Main
etc...
In the border we would like to put page SHEET XX OF YY. The Total count is simple with a custom field however how would I get the XX part to show the sheet number as a number and not G-1.00.
View 4 Replies
View Related
Sep 13, 2007
On my website below (link at bottom), I have all my photos watermarked for obvious reasons,this is done by a normal batch convert action using CS2,the gallery is actually a modified Photoshop "Simple" type of thing.
All of the information you see on the image is actually part of it except for the image number,which is put there by your browser.What I'd like to be able to do is have that image number actually as part of the image and NOT seperate,so if someone saves it they still have that number visible.
Now I can do this manually,but I'd have to increment it by 1 every time by hand,and then copy & paste it onto the resized image by hand,which will take a long,long time.
Is there any way I can get PS to do this automatically for me,so I either specify the starting number,or it actually takes the file name (minus the extension,so no JPEG etc after it)and adds this text to the watermark layer while I put the kettle on?
View 2 Replies
View Related
Sep 7, 2011
How can do batch numbering over my pictures?
Like this
to put numbers(1,2,3...22,23) on the photos.
View 2 Replies
View Related
Oct 2, 2009
What I'd like to know is if there's a way to automatically update the sheet number in separate dwgs.
For example: at work we have 45 separate dwgs in multiple disciplines. Is there a way to have the "x" in "Sheet X of 45" update automatically on each sheet? This way whenever we insert/delete a sheet in the set it automatically knows which number it is in regard to the set as a whole.
Running Autocad 2008 btw. Full Version.
View 9 Replies
View Related
Sep 9, 2011
Ιs possible batch numbering over my pictures?
like this:
How do I get on the images progressively numbered (1,2,3,4...35,36,37 .... ).
View 9 Replies
View Related
Oct 14, 2009
I have just spent several days putting a project together. Mainly still images with some digital video.
When I rendered the project (pal 16_9 frame based also tried lower first) the result is far from acceptable. It looks like a low res picture although I rendered with high quality settings (the same ones I have used many times before) Straight lines seem to have a slight saw tooth effect. If I utilize an overlay the problem is suddenly much more pronounced. Wether this is caused by the overlay itself or the fact that the images are enlarged slightly I don't know.
The video clips from my digital video camera seem to be ok, the problem being mainly with the still images.
By the way the same images created as a slide show in movie factory are perfect.
I have a fast computer with vista installed and had excellent results earlier in the year with another sinilar project.
View 6 Replies
View Related
May 8, 2007
problem with loading large numbers of images, not large images, but a lot of images in VS11. I am loading a lot of images to make my annual slide show for the HS band and I am running into a problem where the images start loading quickly (1 second each) and after about 150-200 images you start to load slower and slower as much as 70 seconds on image #300). I don't remember having this issue with VS9, which is what I used last year.
I tried loading the same thing in VS10 and it is much better on the load. There is a recognizable slow down, but nothing like VS11. Before you ask, I would be fine with doing the slide show in VS10, but running in Vista VS10 crashes on me too much to get it done.
View 2 Replies
View Related
Mar 31, 2012
Is there any way to crop a video clip in an overlay track-not just change the size of the entire image keeping it intact.
View 6 Replies
View Related
Jan 27, 2013
This may seem a strange question, but I do not work with images very often and having just returned from holiday in NZ (how privileged you are to live there Ken) I have some 30GB of video and almost 1000 images to edit.
These images are 16:9 4000x2248, 180 dpi and 24 bit depth, so is there an optimum resolution that these should be reduced to, for creating projects in conjunction with the video (1280x720 HD 59fps) I read some time ago that images need to be reduced in size, but I can't remember why.
View 4 Replies
View Related
