We have some FLV files we're looking to edit at work, and then export as MOV for upload to YouTube. I'm currently receiving signifcant quality loss in this process. I've tried a variety of work flows and export/compression settings, and can't match the original quality of the FLV file I'm currently receiving for editing.
How to reduce/remove the quality loss I am currently receiving?
I finished my movie and cannot seem to find a way to get this burned successfully to a DVD. Encore did not download with my month purchase of premiere pro cc and when I open the creative cloud there is not additional options to download encore. I have tried exporting the media to a MPEG-2 DVD file however, windows media player cannot seem to open that file and I have not been able to successfully burn it to a disc. I just want to burn my movie to a DVD to play on the television
View 10 Replies View RelatedI've recently been brought on to a production (hour long doc) that's pretty much already been edited to time (picture locked), however at the time of the editing they didn't have a broadcaster. Now they do have one on board that's requesting delivery in 60i.
All the footage was shot at 29.97p with a 5D Mrk 3. The show was started in Premiere CS 6 but they upgraged to Premiere CC. I know that it's now possible in Premiere to change the sequence settings of a pre-existing sequence. I was just wondering what would be the simplest way to convert the footage / timeline to 60i from 29.97p footage sititng in a 29.97p sequence. Do I have to re-transcode all of the footage in the edit? or can I just change the sequence settings and have premire treat the 29.97p footage as 60i? I assume this wouldn't change the running time of the edit since I'm just splitting the progressive frames into fields.
Running a MacBook Pro (osx 10.8.5)
Premiere v7.2.1
Premiere's interpretation of the footage...
Current sequence settings...
I am planning to use a 50fps timeline, but my camera does not support 50fps, so the next best thing I can do is 25fps. My understanding is that if I shoot with a 90 degree shutter at 25fps, then that is like shooting every second frame of native 180 degree shutter 50fps. I hope that is correct The question is, how do I get Premiere to interpolate the additional frames so I have a nice smooth 50fps finish? Do I need a plugin? I don't want the blending modes that just overlay adjacent frames. I'm looking for a solution that creates brand new frames with moving objects where they would have been, had the footage been shot at 180 degree 50fps in the first place.
View 1 Replies View RelatedCan I use "edit in" in Lightroom to move video clips to premier or premier elements to edit them?
View 17 Replies View RelatedHow can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
Syncing in plural eyes is good with our pro res files, but when I try and sync with some mp3 files from a zoom h1 recorder it goes black at the bottom of the timeline and responds really buggy.
View 1 Replies View RelatedWhenever I want an image that I have edited in Photoshop to look good in a browser, I have to convert the image to my monitor's profile for it to look the way it did in Photoshop. So, the workflow is 1) finish editing 2) convert to profile for my monitor's profile 3) Save for web...
Color mgmt makes my head swim but I sort of see why this is. But my question is, most places on the web, I see people are just converting to SRGB for the web and I will say that that does not work for me at all. Does that mean they are talking about converting the color space and not the profile?
I admit that my monitor in its uncorrected stated is way off. That is to say, after I run the Spyder software my monitor colors look a LOT different. I shouldn't think this would matter but I'm just throwing it out there. I am a Windows user.
The reason I am asking this is because when I try converting images on export in LIGHTROOM to my monitor profile it does no good. The image looks terrible in the browser.
Am I missing something? Do I have a setting set wrong somewhere or does everybody have to convert to the monitor profile to get stuff to look right in a browser.
I have a milti picture file on photoshop that is too big to copy to a single cd. Is there a way that I can convert this to a pdf slideshow that will fit?
View 12 Replies View RelatedWhere you convert to B & W on Version CS2. I had elements 8 for a while until I went into the big leagues and there was a nice area there where I had several 'programmed' options for different variations of B & W for the same photo to choose from. Where is that on CS2?
View 8 Replies View RelatedI have been using VS since version VS5 and lately VS X2. Now I have upgraded to VS X4 Pro, the box version.
The installation went well and am just performing some tests. I was curious in the new facility with converting 2D to 3D.
I followed the manual and tried with one clip and went to the Share step where I selected Create videofile, selected 3D and DVD as well as AVCHD. My clip was in full HD. I went to the Options menu where I ticked 3D Simulator and Anaglyph.
The result after rendering however was only a white screen but with the sound from the clip. When rendering the same clip to DVD or AVCHD in the "normal way" everything was OK.
As Microsoft started to eliminate DVD support in his flagship OS I'm thinking about converting DVDs content to a more modern standard (e.g. mp4 (H.264)).
In X5 SP1 I'm facing an unexpected problem. There is no matching resolution. DVDs use 720x480 (NTSC) or 720x576 (PAL) but in the convertor I cannot find matching resolution in mp4's container for H.264 MAIN nor BASELINE
nor HIGH profile encoders.
Is this a X5 implementation error or a 'feature' dictated by a standard.
I am trying to convert from CDR to EPS because the print shops in my country don't use CorelDraw.
The thing is, what shall I do before converting from CorelDraw? I exported it and saved it as EPS, I tried the same as PDF then opened it with an Adobe Illustrator and saving it to EPS but as you can see in the attachment, they are different, even the pictures that I imported while using CorelDraw, they became blacker!
