I've tried running an energy simulation for a building located in Recife, Brazil, but the weather data is incorrect, even though it displays the correct location. How I can use correct climate data with Cloud services?
View 1 Repliesis it possible to do a energy calculation in Revit?
View 1 Replies View RelatedWhile I run analyze, there's always an error
View 1 Replies View RelatedI'm trying to find the best standalone or software combo to use for LEED energy modeling simulation submittals. I hope that Revit Architecture 2012 is at least one of the best choices for building the model. I haven't gotten into the modeling and analyze features yet but I'm hoping they are DOE2 compliant?
View 6 Replies View RelatedUsing Revit to create simple masses, while I am signed in, I run the energy analysis and keep getting this message - image attached
When I create the same mass in Vasari and run the energy analysis - I do not get this error, the report works.
The only way to do FEA analysis is through Autodesk's cloud server, the problem is my company's firewalls will not allow us to store, connect, or use cloud's or any server but ours. So I wondering if there is a option or setting that I can change and do all the computing locally on my machine.
View 1 Replies View RelatedNot seeing a download option in my CC Apps manager to download LR 5...
View 2 Replies View RelatedFuzor? The features are extremely amazing. I have already tired it for one week due to I am Fuzor's beta tester. The real time simulation are really excellent and I have already tired it for one week. I found that I can't use Revit without Fuzor haha. If you want to know more detail, check the website URL..... It may have more detail and I heard this software “Fuzor” will publish in AU.
View 3 Replies View RelatedI was working on a file earlier today when it failed while processing after I edited a particularly extensive mass. It asked if I wanted to save a recovery file, I said yes, but I am not sure it worked properly (it might have said 'could not be saved' but i clicked 'OK' quickly so i could re-open revit and get on with work)
Anyways, when I went back to start again it said I had to manually recover the file and that I should ask Autodesk support. I looked on forums and they said i should go to the 'open' dialogue box, check the 'audit' box and reopen the file, but after doing this I got a second error message that said something along the lines of "your file has an incorrect schema'.
This project is not part of any collaboration, it's standalone and on my home PC.I couldn't find any email to write to, or number to call, or FAQ, so here I am.
This is the third damned problem I've had with this file, might have something to do with a trojan on my computer chewing into my RAM but whatever the case it's time this crap stopped!
is it possible to change the weather in a photo? I have changed the sky in this pic but it is obvious because the foreground is still gray and doesn't look sunny at all. Can this be changed?
if you change it yourself, do let me know how you did it. I need to learn.
Original:
I change the sky:
IV 2011.
I have an assembly with a FEA simulation result. I can run a report and get the reaction forces and moments at each constraint. I would like to run a new simulation with different constraints and use the reaction results from the first simulation as loads in the second one.
Currently I do this by running a report on the 1st simulation to get a table of the reaction results. I then manually add those forces to the 2nd simulation. This takes time to type and the forces must be edited each time I re-run the 1st simulation.
Is there a way to use parameters to automate this?
how to make white text on a black background look weather beaten?
View 2 Replies View RelatedNone of my custom materials are rendering on the cloud. If I render it on REVIT, they come out just fine. Is there something that I need to do to get my materials to show up?
View 1 Replies View RelatedI have been trying to send a render in cloud but the following message keep on appearing:
Si è verificato un problema (a problem occurred). Il servizio rendering non è stato in grado di completare la richiesta (the rendering service has not been able to complete the request).
which could be the problem and to get it solved?
Downloaded the on-line trial version of Revit LT 2014. I want to open/convert old .dwg files I have on my PC to play around with, but since it's an on-line version, I don't know how to get those files into the cloud.
View 1 Replies View RelatedWhen i import a pointcloud into revit the scale is not right. Is there a way to fix this
View 1 Replies View RelatedI have just loaded Revit 2014, and then loaded a project file created in Revit 2013. When I try to render a view in the cloud I get an error message that says "The file could not be translated.-1" I have tried this with several projects and get the same error for all.
However if i create a new project in 2014 the render works fine, it only seams to be a problem when I upgrade a project from revit 2012 or 2013.
how can I get a .dwg file of point cloud, to work on the Revit?
