I have a macro that changes the active material for each member of an ipart (this is done when i am editing the iparts).
My problem is that it constantly prompts that the table differs from the part and do I want to copy the information back to the table.
I want to stop this prompt and have it automatically set to "Yes". I can use the silent operation option but it defaults to "No" for some reason which makes the macro go to the next member without setting the material back into the table.
the newest model I have made I have run into some troubles. When I switch between one member and another most parameters update correctly but the part is still requiring an update before the finished part is created.
When the feature small sheds is enabled the pattern isn't working correctly.It seems as though the height that controls the sheds is not updating during the member change process and is causing the pattern to be the wrong length.
I have set up a form to add my parameters as there are a large number in the ipart table.I can't generate my member files as they show the member before it is updated and is wrong.
I made a drawing, inserted a base view and selected an ipart member, in the Model State tab of the Drawing View dialog box.
Now i made a change in the model, one that is enabbled in the ipart member, one that i should see in the drawing, but i don't see the change. the drawing represents the part as i inserted it at first.
Now i found a workaround, i edited the view, chose the active member, which is the previosly selected member, now it updated, but the center lines became pink. now i changed back to the firstly selected member and it updated, but i am sure there is a better way
I have two tables on a drawing one showing a parts list the other changes to dimensions.
The table to show the dimension changes is a configuration table pointing to an ipart.
iLogic is used to update the ipart but you have to right click to update the Active Member in the ipart to see the drawing update.
Is there a way to automate the 'update active member'? (on the ipart table - this does update the drawing)
I just have the one row in the table, it's purpose was to pass the values onto the drawing (as the part resizes I didn't want the dimensions moving so opted to tabulate them) - hoping they would update!
or
Is there a way to have a table update parametrically i.e. I've tried .csv as a source to the table but can't force an update. This way I could scrap the ipart & just import the values to a table.
The table also includes some txt comments which change with the ipart properties.
I have some manufacturing dimensions that are an end result of my design so they are driven dimensions at the end of my modeling history and pulled into the ipart table. If I make some design changes I need these dimensions to update too. The problem is they do not automatically update and require a manual activation of each child memeber for the dimension to update.
The dreaded "The Values in the active row don't match the document's current values. do you wish to update the table before continuing" Click, enter, Click, enter, Click, enter.
Autodesk Inventor 2012 Certified Assosicate Autodesk Inventor 2012 Certified Professional
I am trying to come up with an easy way to input information for basic objects that we need for sales drawings. Is there a way to create a prompt(length, width, Diameter etc.) so when you open the .ipt it pops up? Anything a little more organized than the parameters box? I've done an excel sheet in the past for certain things, but didn't want to carry and excel sheet over for this option.
Inv 2011 Windows 7 Inventor 2011 Intel Core 2 Duo 2.93GHz 8GB RAM Windows 7 Pro
How can I add a rule so everytime I open a new .ipt the user have to type the file title and when saving the file the name of the .ipt is the same the promted entry?
Is it something like this?
Filename = iProperties.Value("Filename", "Title") Filename = InputBox("Please type title", "Title",Filename)
yesterday when I clicked on "Derive" while in a part file I would get a browse window to select the part I wanted to derive, after this a prompt would come up that asked if you wanted the part to be a surface or a solid, if you wanted to scale it, etc. For some odd reason today when I tried to derive a part it doesnt come up anymore. After I select the part it just gets inserted and to keep it I have to hit enter or right click and select "ok". Not sure why the prompt stopped popping out, havent changed anything.
Inventor Professional 2013 Autodesk Inventor Professional 2013
I wan to turn this prompt off...period. Not fix it, just turn it off.
"The location of the selected file is not in the active project. To ensure that the file can be found when you open files that reference it, add the location to the project or move the file to a location specified in the project."
Looked through options, changed approproate setting to "Never". Still prompts.
I am going to be saving a template with one of my custom frame profiles from the content center already placed in it. I'll place it say 100" long, just an arbitrary number. How can I create a dialogue that pops up when I open the template file, it asks me for the value of 3 variables, then changes the length of my content center frame rail to the sum of those 3 variables? I've seen pop-ups before and know how to set the rule, I'm just not sure how to change the parameters..
Our Engineering department just switched over to Product Design Suite 2014 and Vault Professional 2014. The entire vault database was migrated during the upgrade process, which is fine but It now causes me an annoying issue. Every file that was migrated and has not yet been opened with the new software has this prompt that alerts me that the data format has been changed. Is there anyway I can turn off this prompt? I know the files have been migrated I really do not need to be reminded everytime I open a file its very irritating and is not a necessary step in my opinion.
