I recently upgraded from Photoshop Elements 10 to 11. Everything works great while I am using it but if I do not do anthing in Elements for 4-5 minutes I get the 'Elements 11 Organizer has stopped working' error message, the only option I have is to push the 'Close Program' button.
View 4 Replies
I'm a photography student at the Art Institute's online division. I've been working with LR 3 for the past couple of weeks. Suddenly the program shut down; I got an error message from Windows, saying it would keep looking for a solution, but then I couldn't even open Lightroom at all. I was having the same problem with PhotoShop from the Creative Design Suite 5.5.
I uninstalled both programs, then re-installed. Now PhotoShop's fine, but Lightroom is still doing (or rather NOT doing) what it was before, with the same error message.
Oh--one more thing. I recently bought a Nikon D5100, so I uploaded the two software disks when I was ready to transfer photos directly from the camera to my laptop. I don't THINK this is the problem, since I didn't start using Lightroom until after I uploaded the Nikon software, and both worked fine last week. However, just in case, I uninstalled the Nikon software & haven't yet re-installed that.
Reference Manager crashing when starting.
Error message states: AutoCAD component has stopped working.
I am running Windows Vista. I have just installed Elements 10. Everytime I start the programme It goes into organiser and ten seconds or so later I get a message saying " Elements 10 Organizer has stopped working" A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
View 2 Replies View RelatedI have Elements 12 and it has started crashing - with the "Elements 12 Organizer has stopped working"
Im running the Windows 8 (64bit) o/s
Photoshop elements 11 running windows 7, have been using Photoshop elements 11 for approximately a year, this morning can't get it to launch, get the message program has stopped working with the APPCRASH problem message. Tried resetting to default preferences and shutting offf the firewall, still the same.
View 1 Replies View RelatedI have had Elements 8 working for quit a while on a HP windows 7 64 Bit machine (years) and now suddenly the Organizer crash's when I try to start it. The editor starts and works OK. The problem seemed to start when I switched on the option to autoanalyze on startup , but cannot verify as the setting panel is in the organizer menus!
View 2 Replies View RelatedI have PSE 8, PS Premier 8 and LR 4 insta;lled and haven't had any problems with them. Yesterday I tried to open PSE 8 and received a 'Bad Image' message that stated
"C:Program Files (x86)AdobeElements Organizer 8.0amtlib.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.'
However, I went to My Pictures, selected a file that I had edited in PSE 8 a few weks ago, right clicked on Open With PSE 8 Editor and there it was. When I right clicked on Open With PSE 8 Organizer, I got the same error message as shown above. I also tried openiong Organmizer through Editor ald also got the same error shown above.
How do I resolve this? I'm running WIN 7 Pro, DELL XPS 8300.
My ability to share photos using attach to e-mail has stopped working. I get an error message: Organizer could not finish creating e-mail message. Make sure Microsoft is selected as the default program in Windows INternet Control panel. Additionally, I'm upable to check for updates. I get an error message something like "the server is not available..."
View 2 Replies View RelatedGetting error message 1305 installing organizer part of Elements 12 on DVD? Could this be due to a upgrade version on new computer
View 1 Replies View RelatedUpon opening my Adobe Photoshop 11 the programs error says "Editor has stopped working" closing the program. I really need my editor
View 4 Replies View RelatedA couple of days ago my photoshop will constantly crash with the "appcrash"/stopped working message, usually while i'm minding my own business painting however this problem has rendered photoshop virtually unusable.
the report is as follows:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 13.0.0.0
Application Timestamp: 4f61c045
Fault Module Name: Photoshop.exe
[code]....
I'm running win 7, 8gb ram, i5 3750k and a gtx 560ti..i've tried reinstalling several times, deleting preferences, updating graphic drivers to no avail.
I have been Recieving a message 'Photoshop CS5 has been stoped Working' after opening PS and can do a little editing and after about 4 minutes the message comes which have only one option , close program. Sometime i recieve another message also 'Onone Library' which have option 'ok'. (Adobe Photoshop CS5.1)
I tried for a solution by changing name of file in C:Program FilesAdobeAdobe Photoshop CS5.1Plug-insExtensions changed Scriptingsupport into ~ScriptingSupport but not solved. Some cannot open image.A similiar has inserred , only change in the name {Skype ------- Photoshop}
I installed Corel Video Studio Pro X4 Ultimate on my laptop at the end of last year and up until now it has been working fine. Because I was not happy with the final dvd of hd footage (I don't have a blu ray burner) despite trying all the settings I purchased Pinnacle Studio 15 ultimate because that seems to give a better result when burned to disc. At first Pinnacle was not working in that all of its elements were not accessible so I was editing my footage in Corel and then burning the end result in Pinnacle. Having gone on to the Pinnacle Forums I was advised to change from the default computer desktop theme of Aero to Windows Classic and change the display to smaller - 100%. This solved all the problems with Pinnacle and it is now working properly. However, when I tried to open Corel it came up with the message Corel Video Studio Pro has stopped working, close the programme. I have uninstalled it and reinstalled it and it still refuses to open up. Until changing the desktop theme Pinnacle and Corel did not appear to conflict with each other so I had no reason to think there would be a problem running the two applications.
I have taken a screenshot of the error message but cant seem to paste it to the post.
