We have experienced this problem with multiple versions of Revit. When we plot to PDF (bluebeam driver), it will sometimes not create the final sheet that was checked in the list of sheets to print in the print dialog box.
View 3 RepliesYears ago, there was a program of routine that would plot files to a sheet resembling a photographer’s contact sheet. You would tell it which folder to use and it would print the entire folder. You could tell it how many rows and columns and it would fill up the 8.5 x 11 or 11 x 17 sheet with little images of the files.
View 2 Replies View Relatedwhen I select the printer/name: Adobe PDF
under Paper size: the standard Arch sizes are not there...
2013 Civil 3D
I am running CAD Map 3D 2011 and a Windows XP SP3 machine with 4GB RAM and a 128 MB 3D card. I am trying to send the plot to a HP Designjet 800PS plotter.
The file that I am working on is not overly large and has no raster images or OLE objects attached. It does have several open database connections that I am using to theme one of my drawing layers. The sheet itself is an odd size (36" x 54"), but I have printed other drawings of this size before and I've never had problems.
When I first plotted the sheet, it was taking forever to spool, so I ended up canceling the print several times. I finally decided to try to plot to PDF, but this created a HUGE spool file (2.65 GB). Since it was actually spooling, I went ahead and let it run. It ended up taking about an hour to spool and print the PDF. Before I opened the PDF, I checked the size and found it to be about 12 Mb. When I opened it, all that was there was a blank sheet. After that, I re-sent the plot to the HP plotter and just let it work overnight. When I got in this morning, there was a 36" x 54" blank sheet waiting for me.
I've checked the basic settings and none of the layers are frozen, off, or set to not print. I also increased by page file size to work with the plot, but that does not seem to have had any effect. I've tried creating several different .pc3 files, but the issue has stayed. I am now trying to have another person open the file and print it from a different workstation, but so far no luck.
As a side note, I tried a work around by plotting to a dwf file using the included dwf driver. This spooled and plotted very quickly (<60 seconds) and the dwf file appears just fine in design review. However, when I try to print from design review, it won't let me set it as a 36" x 54" plot; it keeps with with the standard print sizes only.
This is an issue for which no one in my office has any solution. We create all of our plan sets on E1 size paper. However, when we plot them for redlines we print to C-size to save paper. I know you can "publish selected layouts" to plot numerous tabs at a time. However, I am unable to figure out how to make them plot to a smaller size paper than what the page is set up for. Is there a way to plot all of the tabs at a smaller scale without plotting each tab individually?
We just recently upgraded to AutoCad 2014.
i made a 3d view with background sky image and looks great on the cover sheet. but when exporting to dwf it does not show up.
View 3 Replies View RelatedIn our company we currently model using coloured lines rather than the Revit desired black/white but we are more and more being asked to print the odd view on a sheet with coloured lines or a coloured 3d view.
As some of us have grown up on th edrawing board through to Revit we are so used to the coloured lines and feel that it gives the drawing depth and is so much easier to understand.
I have been trying every way to keep the coloured linies but using view templates. filters and phasing to enable me to change views quickly from coloured to black and then back but there is no easy quick transition especially as we can't use these to change standard linetypes.
Why Autodesk have made this such a difficult issue within revit... Now we can model in 3D, create schedules automatic yet Autocad is much better for plotting...
Using Modify Sheet List Tab - Rows Panel - New. It will not add a new row to my Sheet List.
View 2 Replies View RelatedWe just started in 2014 last week. When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?
View 9 Replies View RelatedI am having trouble plotting the lines from my drawings. From sheet set manager. It plots the image, text and border xref but when the lines start to plot they turn off in task manager from gis all turn to exclamation points. These lines are in the background from gis.
View 1 Replies View RelatedMy colleges and I are having trouble plotting a batch of drawings (Layouts) using sheet sets. We believe that we have set up all the parameters correctly in order to accomplish what we want. First off, we have set up the page set up in each layout properly. We have also set up page set up overrides to plot sheets at different sizes. The problem is that when we send a batch of drawings ( ex: 30 drawings) only the first drawing in the batch gets plotted. We have also tried plotting from the Publish dialog box and still that only plots the first sheet.
Do you think that the problem is at the networked software that the plotter uses? Or is this having to do with additional parameters in the sheet set that I am missing?
I have 64 bit machine, Windows 7, kipp plotter, and two sharp printers.
When I send a sheet set manager plot to any of my output devices I get an autocad error. That boots me out of Autocad. I have used this in the past with 32 bit machine, Windows XP , kip plotter and two sharp printers and have had no issues. It worked great.