Work Station : Dell Precision R5400 OS: Windows 7 Business 64 Version 6.1.7601 Service Pack 1 Build 7601 Processor Intel(R) Xeon(R) CPU E5405 @ 2.00GHz, 1995 Mhz, 4 Core(s), 4 Logical Processor(s) BIOS Version/Date Dell Inc. A10, 4/30/2012 Graphics Display Card: ATI FirePro V4800 (FireGL V) 1.00 GB Adapter RAM Computer Memory: 8 GB ECC RAM
I made a change to my materials library. I changed the color (from dark grey to light grey) of one material. I then saved this back to my library.
Now, when I start a new part, I get a warning that the material does not match the library. So, rather than using the material in the part, I opened the template and updated the material to match the library. (Manage >Update Styles).
This is where the problems come into play. In the update styles dialog, if I compare materials against my custom materials and then compare it to my Favorites, it just a continuious circle. It is like the favorites are stored inside the part and do not get updated to match the custom materials library. (I thought the whole idea behind using a library was to get the information out of the parts).
Here is a short video showing what it does. [URL] .....
The only way I can get the favorites to match is to delete the favorite material, update the style and the add the favorite back in. That is a bunch of work. The problem I got with this is that there are thousands of parts that have been created that has this favorite in it. The only way to update these is to open each part (if I knew which one), delete the favorite, update the materials and then add the favorite back in.
I am interested in Learning about Ilogic and the Itrigger. I worked at a company where they had a prompt that would change, size, material, hole quantities etc. I am trying to recreate that for a cabinet but cannot seem to find a good tutorial, I know I need to write some sort of rule to do this but cannot find out specifcally how to do so.
when I use GoExcel.CellValue (or other similar Excel link) snippet in iLoggic to write on a Excel sheet, I get a save prompt for the respective Excel file.
Working in a assembly and just edited an existing note in the Engineering notebook. Clicked the "X" to close the assembly.... what? no prompt to save the file?
Just checked adding a note to a ipt and it doesn't dirty the file either, so if you only add a new engineering note, you have to save it, cause it won't prompt you before closing.
How do I change the BOM structure of iParts from Normal to Purchased? The BOM editor in the assemblies that use the iParts have the iParts as read only. I can't find a way to change them to purchased from inside the iPart either.
I've made a component pattern in an assembly using an iPart. The iPart as several different lengths, but I cannot switch lengths in the assembly. In other assemblies, right clicking on the Table icon allows me to change lengths, but this assembly will not.
In C++ can I use this function, using the key index Member string to select which row in the factory I want to insert?
In the docs all I see is Use an iPartTableRow (but no examples in C++).
Use an index, this works but I need to know the index before using it.Use a set of parameters in a string (but "[Member=142314]" does not seem to work. Can I not simple use a string with the appropriate member?
Can I use diferrent types of threads (as variants), in one iPart/iFeature file, ex. M10x1.5 (ISO Metric profile) and G1/8" (ISO Pipe Threads)? Look at the file in attachment and correct it if possible.
I have created an ipart and want to create a right hand and left hand option of that part. I can mirror the features involved and suppress the mirror feature for the the RH part and so the RH version looks fine.
BUT if the mirror feature for the LH version is in the compute state I get both handing showing. How do I suppress one handing and leave the other for my RH version.
Is it possible to add a Appearance tab to a Ipart table? I am cataloging a set of parts and one part is made with steel but in Gloss - Black and Matte - Black and i'd like to differentiate the 2 without haveing to make 2 seperate Ipart files.
I have listbox that shows ipartname of one ipartfactory it would like and me that when selecting one of them it could send to the assembly ipart selected hear show code.
Dim InvApp As Inventor.ApplicationSet InvApp = GetObject(, "Inventor.Application") Dim IpartSeleccion As ipartMemberSet IpartSeleccion = listbox1.Value Dim oDoc As AssemblyDocumentSet oDoc = InvApp.ActiveDocument Dim oOccs As ComponentOccurrencesSet oOccs = oDoc.ComponentDefinition.Occurrences
I'm trying to take multiple parts of the same type and make them into one .ipt I began doing this and It seemed to be working fine. When I put those grouped .ipts into an .iam, Inventor creates a Subfolder of each .ipt and fills it with each part from that group and now those created ipts are unique unlinked parts (unlinked to the group ipt). I'm trying to reduce our file count and link our .ipts and .idws/.dwgs so this Inventor file creator results in the opposite of what I'm looking for. My question now is is there any way to modify this process to work the way I need it to or is there a completely different way that I should be doing this?
