Photoshop :: Getting Error CS3 Has Stopped Working?
May 15, 2012
I have been using Adobe Photoshop CS3 for a couple of years and for the most part haven't had any problems. However, when I tried to run the program today, the message "Adobe Photoshop CS3 has stopped working. Windows can check online for a solution to the problem." popped up, and I could not run Photoshop.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 10.0.0.0
Application Timestamp: 4601eae8
Fault Module Name: MSVCR80.dll
Fault Module Version: 8.0.50727.6195
Fault Module Timestamp: 4dcddbf3
(It also listed information for the Exception Code, Exception Offset, OS Version, Locale ID, and four different kinds of Additional Information, which I have not listed here).
I also suspect that I'm having the same problem with all of my other Adobe software (I have Adobe Creative Suite 3 Web Premium), since I am getting similar error messages for Adobe Illustrator CS3, and Adobe Dreamweaver CS3 will not open at all and does not even display an error message.
View 1 Replies
ADVERTISEMENT
Dec 8, 2012
I just reinstalled Photoshop CS5 Extended onto my new computer. I had it running before but I got a new hard drive. I am still running Windows 7 32 Bit. Seemed to install. When I opened up Photoshop and tried to open a new document or open and existing photo I got this message: "Adobe Photoshop CS5 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
View 6 Replies
View Related
Jul 17, 2013
Installed CC photoshop on a brand new W530 laptop. Upon launching either the normal or 64 bit versions of photoshop CC, the application loads then I receive the following error...
"Adobe Photoshop CC has stopped working"
I am unable to use the application, I have removed and reinstalled also in an attempt to correct the issue. investigation of the event log results in the error below.
Log Name: Application
Source: Application Error
Date: 7/17/2013 9:24:12 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: TAG004144.tagusa.com
[code]....
View 5 Replies
View Related
May 6, 2013
I downloaded and installed cs6 for windows 7 32 bit and cant open it to use,i get the message" adobe photoshop cs6 has stopped working" I have tried different graphics drivers but still the same. My other adobe softaware works fine,IE: elements11 and lightroom4.
View 5 Replies
View Related
Mar 13, 2013
On my new Dell XPS 8500 Win 8 computer Photoshop CS6 keeps stopping working. I've tried both 64-bit and 32-bit versions and updated the video driver after phoning Dell. Also installed latest Adobe program updates. I keep getting the error message "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
View 14 Replies
View Related
Dec 14, 2012
I've instslled CS4 but keep giving me error message ' licensing for this product has stopped working' Error 150:30
View 2 Replies
View Related
May 13, 2013
Upon opening my Adobe Photoshop 11 the programs error says "Editor has stopped working" closing the program. I really need my editor
View 4 Replies
View Related
Jun 26, 2013
I recently upgraded from Photoshop Elements 10 to 11. Everything works great while I am using it but if I do not do anthing in Elements for 4-5 minutes I get the 'Elements 11 Organizer has stopped working' error message, the only option I have is to push the 'Close Program' button.
View 4 Replies
View Related
Nov 29, 2011
repeat error each and every time I use any adjustment on graphics, photos or anything I am working on with PSP X3. Am including a screen shot, edited down to the forum specifics, and I had to edit the screen capture with PSP X2 since to reload PSP X3 will now require my restarting my computer.
I have used Paint Shop Pro since it's very first incarnation as a tiny program courtesy of the folks with Jasc, so this is not my first time using the product, just the absolute worst experience doing so.
No matter what the image, file type, or set-up, when I try to make adjustments (even if I make sure to stop and make double sure they are finished processing), eventually the program locks up and I get the error shown and stated.
View 3 Replies
View Related
Jan 1, 2012
This is about the "MetadataMgr has stopped working" endlessly repeated error.VideoStudio Pro X3 under Windows 7 (64-bit) has recently become unstable, and I get the "MetadataMgr has stopped working" endlessly repeating error. Corel's MetadataMgr.exe doesn't stop creating errors unless the PC is rebooted.
I uninstalled VideoStudio Pro X3 and then reinstalled it. The problem disappeared briefly, but came back next time I attempted to burn a DVD using VideoStudio Pro X3. So again I'm in MetadataMgr hell, with a video editing program that bombs. All patches on the Corel WWW site have been installed, with no affect on the problem.
