In x2, in project properties, I could select "mpeg2" as the compression type, which would let me select a whole slough of resolutions.
In x3, it seems I can only select DVD pal or DVD ntsc, which of course are extremely limited for the resolution.
I'd like to be able to select 1280x720, for instance. I have old templates I saved from x2 that let me do it, but how else can I do it?
I am putting together 3 mpg files from the hard disk of a camcorder that records in mpg format. Separately, all 3 files combine to approx. 1 GB. When I combine these files using VideoStudio PRO X3, my file size jumps to 2-2.5 GB. All I'm doing is combining and that's it. No effects, no titles, nothing. How come the size explodes so much and how can I combine the 3 files and still have the original combined size of approx. 1 GB?
View 2 Replies View Relatedopening the same image on 2 different computers in photoshop 6, results in one of 72 ppi & 1 of 300 ppi.
View 2 Replies View RelatedThis ones for the experienced PS users. By default, the resolution is 72ppi. I was wondering if anyone had experimented by changing this to a lower or higher number and if the results were better or worse.
View 14 Replies View RelatedI usually do RAW photo editing on Photoshop on my old Fujitsu laptop & have recently I have upgraded to a Mac Book Pro. I have noticed that when I do the same kind of processing on my Mac book, the photos tend to not be as dark & have contrast as I would normally like it to be. Meaning to say, photos that look really dark in on my Mac book look rather greyed & washed out on my Fujitsu, however the photos I have processed on my Fujitsu all look nicely exposed on my Mac book.
So is this due to different screen resolutions? Because the photos I have edited on my mac look really different when compared to on my Fujitsu, like the colors etc.
I used to assign certain width numbers for my psd webpages but it creates horizontal scroll bars on small monitors.
Can i do something with my psd file using photoshop in order to make the webpage fit all screen sizes? I don't like horizontal scrollbars appearing when my site loads. On the other hand, I also don't like un-necessary space appearing on large screens when my site loads. I use photoshop 7.
I have a high-res psd 3300-x5100 which I need to save as a thumbnail 200px wide and another 300px wide. Both smaller images are png or gif.
I see that saving a high-res gif and shrinking the gif to thumbnail results in poor text quality.
The psd has text in some layers and I've found that shrinking the psd image size does an excellent job in rendering sharp text in the smaller image.
Here's the problem I'd like to solve. Reducing the psd image size brings a risk that I might accidently save the reduced psd overwriting the high-res master. This would be a disaster. There are several workarounds, saving a temp psd, reduce, save png/gif. But these take clicks, time and disk I/O. Then there's the redundant reduced psd to delete...
Is there a better safe way to save lower resolution gifs?
I create a new blank image 300 pixel/in call land1. Then i add a photo (new layer) 1024 pixel/in to land1. So when I save, the photo inside land1 will stay 1024 p/i or it will be down to 300 p/i . When I merge layers, what is the final resolution? Do I need to make the land1 to 1024 p/i before add new photo?
View 4 Replies View RelatedI've got ton of 50mb tiffs I need to reduce to small jpegs and watermark.
But I made an action and the watermark looked great on some and microscopic on others.
The files that had a resolution of 4000 (from slides per scanner) were fine.
The files that were shot digital -- resolution of 240, watermark was microscopic.
So only solution is to make seperate actions correct? (what a hassle)
Seems so stange in that the files are all same size more or less in size and the resolution really only matters if you print the dang thing, which I'm not doing now!
I'm trying to merge something in a photo I took but the resolutions are different. The original photo is a little more pixalated then the object i'm including in the picture. Whats the best way to ADD pixalation and bring its resolution down to make the picture look worse so they match?
View 1 Replies View RelatedWhen i use the FraxFlame 2 filter of KPT 7 (very heavy filter) in Photoshop 7 (also tried in version CS and 6 at work, didn't work) in a small image size, it works fine. When i try it on a big A4 image (300 DPI), the computer starts working, and after a long time, the layer i applied the filter on is unchanged. Strangely enough the use of the filter is in my history panel.
