how can i draw a donut shape easily and beautifully? if use the subtratct selection tool, the outer and inner circle are harder to be put on the right place. is there a way to move one selection(inside or outside) without moving the other one? what about hatching it with dashed line pattern?
View 1 Repliesis it possible to create a donut shape with 1 shape layer (multiple groups)? I can't figure out how to subtract out the hole. I see that there's some blend modes, but no stencil alpha.
Must I use 2 shape layers and track matte, or multiple solids/masks?
I have an image which can be considered to be a donut on a transparent background. Using the pen tool, I drew a complete path around the donut, made it into a selection with feathered edges, and successfully copied the feathered donut to a new transparent background. The problem is that, while the outer edges of the donut are feathered and nice-looking, the inner edges of the donut hole are still unfeathered and sharp. recommend an easy way to feather the inside edges of this donut hole?
be aware that this "donut hole" is actually the inside of a dog's ear, so use of the elliptical marquee is not an option.
I'm wanting to know the best way to draw a tube going through a donut, as in the attached example. I'm guessing it's pretty simple, but I've tried clipping masks, pathfinder etc and can't quite get my head around it. I could just draw it with the pen, but I'm guessing there's a quicker way.
View 2 Replies View RelatedHow do I create a torus (donut) in PSP X4? Preferably with a gradient so that it looks like a piece of pipe that is wrapped around?
View 10 Replies View RelatedI have a drawing of Clock Face here (see the picture below), which requires donut for the outer circle. My first question is, looking at the picture, what would be the limits, grid, and snap settings? I made an attempt with the limits (0',0') (12',9'), with Grid =0'-0 1/2", and Snap = 0'-0 1/4", but it didn't work out well. I tried to make the Snap 0'-0 1/32" but it couldn't, neither 0'-0 1/16", nor 0'-0 1/8". Why can't I set the Snap to 0'-0 1/32"?
Next, I would like to know how the outer circle could be constructed with donut. The small inner circle below it is of 1'-11" + 1" + 1" in diameter, that is, 2'-1". If then the Donut (as shown) is to be of 24" inside x 1" thick, the 2'-1" DIA circle would disappear within the thickness of the Donut, leaving no gap between them both. How could this be drawn,
In Photoshop CS6, when you have a shape layer with a layer mask, and the two are not linked together, and the layer mask is selected, you should be able to scale the layer mask independently of the shape. What actually happens is the shape gets scaled and the layer mask stays untouched. In fact, even if you option-click on the layer mask to show the mask by itself, and then try to scale it, you still end up scaling the shape instead of the mask. Even if you go as far as to make a pixel selection of the layer mask and attempt to scale the pixels, the shape still gets scaled and the layer mask still stays put! Unbelievable!
This works correctly in CS4, but not in CS6 (don't know about CS5).
I want to make a vector shape from a path. Is there a way to bypass having to define a new custom shape? I just want to quickly add the vector shape to a new layer, but I don't need it defined as it'll just be used once.
View 5 Replies View RelatedShape making from multiple complex shape and path layers?
so i have few layers(all vector paths and shapes) .
now how to make a shape from all of that. every new shape is layer for itself. I need it for logo.
any way to delete more than a single shape at a time from a shape collection file, other like step by step with the option key? I have one collection with about 400 shapes and would like to save it to some "groups", like people, arrows, devices..
View 1 Replies View RelatedSince the release of Photoshop CC the "Live Shape Properties" has basically chosen when it does and does not want to show up.... sometimes I even create a new shape to replace the old one and it STILL does not show the live shape properties... how hard is it to make sure the options are available at all times? I opt for a discount since this is a half working application and the features you highlighted barely function...
View 1 Replies View RelatedIs it possible to fill a shape with a gradient fill so it goes up to all edges and gradually get darker/lighter inwards? For example, If I have a star shape, can I have a gradient fill in the shape of a 'star'?
View 1 Replies View RelatedI'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
I'm working with CorelDraw X3 and want to fill text into a round shape, while keeping it's exact outline. Hence, cutting of parts of words and letters is fine with me as long as the shape is well-defined. Unfortunately when filling paragraph text into a shape, the automatic line breaks lead to a quite irregular shape regardless of font size.
As workaround I arranged a mask in front of background and text but this requires a square paragraph text which is larger than the background. Since paragraph text obviously cannot be cropped with other objects I made the mask size bigger and filled it white. When exporting my document as image everything looks neat, but there must be a better way to do this in CorelDraw itself?
I tried converting the paragraph text into artistic text and cropping this, which works fine for a few words and a small object. But I'm talking around 1000 words here, and trying to crop this artistic text leads to very random cropping results. I guess such a large number of objects and knots is too much for CorelDraw to handle!?
I want to engrave the text 'TEST' all the way around this clonal object. When I use the emboss tool, selecting the option 'wrap to face,' it gives me an error message that the "face selected is not tangent to the profile plane."
I am using a work plane that is offset from the XY plane. I included a screen shot and the file that I am using (Inv. 2014)
I just read the thread the thread "...plus ask about erasers" but it doesn't answer my question about combining shapes to remove unwanted portions - or at least I didn't quite understand it. Here's my issue. I've created a nice "background" image with ripples and live effects, but it has gaps, and isn'tthe right shape. I need to erase parts of it and clip it to the right shape, but every time I try to do this using the slice tool, it puts the gaps back into the image! Attached is my image and the shape I want to clip it to.
