Photoshop :: Squashed Image At 800 X 600
Aug 21, 2007
how I go about saving an image at 800x600 as every time I try to do this it looks "squashed" Lol...
E.G
I take my image, crop it just at the edges, add whatever effects I want etc, go to "Image" then "Image Size" but this is where my problem begins...
In Image Size I would like to make my image as I said, 800x600 (maybe 800x640) (pixels Lol) but when I untick "Constrain Proportions" and enter these sizes and click OK my image looks squashed in at the sides...???
Lost...?
I`m using CS2 and complete newbie to it so bare with me please. I`m also on a widescreen LCD 1680x1050 just incase that matters... (as I take screenshots of sims etc too)
View 4 Replies
ADVERTISEMENT
Jan 13, 2013
making my desktop icons. I stated out with either a jpg or png image. Using gimpshop I get the image resized and it looks fine. However, after exporting as an ico the image is very recognizable but shorter and fatter. I use to use photoshop so with gimpshop I look for something that said retain aspect ratio but as of now I haven't found it. It seems to adjust both width and height when I scale it but something happens during the export.
View 4 Replies
View Related
Nov 18, 2011
When in print preview the image is squashed horizontally.
View 2 Replies
View Related
Dec 11, 2007
I am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.
View 1 Replies
View Related
Jun 20, 2013
I have cs5.1 and when I convert an image to cmyk and save to tiff the saved image grays-out.
View 2 Replies
View Related
Nov 13, 2012
I'm trying to combine a monotone image onto a grayscale image to use in my Indesign file. The whole job has to print two colors.
How can I easily make the diaper a PMS color and add it to the grayscale baby and still maintain two colors (PMS + K)
Right now, I'm cheating and combining the PMS diaper onto the grayscale baby in Indesign..... but I really need to have this in Photoshop so I can add shadows to make it more convincing. I tried converting the grayscale to CMYK and deleting all channels but black, didn't work as it took away all the information from the image.
See image below.
(using CS5)
View 1 Replies
View Related
Sep 12, 2013
The entire image is what is blinking, while the photoshop tools remain on.
View 5 Replies
View Related
Jun 4, 2013
I am trying to find a faster way to save my images. I shoot in raw, save raw images as jpegs after editing them in Camera Raw. I am using Photoshop CS6 on a Mac version 10.7.5. When I save, I either have to save as a copy of the exisiting image, or replace the image I'm working on. Other forums I've read said to make an action to save and create a function key to make this process faster, but my function keys aren't working, and playing the action I've created still makes a copy of the image.
View 3 Replies
View Related
Jul 19, 2012
I have an action in which it will place an image onto an image like a watermark, when i place the image, it is not center by center so i drag it or use keyboard arrows to center and then press enter, then i saw its on the center, but when i save it, the saved image is not on the center, how was that?
you can see that the right side of border it is not centered because the left side border is thicker than right side, here is the part of the action
you can see that i move the image after i place it because its not on the center so adjusting it makes it at the center but the Translate part is not equal.
View 18 Replies
View Related
Jun 14, 2012
I would love to be able to export my image from 3d spherical panorama back to the complete Image. Raster image clips the image. Photoshop 3D is great for retouching the nadir (bottom) a spherical panorama image.
View 2 Replies
View Related
Nov 8, 2013
All the JPEG images I have converted from cr2 are grainy. I am converting them by Image Processor.
View 1 Replies
View Related
Jun 11, 2013
How to change the view in CS6 so that it is as sharp as my email program?
View 20 Replies
View Related
Apr 19, 2013
When I make a print from CS6 the image on paper is narrower than the stated dimension in the program. The height of the image is faithfully reproduced. I know that there must be a preference setting to correct this but I can't remember which one it is.
View 8 Replies
View Related
Feb 22, 2006
Is there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies
View Related
Aug 7, 2013
I am trying to take a handprint such as the one below and change the color of the handprint to say a light pink (or any color) but I want to keep most of the detail of the fine lines that make this handprint unique. The lines could even just come out as white as below. The main thing is to change the overall color while maintaining the fine details. I have been trying to accomplish this for over a week now in Photoshop Elements 11 and I have been unsuccessful as anything I do just totally color fills the image, which does not keep any details of the handprint.
View 15 Replies
View Related
Sep 4, 2013
I want to copy one image and paste it into a selection (masked) of another image. I have the option to paste into which works but would like to be able to paste in Place as I believe this makes it a smart object and references the original file.