I have upgraded my Adobe reader to XI and when converting DWG to PDF the files comes out very heavy (heavier than the DWG!) and all curved lines comes out very very light comparing to straight lines.
View 2 Replies View Relatedi drew and sliced a layout in ps then put save to web or whatever and set to png then loaded in dreamweaver but whenevr i view it in dreamweaver it is too small like white on the isdes and whenever i size it to be right for half screen ufllscreen doesnt work and vice versa.
View 9 Replies View RelatedI have just started using v2012 from a 2008 version and whilst i had no problem converting to pdf before I now cannot do so. The command acad.pat cannot find file appears when i load up Autocad and since i don't understand the consequences of this I just cancel the window but when I try to PDF a DWG the same command appears so I guess it is quite an important file that is perhaps missing. Do I need to reload the software or how do I resolve this.
View 9 Replies View RelatedI was giving the task of converting DWG files to DXF. Here's what I have question on.
1. The DWG file was created with certain formats such as text, arrow, lines types as well as the drawing being in a diff scale, ex: 2:1. Later changed to 1:1 for the DXF file.
2. When I convert the file, which was straight forward, no I lost all my settings as describes above. For ex: I have some dims with tolerances, but now gone.
3. Is there an EASY way of changing the DWG to DXF without losing any formats?
I have attached a screenshot of a drawing converted to DXF and not re-sized and the other re-sized 1:1
how to convert .obj to .mb?
View 2 Replies View RelatedI made an animation, and let's say I got it to look good at 15 FPS. I go to save it as an animated GIF, and that's in MS. How do I get the right MS to get 15 frames per second? and what's the conversion amount for other FPS numbers?
View 3 Replies View RelatedIs it possible to convert TTF fonts to shx fonts?
View 3 Replies View RelatedI use Linux Ubunto and enjoy making small animations with GIMP. How I can add sound to gif files? I'm assuming I need to convert the gif to avi or similar. I've done a Google search but not come up with anything that works.
View 2 Replies View RelatedI recently designed a logo for a client that included both a gradient and transparency. I flattened the transparency, expanded the strokes and embedded the text before saving a copy of it in .eps and another in .pdf (PDF/x-1a:2003)
When I opened both files in Preview, I found these two problems:
I didn't have this problem when I saved the file in other formats (.jpg, .png) Also, while I'm here, is PDF/x-1a:2003 preset optimized specifically for printing?
I'd like to purchase a website template online which denotes that I'd have to use Adobe Illustrator, Freehand, or CorelDRAW to implement it. There's just one problem - I can't use any of these programs. As a matter of fact, I would like to use the template that I found with a "drap and drop" website builder, as opposed to coding. I was thinking, "What if i could covert an entire Ai file to a folder of PNG's?" ..then I could just manually build my website using those PNG's. Is this type of conversion even possible?.
View 11 Replies View RelatedI can't seem to figure out why the illustrator file opens blank if photoshop. I tried converting to EPS and PDF and even Ai CS3 but the file is opening blank. The pdf file also saved as blank document.
View 5 Replies View RelatedThe other day I was importing RAW photos and a message said that it did not import all images to DNG. Then, it shows the images imported as JPG. I would rather them be saved in NEF and converted in DNG. Maybe it was a button I pressed.
View 4 Replies View Relatedso many tools and option here, and yet I can't seem to figure out how to convert old PCD files! Do I really have to buy something like Graphic covnerter to open these, and then move them into PS?
View 2 Replies View RelatedThe web gallery function in CS5 seems to be completely different in CC.
Original system was Windows XP 32 bit with CS5 PS, that crashed and setup a new system with Windows 7 Pro 64 bit and Adobe CC.
The AOM was installed (Adobe Output Module), which apparently is the new web gallery function.
My question is, can the previous data from the CS5 Web Gallery be migrated to the AOM in CC ?
So... I am a bit of an amateur and have been shooting all of pictures in jpeg format. I use Lightroom 4 and Photoshop Cs6 for editing them. I am finally making the switch to raw format. I would like all of my pictures to be in raw or dng to work better with lightroom, so here is my question. Is it possible to convert jpeg fies to raw or dng? Would it be a stupid idea to batch convert all of my jpegs into raw format? Is it even possible?
View 5 Replies View RelatedI just downloaded a St. Patrick's day background from i Stock Photo. Nice vibrant green. We all know when converting to CMYK from RGB, there is a color shift but this is pretty dang dramatic. Any basic tips on getting some of that vibrant color back after converting?
View 4 Replies View RelatedI am trying to create a header for my e newsletter in Photoshop. I want to put the logo on top of a background of the same color as my logo. I have the CMYK ref for the logo, and this looks fine when I print it out. However, when viewed online or just on the computer - the background red is slightly brighter than in print.
I have tried using an RGB converter to change CMYK to RGB but this hasn't done anything.
If I have a bunch of jpg's and want to convert them all at one time to PDF's in CS6; how do I do that?
View 1 Replies View Related