I just tried converting the ripple shape to a bitmap copy and then slicing the shape - that doesn't get me the rippled effect I want - just the shape I already have. Then, I tried just creating the water ripples in my shape - but again that leaves gaps and when I try to "slice" them away it does all kinds of weird things to the shape..
I'm using CS3 on a Mac.
I outlined my text and subtracted it (and the tree image) from the black background. When I did this both appear thinner - particularly the tree.
If I then take the original version and the new subtracted version, and view them both overlayed one on top of the other in wire frame (outline) mode, there is no difference in the actual lines.
It seems to be a problem with the way illustrator previews the images. This wouldn't concern me, but when I export the file as a jpeg, the lines also appear thinner in the export.
I can create a manual solution by offsetting the path before subtracting, but this isn't ideal.
What does it mean when Illustrator v.15.1.0 ceases to contract a shape using offset paths and will only expand a shape? Seems like only yesterday I could render both ways. Wait a minute, it was only yesterday! Why would it suddenly stop funtioning?
View 3 Replies View RelatedI have two layers on the bottom I have text, and on the top I have a shape.
How do I make the shape transparent so the shape may be filled with the background color?
I just installed CD on my daughter's computer and her shape tool only allows for a free form selection by following the cursor in a free form way. My install allows for a rectangular click-and-drag type of selection. I see no options for this tool Is her install bad?
View 5 Replies View Relatedi am trying to draw an aircraft and after drawing the windows, i got stuck. i am trying to revolve a shape around the shape of the window (oval) but it won't recognise that shape as an axis. i can't click it. is there a solution to this?
here is a screenshot for extra info!
Here when ever i click on the editable poly modifier again this happens, now im pretty sure this is not supposed to happen,
i tried searching the internet and several forums but no results (maybe im just missing some 3dsmax vocabulary so i didnt coin the term for it)
How do i use a specific shape to carve out a primary shape
e.g. putting a sphere inside a box (sphere is protruding from all 6 faces) and carving out the box
Edit: changed the image to a link and added the scene file as an attachmentbutcher_knife.zip
I am trying to distort/shape a photo to fit into another shape, in the shape of a shield. Its something that would be reused on otehr pictures.
2 things i would like to do, first is of course as above
the otehr, is there any way to creat like a rubber stamp or a cutting tool, that once I have the shape I want created, I can use that to copy/cut/paste that image shape from otehr images also ?
I'm trying to repurpose some artwork and am running into an issue. In the image below, I simply want to delete the bottom right corner of the blue box so that the orange background is visible along the right edge of the curved shape and the blue box is visible along the left edge of the curved shape. But I cannot figure out how to do this. I've tried all the Pathfinder choices and none work. How can I do this? CS6, Windows 7.
View 12 Replies View RelatedI'm trying to cover a section of letters that have been outlines with a red box over a serif for a homework project. HOWEVER. Everytime I do this, it looks like I have it all lined up and when I make another point, the points move on its own to be off and not cover the object Say I complete the box and try to cover the object by just dragging and dropping, it will avoid that area and move it off to one side or the other but never align with the actual object I'm trying to cover for a smooth and even coverage. Trying to get the red box to cover the black serif and it won't do it.
View 6 Replies View RelatedIn PS i can Magic wand selection shape from one layer, drop to sub layer and copy that selected shape from that sub layer. How do I do this in illistrator, and moreover, from multiple layer at the same time.
For instance, in PS = Import an image of gold - select a text phrse with wand - drop to gold - copy paste = gold text.
This is something that has bugged me for ages. Sometimes i have real problems making a circular hole in another shape. I would normally use 'back minus front', but when i do this a lot of the time Corel adds the nodes into the shape but it doesn't actually cut out the area. Hopefully the graphics here will explain this better.
So i want to cut the three white circles from the blue background, but you can see the results:
The odd thing is this doesn't always happen. If i just draw a square and a circle, and cut one from the other, it works fine. Also, is there an easy way to 'punch' out the nodes that it has left in there to make the hole in the shape?
Is it possible to creat a selection with scissors for example and then drag that shape somewhere else to cut it there.
I need to cut a piece of wall in a difficult shape inbetween things. so thats why i want top creat that difficult shape and then cut it from the wall.
Or am I getting it totally wrong and should i try another method?
I'm new to Adobe Illustrator (CS5) and, as the topic says, have an very basic question: how to hide a shape behind another shape? (say a star shape behind a rectangle)
I've looked up on tutorials and such and from what I've seen, the layers order containing each of the objects decides how the occlusion should occur, however I've tried doing that but with no luck, am I missing something here?
I am using Illustrator CS3 on a Mac 10.5.8.
I am trying to create a compound shape from a compound shape I have prepared.
The first part works okay. I can combine the hexagon-compound-shape I have created from multiple hexagon shapes.
I then want to cut away the edges on a part of the compound shape (using a box of 4 rectangles), which is supposed to give me a rectangle with only the lines from the compund-shape inside this rectangle (image 1).
But when I cut away the box around my hexagon-compound-shape (using the Pathfinder window), the hexagon-compound shape inside behaves strangely, with only some of the lines showing and other lines missing (image 2).
I would like the rectangles to simply just cut away the lines that the rectangles are covering, and leave behind the lines in my hexagon-compound-shape, as they appeared in image 1, and not having hexagon-compound-shape changing which lines appear and disappear.
How do I mowe a shape on shape layer A to shape layer B?
View 1 Replies View Related