i go to edit my text in photoshop CS2 v9,
"editing or rendering the text layer "text layer name" will cause its layout to change"
"CONTINUE?"
How do i stop that from popping up?
also, everytime i open up a design i have made, it has little yellow triangles with exclamation points in them on the text box in the LAYERS window.. What the shit is with that?
I'm running on LR 5.3, but this problem persisted in LR 5.2. Working in PS CS6 and Camera Raw 8.3. RAWs are NEFs from a Nikon D600.
I can't figure out what happened but suddenly I am not getting prompts when moving from LR to PS to "Edit Original" or "Edit a Copy".
I reset all dialog warnings and nothing. The prompt will appear for TIFFs but not for NEFs.
It's kind of pointless to not be able to choose to edit an original or copy with LR adjustments for a RAW when they are the file types that retain my RAW editing information.
Plus, when I do click on a NEF and choose to edit in PS without the prompt (it will appear with lightroom adjustments, not as original), it will open a second icon for photoshop on my dock, and prompt me to continue trial? I have a version of PS installed with the serial plugged in, and in LR "edit in PS" for a TIFF will open this primary version.
How do I prevent "Edit Attribute" pop up prompt for entering text for an attribute in a block? I just want the same attribute text each time I insert the block, I don't want the "Edit Attribute" popup window to re-enter the same text every single time.
I do want the attribute text so mirror won't reverse it (I just want permanent attribute text).
First I delete the old regular text.Second I give the block an Attribute Definition Tag and enter the text I want in the Tag blank. Third I center where I want the text. Forth I save the block.
When I finally insert the block I get the "Edit Attribute" pop up to renter what I want it to say. Like I said earlier, I don't want this pop up, I just want to enter the text once and that's it. Also if I enter nothing in the "Edit Attribute" pop up, then no text will show on the block.
I am trying to access the edit original (edit with) option to edit a photo that has not been edited yet. I right click and go through the edit menu and does not appear or is not available? Would I have to reopen it manual in photoshop or is there a way around this to access that setting? it sometimes does not appear on my already edited photos.
I would prefer not to open each photo again, as some files i do not have and were imported into the document with another computer.
How do I stop the Adobe Product Improvement Program prompt from coming up every time I open Photoshop CS5 on my Mac, even after I have responded that I do not want to participate? This is becoming very annoying and I have looked on line for a method to turn this off without luck.
View 4 Replies View RelatedI just upgraded to X6. My previous version of CorelDraw used to prompt me when I tried printing a landscape oriented file without changing my printer setup to landscape. This version just goes ahead and prints without matching the paper orientation. I can't tell you how much paper I've wasted!
Is there a setting in X6 that will cause the program to tell me when the project's orientation doesn't match that of my printer setup?
I am trying to come up with an easy way to input information for basic objects that we need for sales drawings. Is there a way to create a prompt(length, width, Diameter etc.) so when you open the .ipt it pops up? Anything a little more organized than the parameters box? I've done an excel sheet in the past for certain things, but didn't want to carry and excel sheet over for this option.
Inv 2011
Windows 7
Inventor 2011
Intel Core 2 Duo 2.93GHz
8GB RAM
Windows 7 Pro
How can I add a rule so everytime I open a new .ipt the user have to type the file title and when saving the file the name of the .ipt is the same the promted entry?
Is it something like this?
Filename = iProperties.Value("Filename", "Title")
Filename = InputBox("Please type title", "Title",Filename)
I have the rule tp tripper when I open the file.
The studio I'm working is an early MAX 2012 adopter and, overall, I think it's better than 2011 but still not rock solid or bug-free. Let the hotfix-fest begin.
What I'm wondering is: why is it always prompting me if I want to save the changes made to the materials libraries I've opened (even if I haven't made a single change...) on exit, after the save file prompt?
This is getting ridiculously annoying since I sometimes open up 20-30 material libraries per scene and it asks ONCE PER EVERY LIBRARY (and can't seem to find an option to remove the prompt or "never ask again" tick)
Also, this happens with the simple/classic material browser (can't see why slate is so great...)
how can I open file acad.pgp from the command prompt, without going through menu Tools ---> Customize ---> Edit Program Parameters
View 9 Replies View RelatedI have created a block attribute, but I want to be able to set it up so when I insert the block into my drawing, it does not prompt me to input a number in the Edit Attributes box.
View 5 Replies View RelatedIs there a method available to have the plugin pause and wait for a user to click some object, then continue? Or does all user interaction have to happen before/after the plugin is run?
View 2 Replies View Relatedhas something changed in 2011 controlling prompts to save pdfs when publishing from sheetset manager?? im using page overrides, which uses dwg to pdf.pc3 file. it publishes but no prompt for file name. i have checked the sheetset publish options and it is set to multiple & prompt for file name, however it still doesnt prompt and saves it in the folder nominated. where else is this controlled?
View 6 Replies View RelatedI have the following command in my VBA routine:
ThisDrawing.Utility.Prompt vbCrLf & "ABCDEF"
When I run my VBA routine from the VBA editor, the command appears in the text window of AutoCAD the way it should, but when I run the routine with the VBAload - VBArun commands (automated on a toolbar button), it does not. Do I need to obtain the AutoCAD object and issue commands that way instead of using the thisdrawing.utility method?
I'm creating a VB.Net routine which will run the REVCLOUD command. In my application I prompt the user to select a single polyline using:
EntRslt = acDoc.Editor.GetEntity(EntOpts)
Then later I run the REVCLOUD command using:
acDoc.SendStringToExecute("_revcloud Object Poly No ", False, False, True)
Where Poly is the polyline I selected earlier. Of course, the line above doesn't work since "Poly" is interpreted as a string. But I would like to figure out how to pass my VB.Net selected Polyline into the REVCLOUD command.