We have a new printer/plotter in our office and Autocad cannot find the old one and so I have to select the new one. Here's the scoop:
When I am in the layout tab, everything is perfectly aligned in my layout sheet (24 x 36) and so I type plot and before the dialogue screen appears (We just got a new plotter) Autocad says: "such and such printer: This plotter config. cannot be used for blah blah blah.... The None plot device has been substituted." Which makes sense because that such and such printer is non existent. So i click ok. and the usual plot dialogue screen displays.
I select our new plotter and the exact size of my layout sheet (24 x 36) and click apply to layout and then preview it and it shows the layout cutting off my titleblock on the right hand side. So I cancel the plot (having applied the new printer and 24 x 36 config.) and look at my layout and either my layout sheet or my linework has shifted about 3/4" up and 3/4" to the side.
Why did something shift? My layout sheet was already aligned and at 24 x 36. I don't want to have to move it every time especially if I need to print off older drawings which are set up with the non existent printer. Should I or could I make autocad ignore the old printer and tell it to recognize the new one so I wont ask me every time i open an older drawing?
I've been try to use the Multi Sheet Plot routine that's provided with the Inventor 2014 install.
I'm attempting to plot both Vaulted and Non-Vaulted idw and Inventor .dwg files.
Regardless of drawing type or location, the Multi Sheet Plot routine is unable to print any files. The application reports a failed while reading error. None of the settings within the application seem to have any effect on eliminating the read file errors.
What steps must I follow in order to successfully print multiple sheets of a designated printer?
Inventor 2012 Certified Associate
AutoCAD 2012 Certified Associate
Product Design Suite Ultimate 2012, 2013 & 2014
I'm trying to incorporate in my new workplace the Sheet Set in our plan production.
But one of the powerfull thing of the SSM is to publish multiple (or single) sheets at a time.
Well, i tryed it since a few months in and out publishing via the style sheet on the sheet set template i'm building and it doesn't print.
The publishing icon in the status bar of civil 3d 2012 keeps on going for ever !!! (Even when i cancel the job, it doesn't stop the icone, like it's jamed)
Btw, even if i pass by a drawing that isnt in the SSM and choose several layouts to publish it does the same thing too.
I use to do this on a 2008 version of Autocad.
Using : Autodesk Civil 3D 2012
OS : Windows 7 - 64 bit pro
We have Adobe Acrobat Pro which has a plugin to allow batch plotting of PDFs from multi-sheet drawings. Works awesome in Autocad 2009 and before. It DOES NOT work with Autocad 2011!
We have drawings with 70 sheets and it's nice to print the entire document to a single PDF in one step. Takes less than one minute in Acad09. Nice!
Ghost in the machine or something:
- HP T110044 plotter.
- All drawings in this project (oops did a saveas and now I screwed).
- All Windows 7-64bit
- AutoCAD 2013
- drawings have Revit AutoCAD dumps X-referenced to them
- Title block is x-refed and created same way as above
- drawing scale is Unitles as well as insert units
- plot preview shows a drawing at 100%
- Drawings will plot fine to 50% scale and 100% scale to PDF but NOT100% to the HP plotter.
- when ploting to 100% size, plotter progress bar in AutoCAD takes awhile, hangs, then dissapears and a new bar appears and jumps across and spits out a blank sheet.
-I have the "plot paperspace last" checkbox checked.
- Could my plotter driver be corrupted?
- Tried on several machines and same thing happend.
I have a set of drawings.
Titleblocks are drawing files with the floors xref'd in.
It's a pretty regular aggregate xref method.
I have a sheet with a roof plan.
The third floor (unique xref - attach) has vpcolours assigned to layers so that the walls show greyed out, for routing roof drains.
If I plot this sheet on it's own, the walls below show.
If I plot the whole set by shift clicking the drawings in the sheet set, and choosing publish to PDF, this drawing doesn't show. I get the roof plan without the xref'd walls below showing.
I'd like to issue one pdf file of the whole set, but this one sheet in the middle isn't showing. I don't have an adobe suite to plot the roof plan on it's own and cut it in for the wrong one because $1500.00
I'd like to be able to plot the draiwng correctly from AutoCAD.
Ive got a A3 drawing all set up to plot to my printer and it works fine.
Unfortunately the same cannot be said when I use the _exportpdf command (or the PDF function in the ribbon):-
- If I export using the current layout then the top and bottom of my title block are chopped off.