I see that this has been discussed here before (Thread: Possible to use DVD Factory Pro 2010 w/o metadatamgr.exe?), and there is supposed to be a fix by deleting some directories somewhere.
View 1 Replies
View Related
Oct 23, 2012
I'm a photography student at the Art Institute's online division. I've been working with LR 3 for the past couple of weeks. Suddenly the program shut down; I got an error message from Windows, saying it would keep looking for a solution, but then I couldn't even open Lightroom at all. I was having the same problem with PhotoShop from the Creative Design Suite 5.5.
I uninstalled both programs, then re-installed. Now PhotoShop's fine, but Lightroom is still doing (or rather NOT doing) what it was before, with the same error message.
Oh--one more thing. I recently bought a Nikon D5100, so I uploaded the two software disks when I was ready to transfer photos directly from the camera to my laptop. I don't THINK this is the problem, since I didn't start using Lightroom until after I uploaded the Nikon software, and both worked fine last week. However, just in case, I uninstalled the Nikon software & haven't yet re-installed that.
View 2 Replies
View Related
Oct 27, 2010
how to get the dvd factory pro 2010 running on a windows 7 pc? I just installed videostudio x3 on my pc and I cannot burn a dvd.
View 1 Replies
View Related
Apr 30, 2013
Reference Manager crashing when starting.
Error message states: AutoCAD component has stopped working.
View 2 Replies
View Related
Jan 1, 2013
Lightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?
View 2 Replies
View Related
Sep 2, 2008
I'm getting this message:
"Adobe Photoshop has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I have uninstalled/reinstalled Photoshop and still get the same message.
DELL XPS 420
Windows Vista Home Premium.
3GB RAM
Adobe CS3 Design Premium
View 6 Replies
View Related
Feb 28, 2013
And before you say "It's because it's 14 years old", know that it was working perfectly until about two months ago.
I have a Windows 7 laptop with 4GB memory, plenty of HD space, and no other PC issues.
View 9 Replies
View Related
Dec 15, 2012
My Photoshop CS4 and CS5 shows "Photoshop has stopped working" . Whereas I have Windows 7 64bit, 6GB RAM, 512MB Graphics Card.
Earlier I worked in this version. But after formating my conputer I could not do anything with only in Photoshop. First I installed Photoshop CS4 it was failed to work then install Photoshop CS5..It also failed to work.
View 2 Replies
View Related
Oct 3, 2013
I updated Photoshop CC about 7 days ago. Before that it worked fine, since then I have been using Photoshop CS6 for some work (CC left it there when it installed) but yesterday I wanted to go to Photoshop CC from Lightroom 5.2 and Photoshop CC hung. Rebooted computer and tried to open Photoshop CC but it crashes on initialization.
As interim measure I installed PS CS6 as an optional external editor in Lightroom, but I would like to use Photoshop CC again one day!
View 6 Replies
View Related
Jun 28, 2013
Yesterday, I tried to start up Photoshop, but it got halfway through initializing and stopped, flashing a message: "Adobe Photoshop CS5.1 has stopped working." I shut down the computer and tried again, but it repeated three or four times.
So I uninstalled the program. Upon reinstallation, installation failed and the computer said: "Your installation encountered errors. Please try restarting your system and installing again. Exit Code: 20."
View 4 Replies
View Related
Sep 30, 2013
I have been using my program since June without issue. Suddenly it stopped working. I can open the program but it will not create a new file or open an existing file. If I "open with" from windows explorer it won't open either. I have uninstalled and reinstalled the program and I'm still not having any luck.
View 1 Replies
View Related
Feb 23, 2009
I get an error message from windows vista premiumm home.
It just says: Adobe Photoshop CS3 has stopped working correctly. Windows will close the program and notify you if a solution is available. The only option is a box that says "close program". Once you close it everything goes away. It doesn't even give you a hint of what the problem could be. I installed creative suite 3 web premium on this brand new computer about 2 weeks ago. This is a first time install of this software, but when I called Adobe they said they don't offer free installation help anymore on cs3 because cs4 is out now. Anyone have a clue what I should do? I can't just uninstall photoshop, if I try it wants to uninstall all 8 programs.
