The image I was working somehow saved in quick mode, and now no matter what I do, it's still red. When I turn off all the colors besides red, it looks normal but I cannot save it. In the layers palette, it is called Background and has a lock next to it.
View 1 RepliesWhen I enter into "quick mask mode" and paint in an area on my image that I want my selection to be, then enter out of "quick mask mode". The entire image is selected. It's like a did a "Command A".
Also how do you change the color of the "quick mask mode"?
Photoshop CS6, Mac.
i have 3 layers in photoshop. Backgroundlayer1layer2Now on layer 2 i did a selection and entered into quick mask mode and then applied gussian blur.
When this is done does the selection borders try to blend with the back ground or will they try to blend with the layer 1 as it is the layer just behind the layer 2. In case if there is no background, I mean if all three are layers then what happens?
the default colour and opacity for the Quick Mask mode? I was trying to find a way of resetting it and don't seem to be able to find such an option. I don't really want to trash my preferences file...
View 10 Replies View RelatedOk, so i'm trying to cut an image out in photoshop like usual, and i go into quick mask mode, make my selection, go back in to normal mode and my image that i need cut out is selected, nothing else. However, when i cut it out, it takes some of the image that i didn't select with it, but only parts of it and they are kind of transparent. Anyone know what the problem is?
View 2 Replies View RelatedI want to apply a suntan effect to a jpeg pic. When I click on the quick mask mode, grab the brush and start painting the mask nothing is happening?
View 4 Replies View Related I have recently installed Photoshop CS6 after previous happy experience with CS3. The software appears to be seizing up when editing a selection in quick mask mode (image or layer mask) under the following conditions:
- 64 bit mode
- image > screen size, especially at 100% maginification
- or image magnification adjusted whilst in quick mask
The red mask appears slowly and only where I move the mouse curser - but will not cover the entire masked area.The software freezes, and I have to kill the process from the OS. Task manager shows its status as 'running' and memory / CPU do not appear to be maxed out.
System info:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]...
trying to mask a certain area of a face with another picture, so I use the quick mask tool to paint in the area, but when I exit it and enter standard mode, there is nothing selected. It does however act as if there is a selection, because the other layer only is added to that section.
Also, I don't know if this is related to the other problem, but when I move another image into the original one to create two layers, then select the overlay blending option, I am happy with how it looks. However, after adding the layer mask, the other layer is really pale around the masked area.
For some reason my quick mask mode stopped working. I can go into quick mask mode. I can highlight what I want to select. but when I exit out to make the changes I wanted to, the only thing selected is the outside edge of the image I'm working on. So instead of having the extent of the image and the part I highlighted selected (basically everything except what I colored in QMM) only the extent of the image is selected.
I have even uninstalled photoshop, re-booted, and re-installed photoshop and I still have the same problem.
Every time I open a photo from explorer, Lightroom or somewhere else, Elements starts in quick mode. I never want qick mode, I want to use experts mode as default. How can I do this?
Plus, is there a way to get rid of the bar on top completely? It takes up valuable screen space and is completely useless.
I have a problem with this command : "Toggle composite and grayscale mask in Quick Mask mode"I know i have to press the tidle key " ~ " to activate it but i'm using an Azerty keyboard (belgium) and i have trouble with it.The only way i can use the tidle key on my keyboard is to press "Option + n" keys.
So in Photoshop, i load a channel selection, turn into "quick mask mode" and then press "Option + n", but nothing happens.If i try with "Command+Option+n", i open the window for a new document.I have tried ALL combination of keys but nothing worked.I have also tried to change the keyboard input to Britain, Usa, etc but it still doesn't work.
I'm using the english version of Photoshop CS6 (Subscription), and an Azerty Keyboard (Belgium) on a Mac Osx Snow leopard.How can i solve this problem ?
I have used PSE 5 happily and greatly liked the auto sharpen feature. I have been forced to upgrade to PSE 11 due to Windows 8 incompatibility with 5.
I am appalled to find that the sharpen feature, including auto, does not work in Quick or Guided modes. The small previews in Quick mode show the correct sharpening effect but clicking on them or using the slider does not transfer to the main image. I either have to go into full unsharp mask, which I hate for quick fixes, or use the 'adjust sharpness' option under 'filter' in Quick or Guided Mode, which increases sharpness by an unspecified amount on each click.
I'm trying to find a quicker way to create a mask. In the image below I am removed the white areas, and I use the magic wand with - (minus) selected, at the moment I have to switch between quick mask mode as to see what parts you have missed.
On the left you can see an area inside the object that has been removed and the part next to is white, I would like to be able to click this white area and it ruen red so that it adds it to the selection?
how this could be done or is there an easier way in which to do this?
I'm currently jumping back and forward between quick mask mode and my standard layer. When I am in the standard layer the brush tool is performing as it should, but when I go into quick mask it is erasing my selection (red) rather than filling in where I draw!
