i purchased a template for my website, my template came in PSD Format - now when i load it into photoshop i can edit the test i want to change fairly eazily when i use the T (typing tool) and click on the text i want to edit.
Now, some part when i click on the text i would like to edit allows me to put text in and select colors, fonts and so forth but it does not let me overide the existing text. So i take it this part is not formated correctly or the same as the rest of the template is.
Now i figure i can edit what i want my template to look like in that area i want to change the data but then the old text will remain so i would have to someone earse the old text or something first...
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
I have inside every text,Mtext contents different text style like Arial_1 , Arial_2.
How i can give all the contents inside one style ? the normal procedure i will enter inside text to enter editing mode and changing text format style one by one. I want it once.
I want to save my routing of entering every text to change its content text style.
(Notice:select all from outside without editing mode will not do the job)
I am having problems with changing the height of the dimension text. I have tried going into the style editor and changing the text height in there and then saving it. The number for the height that I changed stays saved however the actual text height on the drawing does not, not even after I tell it to update.
I am having trouble in changing the color of the bullets without changing the text color. Problem is I cannot select/highlight just the bullet so any new color selected applies to the whole line including bullet and text. I am using DP v 7.
I am a web designer and regularly get sent logos etc from clients. More recently I have been sent a jpg image black and white of a girl with a wedding veil on. There is some handwriting text to the left which is a white colour.
As I dont have access to the original psd file I am trying to find an easy way to change the text colour to a pink the client has chosen.
I am using adobe photoshop cs6 and have tried using the colour swap option under image tab but it just seems to change the colour to gray and not the pink i have selected.
Very difficult to change a font in Photoshop CS6: I select the font then go to the dropdown (either the side panel or the options panel at top; same results) and BEGIN TO scroll down to find the font I want to change to. After a couple seconds, the list pops back up to the top. Usually I cannot scroll past the fonts beginning with M or N before it overrides my scrolling and pops back to the top again, If I can select quickly, I can sometimes nab a different font that starts with a B or C, but hardly ever one I am seeking.
I'm trying 3d text for the 1st time in Photoshop Cs6 Extended. The problem is every time I create new text and and change the colour it's always showing up as black. Nothing I do seems to alter this.
I write a line of text. I would now like to select the text field to change the color of the text rather than highlighting the actual text itself. This is because highlighting the text changes the bg color to black over the text you highlight and alters the color of the text (I think it inverts it). Is this possible?
I have a .PSD file that someone made for me before I had Photoshop that I want to edit. I'd like to change the actual text of the image, but can't figure out how to do it. I can change everything about the text layers, except the text It's probably something very easy, but I'm a complete Photoshop newbie. Could it be that I don't have that font installed, or something like that?
I wanted to change the text of the image. While changing the image i want that the background should remain the same and i could change only the text is this possible through Photoshop i am using photoshop 7.
I need to remove the text saying "A Innland", but the background isn't quite the same at all points - the further right you go, the lighter it becomes. How would I go on about removing this? The text is ingrained in the picture, it's originally not a Photoshop file with a text layer on top. I am using Photoshop CS6.
when writing in a text box whenever using punctuation it always go to the beginning of the sentence. FOR EXAMPLE (?what time is it)i have tried changing the text engine option to East Asian and then restarting photoshop, but when reopening my exisitng work, the problem still remains.However when creating a new document the problem is gone, however i want to resolve the problem with my exisitng document i have been working on.
So I am attempting to use a black theme on my windows pc. My Creative Suite 2 products use black text in the menus and pop-up dialogues (such as canvas size). Of course, I can no longer read the options. Is there a way to get Adobe products to use the menu fonts defined by windows, or at least to change it within the software?
I need to change the width and height of some text i'm inputting to and image so that the height is 100% and the width is 75% in ariel size 11, how do i do it? I cannot find the answer on google,
also, the phrase capitalized, is this some special setting or does it just mean write in capitals
I am encountering an issue with my copy of Adobe CS6 Photoshop Extended which results in a random increase in the size of text when I try to adjust the size value.
whenever I drag-click the cursor to change the text size value, the input option randomly increases by an also random number of millimeters, suddenly blowing up the size of the text. It then allows me to drag-resize from that increased value. However, when I get to the value I want and release the drag-click it randomly increases the values again thus increasing the size much beyond what I had specified (again increasing the size!!). URL.....
I am running Adobe Photoshop CS6 Extended (ver. 13.0.5 x64) on an Early 2011 Macbook Pro i7 2.0GHz with 16GBs of RAM. The issue happens on both the built-in trackpad and my Wacom Tablet.
I have a set of images of complex text that has already been rasterized into pixels. My client would like the images transformed with a different background color and different foreground (text) color.
Just replacing the 2 colors of course does not preserve the antialiasing which provides the smoothness. And when I try hand-editing the aliased pixels it takes forever and always looks pretty bad.