How I might do this? The REVCLOUD command will not accept the "Previous" selection set so setting the Implied Selectoin does not work. If my Polyline was the Last object in the database I could use the "Last" option, but it isn't.
Is there a way to have AutoCAD prompt the user for the name and location when Batch Plotting using DWG 2 PDF?
Currectly I can set the default location in the Publish Option by Naming and Mane are Greyed out and set to N/A.
I am able to set the Auto Publish but that only does a single sheet.
My command prompt window position moved to top left corner. Want to move back to bottom left corner.
View 1 Replies View RelatedWhat or where is the setting to change the dimension value input to automatic rather than accepting the default every time I put a dimension in? I don't want to be prompted for input.
View 8 Replies View Relatedyesterday when I clicked on "Derive" while in a part file I would get a browse window to select the part I wanted to derive, after this a prompt would come up that asked if you wanted the part to be a surface or a solid, if you wanted to scale it, etc. For some odd reason today when I tried to derive a part it doesnt come up anymore. After I select the part it just gets inserted and to keep it I have to hit enter or right click and select "ok". Not sure why the prompt stopped popping out, havent changed anything.
Inventor Professional 2013
Autodesk Inventor Professional 2013
I am wanting to copy the behaviour of a built in function in Civil3d on another object basically information on the object is displayed in a box next to the cursor cros hair but its not a tooltip.
My question is what is it and can you access it for do you have to create it yourselve.
I've noticed this annoying trait in AutoCAD 2012 when drawing a polar array that I hadn't noticed in previous versions. I used to get stuck in a loop having to repeatedly enter the number of items in the array trying to get it to move on to the next command prompt of what angle of fill I required.
Example
CMD = Enter number of items or [Angle between/expression] <4>:
<Type in 20 and hit Return key>
CMD = Enter number of items or [Angle between/expression] <4>:
<Type in 20 and hit Return key>
CMD = Enter number of items or [Angle between/expression] <4>:
<Type in 20 and hit Return key>
Ad infinitum...
I then discovered that this only seems to happen when the cursor is left over the centre of the array you clicked on. But if it's moved to one side the correct command prompt follows the Return key. This isn't intuitive as you have to leave go of the mouse to input the required number at the keyboard, so it tends to be wherever you just clicked, and you end up in the pointless loop.
I wan to turn this prompt off...period. Not fix it, just turn it off.
"The location of the selected file is not in the active project. To ensure that the file can be found when you open files that reference it, add the location to the project or move the file to a location specified in the project."
Looked through options, changed approproate setting to "Never". Still prompts.
How could I prompt a "two points" line entity from the user?
Something similar to " Editor.GetPoint() " ??
I was trying to use Editor.GetPoint() method two times. But this option does not show the preview of a line.
I also tried a combination of
doc.SendStringToExecute("line ");
db.ObjectAppended += new ObjectEventHandler(LineAppended);
but this option triggers LineAppended event handler as soon as I create the first point of a line. So it does not work.
I'm running AutoCAD LT 2011. As a test for myself when i first started using the program I created a block in which i have a rectangle and a linear stretch pair parameter attached to it, and a field attribute referencing the distance that the stretch parameter is stretched out to.
I'd like to know if its possible to set up a prompt when inserting the block into a drawing that allows me to type the desired distance of the stretch parameter and have the rectangle stretch to the entered distance as its inserted.
I'm trying to automate the process of simply inserting the block and then dragging the grips of the parameter out or updating the distance via the properties panel.
Is there a quick way to change the prompt text in an attribute? The only way I can see to do it now is to explode the block, edit the attribute text and change what I want the prompt to say, then recreate the block, which usually has the side affect of moving my attributes order.
For example:
I have an Instrument device block with 2 attributes, the first being the device tag, and the second being the device number. When I first created the attribute definition for the device tag, I defined it as:
Tag: Device_Tag
Prompt: XX
Default: XXX
But I now want to change the prompt to be:
Prompt: Device ID
I have a macro that changes the active material for each member of an ipart (this is done when i am editing the iparts).
My problem is that it constantly prompts that the table differs from the part and do I want to copy the information back to the table.
I want to stop this prompt and have it automatically set to "Yes". I can use the silent operation option but it defaults to "No" for some reason which makes the macro go to the next member without setting the material back into the table.
I have this working without the prompt, if I under manually the margin via var margin = 10; it works. it also seems to return correctly when I print what the input from the user is, but it doesn't seem to want to work and freezes.
it says "point value expected"
//Helper functions
function print(i) {
if(i == "object"){
print("you are trying to printObject, use printObj(); function");
}
else {
$.write(i+"
[code]...
I need to call the .js file through command prompt. And also through programming language like c++, java. This is for "illustrator cs".
View 5 Replies View RelatedI am trying to find an ilogic for part proparty entry as soon as I create new part/assy.
I know it is possible by Event triger-> New Document .
I've been going through some examples on [URL] to create polylines and i've managed to make some code run. One thing that I can't seem to find information on though, is how to use the default AutoCAD command line options in my code. For instance, I would like to be able to prompt the user whether they would like to snap the polyline to an insertion point, everytime they create a new verticie.
Below is some example code from the site that i'm working from:
namespace MyPlineApp
{
public class MyPlineCmds
[Code].....
I am going to be saving a template with one of my custom frame profiles from the content center already placed in it. I'll place it say 100" long, just an arbitrary number. How can I create a dialogue that pops up when I open the template file, it asks me for the value of 3 variables, then changes the length of my content center frame rail to the sum of those 3 variables? I've seen pop-ups before and know how to set the rule, I'm just not sure how to change the parameters..
View 5 Replies View Related