My comp is a WindowsXP with P4 1,7 Ghz and 512 MB RAM.
How can I change the playback and still player resolution for my timeline or for a clip?
I would like to be able to switch between full-resolution, 1/2, 1/4, 1/8, 1/16ths etc... (with one setting for playback and another, separate setting for still image/paused frames) e.g. via a right click on a clip/player.
PS Just like in Redcine-X or Adobe Premiere or AE...
Is there away to "one-click" export an image to a set of .png files with different resolutions? (I need this for a set of iOS app icons).
For example: Export a file MyAppIcon.psd into the following:
MyAppIcon_29x29.png
MyAppIcon_57x57.png
MyAppIcon_114x114.png
MyAppIcon_512x512.png
MyAppIcon_48x48.png
MyAppIcon_72x72.png
I almost succeeded in doing this with Photoshop Actions, but can't figure out how to make the file names include the original image file name. In other words, file NewApp.psd should export to NewApp_29x29.png, not MyAppIcon_29x29.png.
I am looking for a program that will rip through a couple thousand psd files and provide a list (preferably csv or xls file) of file names and corresponding dimensions and resolution for those files.
View 9 Replies View RelatedHow can saving files in different Sizes and/or different Resolutions be automated? I think of an action, but I definitely don't know how or if this is possible.
View 1 Replies View RelatedFirst time creating a project and capturing digital (.mts) clips from digital media. I used to have a MiniDV camera which I found easy to 'capture' from.I recorded to SDHC memory card which I then copied (all folders and files) to a hard drive.I am using VS X6.
Method I used -Click on CAPTURE > IMPORT FROM DIGITAL MEDIA / Navigate to the folder where all the digital video clips are (PRIVATE/AVCHD/BDMV/STREAMClick START It takes a very long time for all video clips to be 'read' and 'thumbnails' displayed.
Now comes the problem.I want to select the FIRST 100 clips.I note that to select as clip to import I need to click the top left corner of a clip (and a tick appears) BUT I don't want to have to click on 900 thumbnails.I tried clicking on the first thumbnail then holding down the SHIFT key then clicking on the last thumbnail - didn't work.Tried the same holding down the CTRL key - didn't work.
Does the trial/evaluation version of VideoStudio Pro X3 - DVD factory Pro 2010 support creating Blu ray disks. Or is this only possible with the full/bought version?
I downloaded the trial version of VideoStudio Pro X3 which includes DVD factory Pro 2010 version 1.6.0.367 (dutch language version). With DVD factory starting a new videodisk I cannot select blu ray disk in the project settings. I can only select as disk: DVD and as project setting: Dvd-video or AVCHD.
I searched but could not find any resolution. I do like the editing software so very happy so far but before I buy the software, I want to make sure I can create blu ray disks (do a test).
Note: I do have two drives, first drive is Blu-ray burner (LG HL-DT-ST BD-RE BH08LS20) and second drive is normal DVD burner (TSSTcorp CDDVDW SH-S223C)
I am on X4 and go back years with the program. I thought there was a feature to select only a part of the screen and be able to zoom on that on playback in the project. was this in an earlier version? I cannot find this feature in X4. I know I can do this for an image but want to do it for close ups in videos.
View 4 Replies View RelatedI am familiar with Camtasia, but working my way in VSX6 now. In Camtasia, I could select a segment and simply cut it (with the scissors icon). In VS, it looks like I have to cut both ends of the segment and then delete it. Is that the correct and only way to do it, or is there a more direct way to cut a segment out?
View 6 Replies View RelatedI am trying (without luck) to shift-select all of the photos in a folder to bring into a folder that I've created in VideoStudio Pro X4. I have the folder showing up a highlighted, then go to browse, then to the folder, but with I try to drag the folder into Video Studio, it then stops showing the folder and I get a circle with a line thru it. How does one easily bring in a batch of photos to use as you are building a project??
View 1 Replies View RelatedI have several movie clips I want to turn the volume down to the same level. I don´t want to do it one clip at a time. When I select multiple clips, the sound level bar turns gray and I can´t change the level.
