When working with painting in photoshop it would be so nice if you could have the colur palette open so you could just mix or change directly without having to doubleclick on the colour to change that.Is that possible?
View 7 RepliesWhenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies View RelatedI have lost white in the palette, when I type in 255,255,255 it should
produce white but I get a kind of beige.
Is it a fault with the monitor set-up or can I reset my palette.
greyed out
I've installed my copy of photoshop cs many times on my computer before but i recently reformated and this time my color palette isn't the same. as in all the colors are brighter then they should be (#FF0000) almost looks orange. When i try and open up pictures in ps, or old psd's it also makes their colors brighter and not what they should be.
I have not changed monitors or any other display settings. Its also not some stupid problem like RGB to CMYK or something. although im open to any suggestions because people make mistakes sometimes.
Also ive also noticed that this happens after i activate it. before i activate it the colors are fine but once the grace period ends and i have to activate through internet or whatever that when all the colours get brighter.
I've got a couple of questions regarding pantone colour selection.
Which pantone colour palette should I use if i'm to prepare a design for commercial printing; Pantone Solid or Pantone Process?
And when the printers say :"Pantone 185", which palette are they referring to?
why the colour pallete is greyed out on the tool bar and how to recover it?
View 9 Replies View Relatedsimple logo in blue and grey which we want to get professioannly printed. I don't know much about print, but I do know that until now with a .psd and a .eps I've always got my stuff done in acceptable quality.
Now the printshop seems unable to get the colours right. The logo only has 2 colours, blue and gray. For both I have given them specs in 5 colour models, such as this, and handed them the file in .psd, .eps and .ai:
R: 15
G: 106
B: 200
C: 80
M: 60
Y: 00
K: 00
HEX: 0f6aff
L: 48
a: 22
b: -82
H: 217
S: 94
B: 100
Now the blue they have come up with in a print preview looks absolutely nothing like this. And the grey is almost transparent.
They asked for Pantone colours. I created the logo in Photoshop, so all I have are these specs. Is it impossible to print a logo more or less correctly with exact values from 5 different colour models?
What can I do to convey them more or less precisely which kind of blue we want?
I have an image which I want to display using only a limited set of specific colours which I have defined in a colour palette. I am aware of the colour map plugin, but from what I can gather from the documentation it simply uses each pixels luminosity as an index. I want to to map each pixel to the colour in my palette that most closely represents the original colour. How do I do this?
View 2 Replies View RelatedWhen I set C to 40% and MYK to 0% the program automatically change to other values in all four columns. Is it some kind of default settings? If so, how can I change it?
View 3 Replies View RelatedIs there a way to copy/paste colour swatches or save them to a palette?
View 5 Replies View Relatedis it possible to open a photo of a patient with shades palette like on picture 1: and make a color analysis to see which part of a tooth has which color (usually tooth neck is darker, edge is lighter, sides are darker).
View 8 Replies View RelatedI cannot open the appearance palette from the window tab. I am able to open all of them except the appearance palette. I have dual monitors and running XP. Adobe illustrator CS
View 2 Replies View RelatedI've really tried to figure this out on my own – you'd think it would be simple. At some early point, before I was at all familiar with CorelDRAW, I closed the document palette, and ever since then it does not open automatically when I start the program or open a document. I have had to open it manually, and I can't seem to find a way to make it open by default.
View 10 Replies View RelatedFor some reason a Document Color Palette doesn't appear by default when I create a new document. It did at one time, but now I have to manually activate it. Not sure what I did to cause this change in behavior, but I'd like to get it back as a default.
View 4 Replies View RelatedI have my own Palette Set.
On this Palette Set I have a palette withe a tree.
On the right click of the node, I call a command (it's one of our own ObjectARX commands, but the problem is the same with a build in command).
The command wants the user to select a point, with a few options. If I first select a point (left click) and then click right, everything works fine.
But If I click with the right button, before I select anything, the menu is not shown.
The code for calling the command is really easy:
Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.SendStringToExecute("_ARC
",true,false,false);
As said before... I don't call the _ARC command... but for the arc Command the right click menu is not shown also...What can I do, to get the normal behavior of the right click?
Currently using 2013. In 2011 or 2012 when Anchoring Right (or Left) a palette Auto-hide has behavior that seems odd to me. If you click Auto-hide on an anchored palette to open it (and presumably keep it open) it detaches from the anchor. And then when you close it you lose the palette on the anchor. To me this wastes time. I'd like to keep that palette open to work a bit and not have to hassle with it by not having it open, but at the same time don't want to waste time later calling it up and anchoring it again. Is this still happening in 2013?
View 1 Replies View RelatedI try to open mulitple ai files through palette dialog but it fails on Error:8702, there is no document. But if i change to var win = new Window ("dialog", "Batch"); the open file works well.
var txtSourceFolder = win.add("edittext",undefined);
var btnOk = win.add("button",undefined,"Run");
btnOk.onClick=function(){
try
[Code] ....
I am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
Is this something that is possible? Basically I have an excel file with sample data that comes coded (red background for fail, Green for pass) Then we transfer that into halos on a DWG. got a routine to count the halos in a DWG. Now I was thinking it would be nice if it compared the number to the excel file to make sure no mistakes were made when placing the halos.
So as I mentioned I've seen rountines to read data in cells but none to count cells based on colour.
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies View RelatedI've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies View RelatedIs it possible to add the Properties Palette to a custom made palette set in .NET? And how to do this?
View 3 Replies View RelatedI wan´t to delete a palette from Autocad Tool Palette. How can I do?
View 3 Replies View RelatedI have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies View RelatedHow do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies View RelatedAdobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies View RelatedAny method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies View Related