View 1 Replies View RelatedYes, I am new to Revit, and I can add a revision cloud and see the line added to the rev block but I'm trying to add revision and have it show up on the rev block without adding a rev cloud. I did it once and can't figure out how to do it again. On the Sheet Issues/Revisions dialog box I check on the Issued box and on show I've selected Cloud and Tag, Tag, and None.
View 2 Replies View RelatedI am using Revit 2013 and I am rendering in the Cloud and my renderings are not turning out as well as I want them to. I was wondering what the intial settings under the graphics should be? like what shadows I should use? how high the exposure should be? Even when I turn the sun completely off the sun still shows through the windows. My renderings are also showing up grainy.
View 1 Replies View Related20 times now when i've tried to render to cloud i get the same fatal error message and tried this on different computer as well. it was fine and then tried one render and keep getting same message - see attachment.
View 1 Replies View RelatedIs it possible, short of doing some programming through the Revit API, to change the shape of the arcs created with the Revit "Revision Cloud" tool? For example, with AutoCAD you can enter the size of the arcs that you want to use when you use the revision cloud command. Is there anything similar in Revit?
I have done some searching and am surprised at how little mention there is about both the strange look of the clouds produced by the Revit tool and their lack of flexibility. Everyone focuses mainly on being able to associate clouds with deltas and a Revision Schedule, which I admit is important also.
Im having to cloud Revisions to my drawings. Heres what my Revision Schedule needs to be like
Revision 2 (Tag # 4)
Revision 1 (Tag # 2)
Bid Issue (No Tag)
Is there any way to change the Tag number? Because right now this is what im getting
Revision 2 (Tag # 2)
Revision 1 (Tag # 1)
Bid Issue (No Tag)
Is this possible? I don't want RBG color values or intensities I just want to change the default pointcloud color from black to something else.
I want to invert my background color and save my eyes but when I do I lose the visibility of the point clouds which are also black...
In revit 2013 I have used the point cloud (exported from Faro Scene and imported in revit 2013) without any problems. This time (another project) I have deleted some points with Recap of the cloud after edit with faro scene. Now I have imported the *.rcs files into revit 2014 and I have some serious problems..With diffenernt zoom levels some areas of the point cloud disappear. On the picture is only one pointcloud visible. If I click on it, it dont look like one, but it is really only one. And the disappearing areas are rectangles. The same problem is on floor plans. URL...
View 2 Replies View RelatedA colleague of mine has rendered a panoramic image at Autodesk 360, but when he downloads the panorama, it is just a series of still images. Any program that will stitch these images back together so the panorama functionality can be maintained locally?
View 6 Replies View RelatedIs it possible in revit to draw a revision cloud having rectangular and circular shape as we do it in the case of autocad.
View 5 Replies View RelatedI'm trying to use a point cloud in Revit, and I can't make Snap to Point Cloud work.
The "Snap to Point Cloud" box in Manage/Snaps is checked, but there is no snap available when I eg. try to insert a wall in plan view.
I use Revit Architecture 2012, Build 20110916_2132(x64) Update Release 2 with Point Cloud Hotfix installed. The point cloud is indexed in Revit from a .pts file.
Using Revit Architecture 2013 with Update 1 on a Windows 7 32 bit system. I've rendered successfully in the past ( a month ago, as I recall) and then, as I continued working on hte model, the ability was gone.
I receive either the files could not be uploaded or the files could not be translated errors each time. It's quite frustrating. I love this product, but I am in grief becuase of this.
I've tried all the suggested remedies in the book: Logged in and out from Revit, cleared the firefox cookies and cache (used ccleaner) logged in and out of the 360 account on the web and said my prayers. Several times. I even uninstalled and reinstalled Revit on a different computer, to no avail.
Since other models render perfectly, I suspect a problem with the model.
When attempting to launch the Render in Cloud feature in Revit 2014, the following error message is displayed:
Render in Cloud
A Problem occurred.
The file could not be translated.-1
Is there a way to achieve the calligraphy line style found in AutoCAD for revision clouds in Revit?
View 1 Replies View Related