I now am running a Core i7 -2760 QM CPU @ 2.40 GHZ laptop
16gb RAM
Windows 7 Home Premium
64 bit
I just reinstalled Photoshop CS5 Extended onto my new computer. I had it running before but I got a new hard drive. I am still running Windows 7 32 Bit. Seemed to install. When I opened up Photoshop and tried to open a new document or open and existing photo I got this message: "Adobe Photoshop CS5 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
View 6 Replies View RelatedI have been using Adobe Photoshop CS3 for a couple of years and for the most part haven't had any problems. However, when I tried to run the program today, the message "Adobe Photoshop CS3 has stopped working. Windows can check online for a solution to the problem." popped up, and I could not run Photoshop.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 10.0.0.0
Application Timestamp: 4601eae8
Fault Module Name: MSVCR80.dll
Fault Module Version: 8.0.50727.6195
Fault Module Timestamp: 4dcddbf3
(It also listed information for the Exception Code, Exception Offset, OS Version, Locale ID, and four different kinds of Additional Information, which I have not listed here).
I also suspect that I'm having the same problem with all of my other Adobe software (I have Adobe Creative Suite 3 Web Premium), since I am getting similar error messages for Adobe Illustrator CS3, and Adobe Dreamweaver CS3 will not open at all and does not even display an error message.
My pse10 organizer just stopped opening. crashed.Have been working with organizer for years.
View 3 Replies View RelatedInstalled CC photoshop on a brand new W530 laptop. Upon launching either the normal or 64 bit versions of photoshop CC, the application loads then I receive the following error...
"Adobe Photoshop CC has stopped working"
I am unable to use the application, I have removed and reinstalled also in an attempt to correct the issue. investigation of the event log results in the error below.
Log Name: Application
Source: Application Error
Date: 7/17/2013 9:24:12 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: TAG004144.tagusa.com
[code]....
I downloaded and installed cs6 for windows 7 32 bit and cant open it to use,i get the message" adobe photoshop cs6 has stopped working" I have tried different graphics drivers but still the same. My other adobe softaware works fine,IE: elements11 and lightroom4.
View 5 Replies View RelatedOn my new Dell XPS 8500 Win 8 computer Photoshop CS6 keeps stopping working. I've tried both 64-bit and 32-bit versions and updated the video driver after phoning Dell. Also installed latest Adobe program updates. I keep getting the error message "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
View 14 Replies View RelatedI've instslled CS4 but keep giving me error message ' licensing for this product has stopped working' Error 150:30
View 2 Replies View RelatedI'm trying to build my first catalog and keep getting an Import Failed on certain files. These are .jpg images and can be opend outsid eof PSE 12 just fine. I've looked at the image properties and they look fine (just as fine as images that are able to be imported). Is there anything that can be done? I'm trying to move off of Picasa and these images have been imported just fine into Picasa.
View 1 Replies View Relatedrepeat error each and every time I use any adjustment on graphics, photos or anything I am working on with PSP X3. Am including a screen shot, edited down to the forum specifics, and I had to edit the screen capture with PSP X2 since to reload PSP X3 will now require my restarting my computer.
I have used Paint Shop Pro since it's very first incarnation as a tiny program courtesy of the folks with Jasc, so this is not my first time using the product, just the absolute worst experience doing so.
No matter what the image, file type, or set-up, when I try to make adjustments (even if I make sure to stop and make double sure they are finished processing), eventually the program locks up and I get the error shown and stated.
This is about the "MetadataMgr has stopped working" endlessly repeated error.VideoStudio Pro X3 under Windows 7 (64-bit) has recently become unstable, and I get the "MetadataMgr has stopped working" endlessly repeating error. Corel's MetadataMgr.exe doesn't stop creating errors unless the PC is rebooted.
I uninstalled VideoStudio Pro X3 and then reinstalled it. The problem disappeared briefly, but came back next time I attempted to burn a DVD using VideoStudio Pro X3. So again I'm in MetadataMgr hell, with a video editing program that bombs. All patches on the Corel WWW site have been installed, with no affect on the problem.
I see that this has been discussed here before (Thread: Possible to use DVD Factory Pro 2010 w/o metadatamgr.exe?), and there is supposed to be a fix by deleting some directories somewhere.
how to get the dvd factory pro 2010 running on a windows 7 pc? I just installed videostudio x3 on my pc and I cannot burn a dvd.
View 1 Replies View RelatedIn Elements 9 I now get an error message "Cannot use Clone Stamp due to program error".
View 1 Replies View RelatedEvery time I click on a photo in Organizer I get a missing file message....how can I avoid this?
View 2 Replies View RelatedAfter install the Orgainzer works but the Photo Editor doesn't. When I click the Photo Editor in the splash screen it tells me my trial period is up. I'm using Windows Vista Home Basic 32 bit
View 5 Replies View RelatedWhen going to "Output" to make a DVD slideshow, the WMF is at 7% Windows says that Photoshop Elements 10 has stopped working.
View 1 Replies View RelatedWhen i open Adobe Photoshop Elements 6, which i have used for quite some time and its always worked, it now had a blank window pop up and it will no longer let me create new documents, open old ones or use any features. Basically it just freezes and doesn't even let me quit the program, i have to force quit it every time.
View 1 Replies View RelatedWhen I open photoshop elements and click on the editor a message box appears that states PSE 12 Editor has stopped working.
View 1 Replies View Related
