I inserted a linked revit model which is the structure and i'm having trouble with two subjects:
- the linked revit model doesn't overlay the walls and other families;
- i would like to change the color of this model in order to have a better visualization, and also isolate it from the main model.
I have a project in wich rooms functionality is compromised. I don't know why the room tool doesn't recognise a simple room delimited by walls whose property divides rooms is set to yes. If I place a rectangle of rooms delimiters the room tool works properly instead. If I start a new project the tool works properly.
View 1 Replies View RelatedI want to turn my in-place mass walls (sloped or helical) to structural walls but i don't know how to do it. I'm able to do the walls but when i switch it to the analytical view the wall doesn't appear because it's not structural. It's there a way to do in-place mass structural walls.
View 1 Replies View Related In "Categories" of the filters window, it can be selected things which composes its mass, such as Mass Exterior Wall, Mass Glazing, Mass Roof. And these things can be clicked only after its mass become energy model.
I set up a filter rule of Mass Roof and applied it to V/G Filters of a view, but it did not displayed in Analyze Mass Model, the same as Mass Exterior Wall, Mass Glazing.
I have a drawing containg wall elements that is referenced into a whole bunch of other drawings (roughly a hundret).
In the wall-drawing i recently set the walls color to "by layer" via the display properties in style manager.
Unfortunately they keep their old color in the other files. I tried visretain and it didn't do the trick.
I recently subscribed to the Creative Cloud and installed both Photoshop and Lightroom.
After working with the new LR5 for the first few days I noticed that when I am within the Lens Correction and I click 'Manual' in order to manually correct perspective you always get a grid overlay that shows up when you hover over the different Transform options (Distortion, vertical, horizontal, etc...) and it no longer shows the overlay.
In order for me to correct the perspective I have to manually click Option+Comand+O in order to get the grid, which is a little bit annoying since it was automatic before.
I need to create a carriageway overlay corridor on and existing carriageway that has a curved surface and not a typical crossfall. I've tried the LaneParabolic assembly but it doesn't give me the control I need to target an alignment and profile.
View 8 Replies View RelatedThe overlay of free guide and working area in the viewer don't work. I can't see any of these overlay indicator in the viewer. Is this a bug or do i miss something ?
View 2 Replies View RelatedI'm at my wits end trying to cut a wall with a void. I want to chamfer the corners of a wall, but I can't get even a basic void to cut from a wall. I get the error : "This Mass has no solid geometry for its Void Forms to cut. They must be deleted, or solid geometry added and cut." They clearly intersect, what am I doing wrong?
View 2 Replies View RelatedHow do you tag the rooms that are not fully enclosed by the walls?
View 1 Replies View RelatedWhy Revit 2013 when the walls are installed on some laptops is clearly visible.
View 1 Replies View RelatedThere are certain walls I just can't fillet, what's the reason of it? See attached pict.
View 1 Replies View RelatedI am looking to create a grid to "Overlay" a topographical map in model space. Essentially this will be built on a seperate layer titled grid that can be turned on or off to essentially "toggle" it. What is the most efficient way to create a grid in autocad? As well as assure the proper scale. Say I want it to have 10 ft. by 10 ft. cells on a topographical map that has a scale of 1" = 50'.
View 9 Replies View RelatedI am currently doing an MEP project and I am tidying up the model at present. I am having problems attaching the walls to the roofs. There could be a simple solution but I haven't found it yet !
I have tried attaching top base etc. but its not working. I only seem to be able to select one side of the roof when selecting where to attach the walls. I have attached 3d pics showing the walls that are extruding & also one of the walls that I am trying to attach.
Just what the title says. Walls dont appear when drawing in plan view but appear in the 3d view. how come??
View 1 Replies View RelatedI drew some internal walls before adding a floor slab. After adding the floor slab the walls disappeared in plan. I can see them in 3D, in the correct place, but not in plan.
The floor slab is in the right position. To fix the problem I redrew them all, but why did they disappear and how do I prevent it from happening again?
using zoom wheel on mouse, how do i enable passing through walls, instead of continuing to zoom further and further in on walls
View 1 Replies View RelatedIs there a way to prevent walls from joining?
View 1 Replies View Relatedwhy my existing walls show up fine in my sheet but don't plot to .pdf. I have the view range settings set correctly and all other sheets plot fine.
I thought maybe the roof transparency was the issue but Revit is usually pretty much a WYSIWYG plotting operation and the walls are displaying in the sheet file. Haven't tried plotting to a plotter but it doesn't matter. I need to plot .pdf's.
How do you join a square wall to a slanted roof so that the walls are not sticking out of the roof.
View 1 Replies View RelatedHow to bridge the gap at the intersection of two types of wall. I’m wondering which “function” settings are required such that the intersection between two types of all walls (30 cm and 10cm) produce solid line.
View 2 Replies View RelatedDo I have to use the Stack Walls family in order to have my walls line up on top of each other between the levels? My walls are all slightly off in 3D view and look messy..
View 3 Replies View Relatedreinstalled revit and when i pick wall I can't choose generic walls.
View 2 Replies View RelatedIn my 3D View my walls disappear when I de-select the structural box. Although drawn as regular walls they are store front panels so carry no load other than their own weight. My Visibility Graphics dialog box seems to have limited options for this. Am I missing something? How do I get them to re-appear in my 3D View for rendering without switching them to a structural wall?
View 2 Replies View RelatedHow do you un-join walls so you can move one selection set without impacting the other?
View 2 Replies View RelatedI have one wall (basic wall) where !'ve edited to profile to have a large rectagle omitted. I have a second wall (curtain wall) that needs to occupy that space with a 1/2" gap on either side and a 1" gap along the top. I can maintain the gap along the top, but when the gaps along the sides shrinks below 1", the walls meet and the gap is reduced to zero. I've tried making the internal wall into a group, but whenever the outer wall's profile is edited to within 1/2", And I click the Finish button, the interior wall (inside the group) extends to meet it. Automatically Embed is turned off for the curtain wall. I've tried locked dimensions, but that didn't seem to work.
How I can maintain the gap without the walls closing?
I'm making a pool and i wanted to round the corners to make it seem more real. Is there a way to do a sort of "fillet" on the corners of the walls to make them round?
View 3 Replies View RelatedNeed to make a wall with varying height. For example, 3000mm at one end and 4000mm at the other. The result would be a sloped ceiling and roof. Should I make a 'mass' and attach a wall to it or is there a way to vary the height of an existing wall?
View 2 Replies View RelatedI am laying out a simple structure. Bearing wall to bearing wall is 35’, with a few non bearing walls between the bearing walls. I will be using a truss to span from bearing wall to bearing wall. What would be the best work flow for the drywall ceiling material. The ceiling seems to require a core element. I cannot seem to manage drywall alone. If I create a ceiling with 2x4 core and drywall finish and create a ceiling over the whole area the ceiling seems to auto dim to the ceiling finish and not the core 2x4. Then there is the issue of the clean up at the top plate were the wall and ceiling finishes meet
View 1 Replies View RelatedI am doing some tests to export my model out to IFC. The slabs and walls do not line up. Revit 2012?
View 9 Replies View Relatedwhether it's possible to modify the profile of curved walls. Normally when you select a wall, it should be possible to edit the wall and its profile, though when a wall is curved, the button "edit profile" is gray. Is there any other way to obtain a similar effect, maybe using masses or so?
View 2 Replies View Related
