I enter text rarely in PS (CS2) but have successfully done it. Recently I went to add text but either the text is not visible or has not been added.
I selected the horizontal type tool, clicked on image to get a new layer and place the I beam cursor (that changed to a small square on clicking). I typed text in 60 pt text, black, clicked commit and ... nothing.
The text typed appeared in the thumbnail but not the image.
When attempting to add text to a photo, the typed text is not visible on the layer in the "Layers Box" until exiting the Text Tool. Text nexer is visible on the photo Background image. If the edited image is saved, the added typed text is not saved; only the original Background image. How do I reset the Text Tool so it will be functional?
View 3 Replies View RelatedI have created my Animation:
The stage size you see above is H: 400px, W: 550px.
I would like for the stage to be smaller, say H:50px./W:400px
Ok so if I change the size of the stage the animation text will not show, so I need to adjust the position of the text in order for the animation text to be visible, but in doing that, I am disrupting the timeline and the animation goes all funny, is there another way of doing this without disrputing the timeline?
No visible Text in PE v6 on Mac 10.6.8. Other functions appear to work ok. Reinstall of program did not correct. Text may be selected but does not appear on work screen
View 4 Replies View RelatedI am trying to all a caption to a photo. I cannot get the text to be visible.
Is there a way to only use a single layer?
I converted from AutoCAD 2000 to 2014 and now when I open up my old drawings some of the text does not show up. But if I go back and open it with 2000 it is still there. I found that if I convert the text to mtext it shows up. Is there a setting in AutoCAD 2014 that I can change so that this text shows up? I tried changing the annotation scale to see if that would do anything but it did not.
View 1 Replies View RelatedThere's this GIF that I'd like to use for a banner and when I open the file in GIMP, add a text and then check the animation in the playback window, I can only see the text once the GIF has ended but also, I can only see the text for like one second.
Is it possible to make the text visible on all of the frames of the GIF without having to duplicate the text 100s of times and merging them onto each frames?
They are the only objects on this layer with which this happens.
View 6 Replies View RelatedCoreldraw X4 - Windows XP
When I enter text into a table cell all I see is a red dotted rectangle. Object Manager shows there is a Paragraph text object there. If I open it in Text editor tool the text I typed is there.
Why is it not visible on screen or when printed?. Paragraph text not in the table is visible.
I am using managed classes to insert multiple block references into model space. I wish to insert a block and then move it (change its Position) which I can do. The problem is that my attributes associated with this block reference do not move.
View 6 Replies View RelatedI have a inventor drawing where the text is not visible but shows up on the Print.
View 3 Replies View RelatedI do not have an Overset Error.
When I export my ePub, the entire text is visible But now that I am going back to edit this document.... Change some paragraph styles, The last 25% of the text in my document is NOT VISIBLE. TRUNCATED
I've been running AutoCAD 2006 since it came out and have been running it on Windows 7 since it came out. I've never had any problem runnning my LT version. Today, all of a sudden I cannot type text in the multi-tex box. The cursor moves in the box but nothing is shown. I click okay but cannot select anything. It's like the cursor is moving but not laying down text. I've changed the different fonts, colors and even changed my background from Black to While and still cannot see any text.
My single line text tool continues to work just not the multi-line text box.
I also tried restarting my computer and tried opening existing files. The multi-line box problem occurs on other files to.
there is already a style set from the file i'm using, when i am trying to get the measurements from the line to show up, they aren't doing so. how do i get it to show the lines when i modify the text and make it become visible?
View 3 Replies View RelatedApparently the issue has been happening since as far back as CS2. The flashing text cursor is only visible in the upper left hand portion of the screen. If the text your are attempting to edit is on the far right or bottom of the screen, the cursor vanishes. Some people have suggested zooming in and out, but this only appears to solve the problem because the art board may get nudged into the "good" portion of the screen. I did a screen shot and found that the cursor is only visible in about a 930p x 600p area of the window (not including toolbars). Incindentally, the is the same size that the window defaults to when initially opened. On a HD monitor, this amounts to a very small space.
View 9 Replies View RelatedI want to select all text frames on all visible layers. The script below will select all text frames even in groups but when a layer with text on it is invisible the script will error.(target layer cannot be modified)
if (app.documents.length > 0 ) {
var doc = app.activeDocument;
var numTextFrames = 0;
for ( i = 0; i < doc.textFrames.length; i++ ) {
textArtRange = doc.textFrames[i];
textArtRange.selected = true;
}
}
So I made this script to select text frames on only the visible layers but it now misses text that is in a group.
var layerCount = activeDocument.layers.length;
var docSelected = activeDocument.selection;
for (i = 0; i < layerCount; i++)
[Code] .....