View 5 Replies
View Related
Sep 23, 2013
I photographed a framed painting that, despite my best efforts, came out as a trapezoid rather than the rectangle I intended. The image has a slight taper in the sides going from top to bottom. The top of the image is 100% of the canvas width while the bottom of the image is perhaps 95% of the canvas width, so it is close to a true rectangle but not exact. What that means is that the bottom of the photo needs to be stretched by about 5%, the middle needs to be strecthed by about 2.5%, and the top is OK as is. Naturally, the amount of stretch required becomes progresively greater when going from the top to the bottom of the image. I'm new to Photoshop. Is it possible to perform such an image manipulation?
View 8 Replies
View Related
Feb 19, 2013
I'm putting together a series of images, and I want the horizon line to be a constant from image to image, though they were not that way in the original files. I'm assuming that I should go with the picture that has the smallest distance from the bottom of the picture and then crop the others so the distance appears to be the same in them as well. But is there a way to make that a simple process?
View 1 Replies
View Related
Aug 31, 2013
Was really wanting to get the first image at the end of a spotlight inserted in the second image of the city off in the distance. Kind of like how the batman symbol is in the spotlight. The symbol is my churches logo and was wanting to use it for our Instagram.
Attachment 36457
Attachment 36458
View 5 Replies
View Related
May 12, 2009
A while back I took a Photoshop class and remember a lesson on where you could select a region of an image and save it for the web with a high quality and select another region of the same image and save it for the web with a low quality, so that the focal point was saved with a high quality and the background was saved with a low quality. I have no idea where my notes are from this class and can not remember at all how to do this. Can anyone direct me to a tutorial about this?
View 2 Replies
View Related
Jan 28, 2004
how do I stop an image aligning itself to the edges of the image area.
View 2 Replies
View Related
Aug 30, 2007
i used photoshop to design the website sliced it with image ready and imported as html..but then i check out the website some of the image is pixelated..how can i fix it.to view it as the same thing as i see it in photoshop while designing?
View 9 Replies
View Related
Nov 22, 2013
using element 11 after opening a raw image the raw image editor will not open
View 3 Replies
View Related
Nov 27, 2013
This Q must be very old. Why can´t someone invent a sigle button for this I have tried all the things by the book but still when I try to lay text image with white background over an image the white is still there althoug I made it transparent. tried to sa for web as png-8, png-24 and gif. nothing works. To use magic wand gives bad result when applied to text? So what can I do? I am trying to place text over image. I know I could write it over the image but I need the text as a transparent layer some place else.
View 6 Replies
View Related
Jun 20, 2013
In Elements 3 I could clone parts of one open image to another image. How do I do this in Elements 11?
View 2 Replies
View Related
May 14, 2012
How to transfer the bird in image one to the backdrop in image 2? I don't have a preference to where; what ever might look good or be easiest.
View 4 Replies
View Related
May 1, 2013
I am really new to photoshop... i have been trying to make vector art from live images but failed ...make this given live image like the another image which is vector.
View 3 Replies
View Related
Feb 6, 2013
I am having trouble with Image/Resize/Image Size in PSE7. In the past I had a document size of 4x6. When I wanted to reduce the # of pixels, I just entered new #s and the document size remained the same. A couple days ago I changed both the document size and canvas size. I cannot get my old settings back. I even uninstalled and reinstalled the program, I also have PSE11 on a trial basis and it also only sees the changed settings. I've tried changing Scale Styles, Constrain Proportions & Resample Image, in addition to changing the Canvas Size but cannot get it to work like it did before I changed the settings.
View 6 Replies
View Related
Mar 5, 2005
In Adobe Illustrator. How to you stroke an image so the stroke is outside of the path line? Not ontop of it.
View 7 Replies
View Related
Jan 2, 2006
I've heard a rumor that I can select an area of an image and make it into a link. I've tried to to select an area with the marquee tool and then I click on the little orange feather in the lower right of the tool box. I've tried to paste my desired URL into the web link field but I can never get it to work. Can this really be done? How does an image with a link get saved? Jpeg?
View 3 Replies
View Related
Jun 13, 2008
I have completed a project and I need to verify that, based on what I implemented, image should be resized but quality of image (both JPEG and GIF) should not be reduced.
My question is it possible to verify the result using photoshop or some other tools? How?
My college said it is hard to check if an image looks different because of image resizing or because of quality loss or because of both. He said I have to create some log files to trace the result. It is a little too much work for me.
View 1 Replies
View Related