- If I change the paper size to A3fullbleed then it does plot the whole drawing, but not to scale (even though its still set to 1:1
- Changing to the other A3 options goes back to chopping off the top and bottom.
From my limited knowledge It appears that the columns need adjusting, trouble is, i'm not sure how?
Is there a way to set the Dwg to Pdf.pc3 so that when I hit plot, it "knows" to save the pdf in the bloody folder that the source .dwg file is located....I can see how to set it to 1 single default folder in Options ( i.e. my main Clients folder) but really, how to get to to plot to the source folder..... has got to be less than 1/2 hours worth of coding....I get pretty tired of browsing/scrolling etc to where I want the pdf to end up.
View 2 Replies View RelatedMy computer crashed. Fixed it, but when I use "Cutewriter" now, it doesn't show
the different line weights.
it seems that it doesn't pick up the different weights.
am using ACAD2008 on windows XP. I have just started having this problem that if I choose to plot from a window the plot dialogue box locks up after the window is selected and the command line is still asking for the corners of the window to be selected. But everything plots ok if I use extents.
View 2 Replies View RelatedWe use several different printers at our company, and one thing that I find really bugging is that I have to change the plot settings on each sheet, if the file has been worked on by someone else.
Is it possible (for example) if I've got 7 sheets set up, they all have an A3 drawing set up (correct extents, pen settings etc), for me to highlight all of the tabs and just change the printer? Rather than going into each sheet and manually changing them?
We've got an HP Designjet 455C attached to an SBS 2003 computer.
From Autocad, I can print when I set the page size to A4 - as expect, it prints a nice A4 sized plot on the A1 width roll. But if I try to print full size plots, nothing happens; the document spools, but the printer does nothing.
It must be something to do with paper size or orientation, but I can't find what. I wondered if there was anything well known I should try (I'm not that familiar with Autocad - yet).
Part of the problem was inconsistency.. sometimes test documents would print, and then they wouldn't! I also got one which seemed to print at the right size, but was only printing part of the file content. These are existing Autocad files, with a printer that has been working in the past.
Can I print all layouts in Same time. means I have 5 layouts in a file, want to print by a single command without repetation of plot command?
View 1 Replies View RelatedTwo of our computers have windows 7 and we are unable to publish or if we plot we have to wait until that page is completed before sending another page otherwise only some the information shows up when printed (ie. no dimensions or no title block). This does not happen on the other computer in the office which still has windows XP.
View 2 Replies View RelatedOur 50% plots don't print some entities. They plot fine at 100%. This occurs across multiple workstations. I first made sure that all the systems were updated with the latest updates and that the plotter driver was updated to see if that would fix it. No change. All workstations have Revit 2012 with update #2. Printing to and OCE TDS600 with the newest driver.
View 4 Replies View RelatedI am finding that my DWF files sent to the plotter are plotting with the linework being heavier than the same file sent directly to our plotter. These are just lines that should plot with a narrow width (ie walls on a floor plan) but they seem to be about twice the width and hence look "darker". Is there a setting that I am missing or some other way to get the lines to plot out thinner? Also, TTF fonts plot thicker in DWF. I've tried the various options in the DWF viewer when sending to the plotter, but none seem to work.
View 6 Replies View RelatedI have an issue with plotting line thickness, when I use the company setup using a d-size B&W.pc3 and mono chrome.ctb files, i can't seem to get the plotter to show line thickness. But using the same setup with a customer border, I can get the line thickness.
Also I not sure if this makes a difference, but the company plots from model space and where most of our customers use paper space.
I am trying to plot a layout sheet 24'' W x 18" H. The frame on my sheet is 22''W x 16''L (inside the dash lines limits we see on the layout). I believe I prepare the print correctly:
- Select the printer (HP DESIGN JET PS)
- I use the window fonction to select the printable area ( left upper corner and then the opposite corner).
- Select Paper size Arch C (landscape)
- Paper orientation: Lansdcape
The preview shows that the upper and bottom lines of my frame will not print, and they do not, even if I try (see the attachement below).
Is this a driver problem?
I have a Dell 515 plotter printer connected to a network computer. I can print to it from other programs, but as of this evening, when I select the printer, the screen goes white and autocad dies. I can print to a pdf or even select another printer that is not even turned on. This also happens when the 515 is set as the default and I select print to default system printer.
this has happened before and It seemed like a lucky fluke that i got it to stop. something about the order of change scale, preview, change plotter etc, but no luck this time.