Why it does not selected textframes in a group when done this way and is there a way to get all textframes selected on all visible layers?
I am trying to create a rule that if a certain property is set to Gx then certain text on a template becomes invisble.
I have created a Text style and thought the following code would suffice....
Format:HTML Format Version:1.0 StartHTML:
165 EndHTML:
1942 StartFragment:
314 EndFragment:
1910 StartSelection: 314
EndSelection: 314
SyntaxEditor Code Snippet
Ifz_ValueS="Gx"Then
ThisDoc.Document.StylesManager.Text("Standard").Visible=FalseEndIf
But alas it does not work. I guess I could create the text using layers and make the layers invisible but is it possible.
how to make make block attributes text visible next to my blocks?
View 4 Replies View RelatedI'm looking for the most elegant syntax to loop through a document and select all the text frames.
View 1 Replies View RelatedMy last step in processing is sharpening. After the application the photo does not look like it was sharpened. If I use my zoom button up one level than the photo is sharp. When I run slideshow in Bridge this lack of sharpening also appears here.
View 4 Replies View RelatedI am using ReFlow CC and PS CC. But not visible Generate. [URL]...
View 1 Replies View RelatedFiles saved from photoshop to a server in Mountain lion not visible. But when I save to desktop then move the file to the server, it recognizes that the file is there and I do an overwrite. Also happens with Illustrator files. Is this a MountainLion problem or CS6?
View 1 Replies View RelatedI've inserted some keywords into many CR2 images via Bridge. I then moved the CR2 amd XMP files separately in to the same folder. They keywords are no longer visible, but when I open the XMP file in notepad, I can see them. How can I get them visible in bridge again?
View 1 Replies View RelatedI add a watermark to all the photos I post to the web. I've (for years) used a transparent .png file and it's worked fine. Since starting to shoot with Canon Raw, I'm now doing the editing in CS5 for Windoze. (W7 pro 640 bit)
Since I've been unable to find a visible watermark feature in CS5, I've been dragging, then dropping the .png file on the edited image, placing it, then adjusting the opacity to a value of 5 or 6. That works out ok.
But when I drop the .png onto the edited file, its size is inconsistent. Well, it's consistent in that it's about 150 percent of what it should be. Both the edited file and the watermark image are 800 pixels wide. However, at what seems random frequency, the dropped image is about 1200 pixels wide, necessitating alignment and resizing before placing.
First, have I overlooked a visible watermark function?I know that's a loaded question, but if it's a method that should work, why is the dropped image inconsistent in its size? Next, is it reasonable to create an action to overlay the edited image with the watermark? I always use the same file, so it would seem like a reasonable thing.
I'm trying to import a couple of models from the google warehouse into Photoshop CS5 extended.
They open without an error, but aren't visible.
I tried following this KB article: [URL] ..........
The script throws a syntax error:
Line: 68
-> var Construct0r = function() { };
I've also stepped through the parts of the model in the 3d palette looking for elements that have the opacity set incorrectly, but they all seem to be set to 100%.
I see the kb article is from january 2011; Is there a newer version of that script
I have 10 equally sized layers in my document, each with a different image.
I would like to show a horizontal band (rectangle) from each layer. For example, I want Layer 1 to be visible from 0 in to 1 in., Layer 2 to be visible from 1 in. to 2 in., etc. Does anyone know easiest & least tedious way to do this?
I think this has something to do with masks...
what I'm trying to do is put a lablel on a picture, that only appears when people try to save the picture. I don't want the picture to have the annoying information of who did it and so on, but I would Like it to be visable when tried to be tampered with?
View 4 Replies View RelatedI am fairly new to more than the basic elements of photoshop. I am using 'Actions' to create a e-book cover and had my design created but when I pressed finalise iget the error box - The command Merge Visible is not available with two boxes continue or stop Clicking on either box produces no results.
My query how do I cure this please, I also notice that in the layer detail menu all but the background layer have disappeared. I have taken back steps and re-entered layers with the same result. Forgive my ignorance I am a silver haired surfer who was told it was easy to create e-book covers in photoshop.
I have a PSD with about 100 layers. When I use the select tool and press while holding CTRL (to activate "auto select layer") I sometimes select invisible layers.
View 9 Replies View RelatedI'm making some CD labels and I have a layer that had the outline of the CD label on it. I keep it up to make sure I'm positioning my items in the right area. I always leave a little bit past the lines in case the prininting is off a little bit.
Is there any way to get a displaying layer not to print?
When I try to use the "merge visible" and the inverse selection shortcuts they simply do not work or deselect the program. Is this a well known problem for win2000? as far as I know I haven't got any irregular keyboard settings or maybey 2000 has some flaws...
View 1 Replies View Related