Ideally there would be a way to transform the color schema globally so that the 2 foreground and background colors are changed as directed, and all "intermediate" antialias pixels adjust "accordingly". Does such a transformation exist -- can you specify a color transformation that adjusts 2 colors at once?
Or is there a more painstaking process of masks and such? I've tried several versions with masks, selects, feathering etc. but haven't found anything yet that gives professional antialias quality to the final recolored result.
I'm using PS CS6 13.0.5 x64 on Snow Leopard (iMac 27" late 2012). I tried to change the text engine to Middle Eastern, but after I restart PS, the program is nearly non-responsive, and it takes forever to edit text. Changing it back to East Asian solves the problem, but then again, I want to use the Middle Eastern feature...
When I use Illustrator CS6 I don't have such problems (although I have to write backwards, since there is no support for right-to-left in Illustrator in my version)
I have a type layer with some text in it (a headline, let's say). I click on the layer, I click on the Character Panel, and first thing I see is the color in the Panel is not the color of the font in the layer.
I then click on any Panel property, and the text in this layer is replaced by text from another layer in my document ( a paragraph layer, let's say), but the color is not the same as the layer the text came from.
I often will borrow groups and layers from one document and drag them into a new or a different PS document to borrow the layers and formatting so I am not starting over from scratch with a design that I just need to re-work into a different size.
But in the last two weeks, when I drag the layers over, they start mysteriously changing into other layers that I did not drag over. What is causing this bug? It wasn't there before as I have performed this action many times in various projects. I am using PS CS6 on a Mac Book Pro.
I used to have a lisp routine for selecting multiple strings of single line text and converting them to a single multiline text box. I think there was even an express tool in previous versions of CAD to do this. I am in 2011 now, and I can not find a command for this. I would even settle for simply changing single line to multiline without adding multiple strings.
Any easy way to change text color, making each letter of a word or words a different color.My text changes, but I need the same color combination available.
I can no longer type in the size of an object. I draw a rectangle and then type in the correct size. Nothing happens. The size of the box does not change.
It's the same with text. If I type a name that needs to fit a certain area, I type in the size for the width and it doesn't change.
This has happened in a couple of drawings now. The STYLE dialog keeps saying "The current style has been modified. Do you want to save your changes?" even when I have changed nothing at all. Anyway, I select the style I want, hit Apply and Set Current, and put in some text. Now I list that text, and sure enough, instead of being on L80 it says L-BASE|Standard or some such thing. If I use DTEXT, Style and set it there, my text will be the correct style - but if I go back to the Style dialog box, L-BASE|Standard will show as current again. Acad C3D 2011.
I'm trying to automate something that takes a lot of time at my company.We got a lot of P&ID drawings full of tags. I want to automate the modification of tags according to an excel table.
I got something working but it's not reliable. It often doesn't work and it's very slow. I'm no programmer besides some programming classes back in school.It's function is to let the user pick which P&ID's should be put in the modification loop.It's just a listbox (filenames), a textbox (for the file location) and a button.
Private Sub CommandButton1_Click()Dim vtPid As VariantReDim vtPid(0)Dim i As Integer, j As Integer j = 0 For i = 0 To lstPid.ListCount - 1 If lstPid.Selected(i) = True Then ReDim Preserve vtPid(j) vtPid(j) = lstPid.List(i) j = j + 1 End If NextfrmPidTag.HideCall Modifie_PIDTag(vtPid, txtLocation.Text)End Sub
The code is in my module.First I open the excel (table with 2 columns, old and new tag) and put the table in an array.The array is then used cycle through al entities.
[b] I'm trying to change certain text located in the layer "instrumentation".[/b] It's just text strings, no blocks or anything.
I'd like to use another method to get only the entities with possible matches but this seems to be the only reliable method. Only cycling textstrings would be better.
Sub Modifie_PIDTag(ByVal vtPid As Variant, ByVal varLocation As String)' Create the Excel objectDim oExcel As Excel.ApplicationDim oBook As Excel.WorkbookDim oSheet As Excel.WorksheetDim aryPID()Dim LastRow As IntegerDim LastColumn As Integer' Open existing workbookSet oExcel = CreateObject("Excel.Application")Set oBook = oExcel.Workbooks.Open(varLocation & "EXCELDrawingData.xlsx")'Set oExcel = New Excel.ApplicationoExcel.Visible = False ' Open worksheetSet oSheet = oBook.Worksheets("PIDtag")oSheet.Activate' Read ExcelLastColumn = oSheet.Cells(1, oSheet.Columns.count).End(xlToLeft).ColumnLastRow = oSheet.Cells(oSheet.Rows.count, 1).End(xlUp).RowReDim aryPID(1 To LastRow, 1. [code]....
The get/create autocad object may seem out of place there but it was the only way to solve an error.Calling the subroutine from a form gave me automation errors.