View 1 Replies
View Related
Nov 20, 2012
I am working on a floor plan in CS5 Photoshop. Just basically tracing over an original document and erasing what I trace over. I do this all the time and it has been working fine.
But now the eraser won't work at all. When i turn off all the layers except the background layer I can erase things, but then when I turn the layers back on, it doesn't show up erased. I've tried resetting the tool and that didn't work. I'm so confused as to why it just stopped working.
View 16 Replies
View Related
Dec 11, 2012
i'm getting the error shown in subject. view details indicates problem with cooltype.dll. error started immediately after i activated a font in suitcase fusion 3. i was able to run photoshop 32bit to finish job. i deactivated font in suitcase and restarted computer. suitcase is not running but i still cannot run photoshop. what can i do to fix??
View 3 Replies
View Related
Mar 10, 2013
My CS5 was working fine yesterday. Today, it abruptly stopped (error message states photoshop stopped working and must shut down.) I reopened both times and same thing happened.
View 4 Replies
View Related
Nov 14, 2012
Downloaded PS CS6 from Application Manager. Download and install seemed to go fine, but I can't start the program. Have downloaded and re-installed numerous times, and removed the previous installation before that.
My OS is Windows 7. I have had Adobe software installed, but removed (tried at least) everything when trying to get this work. Photoshop CS5 worked fine on this same setup. I get Windows error message when trying to start the program, and with problem details like this:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 13.0.0.0
Application Timestamp: 4f61beba
Fault Module Name: Photoshop.exe
Fault Module Version: 13.0.0.0
Fault Module Timestamp: 4f61beba
[code]....
I got 57,1 GB free space on drive C, where I've installed the program.
View 13 Replies
View Related
Aug 1, 2013
3D functionality has stopped working in Photoshop CC?
View 5 Replies
View Related
Oct 29, 2012
Had to replace the hard drive on my iMac. I use Time Capsule and when the new hard drive was installed had Time Capsule bring all my applications and files back. It seems to be working with all other files and apps.
But when I tried to use Photoshop CS 4 I received error message suggesting I restart the MAC which I did. Then got the same error message when I tried to open Photoshop. It said if restarting doesn't work go to Adobe.
View 1 Replies
View Related
May 16, 2012
I suspect the installation of Canon Pixma Printer software may have trashed Adobe components, is there an easy way to repair/reinstall just that part? I have the CS6 Master Collection and don't want to reinstall the whole shebang.
View 8 Replies
View Related
Jan 3, 2012
I am trying to run Photoshop CS5 on Windows 7 64bit. Everytime I open the program, I get an error saying "Adobe Photoshop CS5 has stopped working", immediately after the splash screen goes away and the main gui opens. The only option on the error is "Close Program".
I am on a computer with an i7 processor and 12GB of memory. I have two Nvidia GTS 250 video cards, running four monitors.
Over the course of the last day, I have reformatted my computer, and reinstalled Windows twice. I have reinstalled the CS5 Master Suite more times than I can remember. I have also downloaded and installed the latest video card drivers from Nvidia.
I continue to have the same problem every time I try to open any of the programs in the CS5 suite.The only time I have come close to getting it to work was immediately after installing the new Nvidia drivers, before restarting my computer. I was able to open it one time without it crashing, Once I restarted my computer, Photoshop continued to give me the same error every time I try to open it.
I have no other software installed on my computer. It is a brand new installation of Windows 7.I have been on the phone with Adobe technical suuport for about an hour and a half, and I have yet to get a single suggestion other than attempting an install with my network cable unplugged. Other than that, they seem to be fond of transfering me back and forth between departments (and asking me to repeat all of my information every time).
View 72 Replies
View Related
May 24, 2013
One day I could print but the next I get "Adobe CS6 has stopped working, Windows is looking for a solution". I have tried re-installing, up-dating drivers, clearin preferences etc but without success!
View 6 Replies
View Related
Mar 21, 2013
I was using my photoshop cs6 extended for about two months and it was working good,no problems.Then i stopped using it for about 3 months and today when i decided to use it again-it's stopped working.When i press on Photoshop.exe-nothing happens.Nothing at all,no errors,just nothing and photoshop won't open.All other .exe programs works good.
View 1 Replies
View Related