View 3 Replies View RelatedI have alot of paper that I want to reduce & eliminate, I have a bunch of certificates, magazine/newspaper clippings that I have from high school & college to scan & would like to know what color settings would be best.
I also have a bunch of brochures, other odd papers, receipts, & handwritten notes.
I am using an Epson perfection photo 4490 flatbed scanner, on a mac running lion 10.7.5.
I would also like to know what would be the best resolution to use.
I read a little about bit depth, & from what I gather, the human eye can only see so many colors, & going with bigger color depths is good where one has to do alot of editing.
most of these items are for records & archives, & maybe to be able to print from the scans, so I can throw out some of my paper.Also, when I scan in Adobe RGB, would it be best to use 48 bit depth to go with the fuller color? & when I use sRGB use 24 bit depth?
I'm in the process of evaluating several video editing programs. So far I've used AVS Video Editor, Cyberlink Power Director and Adobe Premiere.With each program I've spent 30 minutes making a quick demo video to see how intuitive it is and how well it performs. Today I downloaded Corel Visual Studio and decided to give it a go.
I've run into a problem straight away.I've tried to import raw avi files.So I'm using the "Select Import Source Folders" screen.When I navigate to the folder containing the files the OK button is greyed out and won't work.It's greyed out all of the time.
In Quick Select command function, I want to use more properties value to select one type text or other object.
View 9 Replies View RelatedWhen I click the select tool, a brown selection type of rectangle appears in a particular area of the illustration, even though I have not clicked on the illustration yet. I assume it is some type of warning indication, but don't know what. P.S. It is draggable and scaleable - I can move it off the artboard. An example:
View 5 Replies View RelatedI know this discussion title is a bit murky, but the problem is a bit odd. I have Photoshop CS6 v13.1.2. In this version, I will activate the Select Tool, check Auto-Select: Layer, check Show Transform Controls, and then while using the Select Tool I will drag to create a rectangle to select multiple layers with content within the specified area.
Unfortunately, this action only works when I begin the selection from outside of the canvas area. If started from within the canvas area, no rectangle will appear, it will show me a measurement of my selection size, and then no layers will be selected upon release.
This cannot be working as intended right? I mean multi-select dragging cannot be intended to only work when started outside of the canvas right? Is there some way to fix this issue? Is this a bug? See the images below for more information on this issue.
I work with shapes all day designing mobile apps. Thus, I'm constantly selecting and resizing rounded rectangles. When resizing I have to individually select all four points of a side to move it without distorting the rounded corners. I cannot click and drag, because that will activate any shapes underneath the one I want to select.
I'm looking for a plugin or alternative to easily select the entire side of a rounded rectangle. IE - I click one point on a side, and it auto selects all four points on that side, or the like.
I remember being able to select anything on the canvas with my Quick Select tool in CS5.5 Photoshop Extended. Recently, making the switch to CC, the Quick Select tool will show my slection as I drag along the canvas, but once I release the mouse, the selection seems to be reduced to the visible pixels. I was intentionally trying to fill the transparent sections with my effects as well.
Mind you, the magic wand will select transparent pixels just fine, but it also adds unintentional sections which is irritating. I should probably also pint out that I already looked into the "lock transparence" option in the layers, but I did not activate anything of the sort.
if there are keyboard shortcut keys to these two operations?
1. Selecting a different layer than the active layer w/ keyboard key and selecting an item on that layer on the canvas?
2. Shortcut key strokes to select > Transform > Scale?
I'd like to know the alternatives in 3ds Max to these popular tools:
1-When you have selected an edge loop, let's say, on a plane, how to select the polygons inside that loop? At the moment I'm using the split tool as a (very bad) workaround.
2-When you have selected some polygons, how to select the edges on the "boudndary"? (kinda the opposite of the above) At the moment I'm using the detach as element and border selection as a (very bad) workaround.
I accidentally turned something on in Autocad, and I want it to go away, I have no idea what it's called or how to get it gone. It's akin to the "select other" window in Inventor when you select at the intersection of several objects.
How do I make this go away?