View 1 Replies View RelatedIn X5 (not in X4) when double-clicking on a thumbnail in the Organizer pallet, the BLACK control panel at the bottom appears, but the image is either Not There, or the entire screen is a Scrambled Mess! Sometimes (like in the morning after boot-up) it's ok, but other times (like in the evening) there is dysfunction and corruption. I'm wondering if X5 has a memory leak or problem? as I got a Blue Screen last night.
View 5 Replies View RelatedI am having NO PROBLEM creating a masked image by the use of the:
Eliptical tool >Quick Mask >Filter >Blur > Gaussion Blur then tweak up color and settigs as to the proper steps in the course.
When I get my image just the way I want it I CAN NOT "save" to any format that can be read by other picture viewers and still retain the mask.
I just got Photoshop cs6, and I am probably at intermediate level in expertise. When I try to use the marquee tool, the lasso tool or the quick selection tool on an image, the image just goes black. I have to click back to "Open" on the History the get the actual image back. I have Windows 7 64 bit. I have never had this problem with other versions of Photoshop.
View 4 Replies View RelatedWhat does the Quick Selection Tool do? I am trying to cut the white out of an image and trying to find the best tool
View 1 Replies View RelatedCan I resize a Quick Selected image so it fits when I cut and paste it on a new background? I am trying to take a photo of someone and place it on a different background. The Quick Selected image is too big when I paste it on the background. You can only see a small portion of the persons head.
View 2 Replies View RelatedI'm not sure exactly what I did to my photoshop. I'm use a MAC platform. This is what it looks like right now but I want to to go back to being like the image on the bottom. I think I turned on or off something but I have no clue what I did.
View 3 Replies View RelatedI'm trying to get use to this quick selection tool , i have an image i need in the middle of the photo and all round the sides i want to whiten, the tool once draggin down either side selections all the picture no mater what setting i use,
View 4 Replies View RelatedWhen I have a backgound selected with the Magic Wand Tool or the Quick Selection Tool and I try to delete it, instead of getting the white and gray checkered background, it brings up a "Fill" splash screen, why? I'm just trying to make an image transparent so it can be moved from one image to another.
View 1 Replies View RelatedI need to apply individual unique keywords to a large (1000+) set of images. Is there a faster way to advance to the next image after applying a keyword than using the mouse to select the next image from the library browser? A feature similar to the Shift>[rating number] trick to advance to the next image while assigning ratings?
My lack of knowing this trick is killing my productivity by at least a factor of two.
I need to know how to do the above procedure in lr5 as when i did the processing of one image i saw no tab to click to save the image or move the image or clicking done?
View 4 Replies View RelatedI traced bitmap -> Quick trace. Is there a way to edit that vector image now - with the shape tool?
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
How does one drag a layer from one image to another in tabbed mode?
I'm forcing myself to work with the tabbed image interface as I assume someone thought this new feature was a good idea.
I often drag or shift+drag layers from one image to another, whether it be adjustments or image elements that need to be placed (in register) as a layer in another open image.
But when I use the tabbed interface mode any attempt to drag a layer from one tab to another does not work.
It's not greyed out, it's missing. Using PS CS3, on Windows XP SP2 and working now in RGB for design, but need to convert to CMYK for printing.
I've done this a million times and this is the 1st time CMYK has been missing.
I changed the mode of a RGB image to HSB color model then copy and paste hue channel as a layer to the original RGB image ...After changing the blend mode of the hue layer to the hue blend mode..I can't see my original RGB image.
View 2 Replies View RelatedIn CS6, full screen mode, the image keeps moving up, down or to the side if my cursor gets too close to the edge of the screen. sometimes I'm not even at the edge of the screen but in the middle of the screen, I move the cursor right, the document goes to the left. In the old days the window stayed put unless you used the handtool to move it around. Is it possible to go back to this mode?
View 2 Replies View RelatedI have a high-res image of a model of a ship that I'm looking to put on top of a seascape image. The pictures below are a lot smaller and cropped then actual.
Here is a crop of the image of the ship, luckily it's on a plain background and nothing more complicated: After much trial and error, Fluid Mask did a decent job and I'm on the fence about saying useable:
However, this is a thought I had when scrolling through blending modes on the ship's layer. Here it is on Multiply:
Obviously it's too dark, but in terms of the edges on the small details like the ropes, it looks great. I got thinking about somehow automating Photoshop to recognize wherever a pixel is different from the background layer below it, Photoshop would be able to tell where the image is and where the background is, since Multiply removes any white but leaves other colors (albeit darker).
I don't know how this would be done if it's possible at all, I'm guessing with some sort of code made into a plugin or something.
I use Photoshop LE 5.0, which has many of the BIG Photoshop features.
If I take a web page screenshot and turn it into greyscale and print that,
I still get some colors coming thru on the printout, even though it looks b/w on the screen.
Is this a common problem? Photoshop or Printer or Windows?