I wanted to change the text of the image. While changing the image i want that the background should remain the same and i could change only the text is this possible through Photoshop i am using photoshop 7.
View 10 RepliesI have an image, I just need to changethe text in that image without changing anything else.
View 5 Replies View RelatedI am trying to produce a new logo for our business that has a solid Blue cloud image on a transparent background. I need to add text over this but ideally it will show as white over the cloud background but blue when its over the transparent background.
Cant simply change the color of text as its a curved edge its going over. I assume I will need to do some form of punch out but not sure how to start this.
I want to change the size of the image in Gimp to 3957x4429 px (67x75 cm) at a 150dpi (the image we have has a 300 dpi.) When i do this in image - print size it keeps changing the width.
The system is not allowing me to get the picture a few cm larger. Is there any way I can overwrite this?
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
I have inside every text,Mtext contents different text style like Arial_1 , Arial_2.
How i can give all the contents inside one style ? the normal procedure i will enter inside text to enter editing mode and changing text format style one by one. I want it once.
I want to save my routing of entering every text to change its content text style.
(Notice:select all from outside without editing mode will not do the job)
I am having problems with changing the height of the dimension text. I have tried going into the style editor and changing the text height in there and then saving it. The number for the height that I changed stays saved however the actual text height on the drawing does not, not even after I tell it to update.
View 3 Replies View RelatedI am having trouble in changing the color of the bullets without changing the text color. Problem is I cannot select/highlight just the bullet so any new color selected applies to the whole line including bullet and text. I am using DP v 7.
View 8 Replies View Relatedi purchased a template for my website, my template came in PSD Format - now when i load it into photoshop i can edit the test i want to change fairly eazily when i use the T (typing tool) and click on the text i want to edit.
Now, some part when i click on the text i would like to edit allows me to put text in and select colors, fonts and so forth but it does not let me overide the existing text. So i take it this part is not formated correctly or the same as the rest of the template is.
Now i figure i can edit what i want my template to look like in that area i want to change the data but then the old text will remain so i would have to someone earse the old text or something first...
I am a web designer and regularly get sent logos etc from clients. More recently I have been sent a jpg image black and white of a girl with a wedding veil on. There is some handwriting text to the left which is a white colour.
As I dont have access to the original psd file I am trying to find an easy way to change the text colour to a pink the client has chosen.
I am using adobe photoshop cs6 and have tried using the colour swap option under image tab but it just seems to change the colour to gray and not the pink i have selected.
Very difficult to change a font in Photoshop CS6: I select the font then go to the dropdown (either the side panel or the options panel at top; same results) and BEGIN TO scroll down to find the font I want to change to. After a couple seconds, the list pops back up to the top. Usually I cannot scroll past the fonts beginning with M or N before it overrides my scrolling and pops back to the top again, If I can select quickly, I can sometimes nab a different font that starts with a B or C, but hardly ever one I am seeking.
View 3 Replies View RelatedI'm trying 3d text for the 1st time in Photoshop Cs6 Extended. The problem is every time I create new text and and change the colour it's always showing up as black. Nothing I do seems to alter this.
View 10 Replies View RelatedI need to change the name on a drivers license so It matches my maiden name.
View 1 Replies View RelatedCan someone tell me if the following is possible?
I write a line of text. I would now like to select the text field to change the color of the text rather than highlighting the actual text itself. This is because highlighting the text changes the bg color to black over the text you highlight and alters the color of the text (I think it inverts it). Is this possible?
I have a .PSD file that someone made for me before I had Photoshop that I want to edit. I'd like to change the actual text of the image, but can't figure out how to do it. I can change everything about the text layers, except the text It's probably something very easy, but I'm a complete Photoshop newbie. Could it be that I don't have that font installed, or something like that?
View 2 Replies View RelatedI have a series of images that are color photos of a three-dimensional, cream colored object. The objects have clipping paths around them and sit on a dark background. I have some new images that I need to incorporate into the layout, but their color is a different "cast", more gray than the other cream images.
I would like to apply the original color to the new images. It would be best if this could be done in the InDesign document, but if necessary, I can do it in Photoshop.
i have been using fireworks for quite some time and it has done everything i wanted it to but now i have hit a roadblock. i have an image set on a blue background and i want to change background color to a dark grey and i want to completely change the image to a dark green. is there a program in photoshop that will do this for me?
View 1 Replies View RelatedIs there a way of changing the range of colour tones used across an image so that for example I have an image of a yellow rose which is made up of yellow, white an grey tones. I want to change this to pink white and grey tones.
View 2 Replies View Relatedto replace the background colour to another colour in this jpg file.
Everytime I select with the magic wand, the picture is not selected correctly. I am not sure what tolerance level to use. Whether Anti-aliased and Contiguous checkboxes should be checked or not.
I need to remove the text saying "A Innland", but the background isn't quite the same at all points - the further right you go, the lighter it becomes. How would I go on about removing this? The text is ingrained in the picture, it's originally not a Photoshop file with a text layer on top. I am using Photoshop CS6.
View 4 Replies View Relatedwhen writing in a text box whenever using punctuation it always go to the beginning of the sentence. FOR EXAMPLE (?what time is it)i have tried changing the text engine option to East Asian and then restarting photoshop, but when reopening my exisitng work, the problem still remains.However when creating a new document the problem is gone, however i want to resolve the problem with my exisitng document i have been working on.
View 8 Replies View RelatedWhenever I add text to an image, it is set to Times New Roman Automatically and it works fine.
When i try to change the font, or bolden it, add italics or underline my photoshop crashes.
I have tried reinstalling many times, and have also tried using ctrl + alt + shift while relaunching.
So I am attempting to use a black theme on my windows pc. My Creative Suite 2 products use black text in the menus and pop-up dialogues (such as canvas size). Of course, I can no longer read the options. Is there a way to get Adobe products to use the menu fonts defined by windows, or at least to change it within the software?
View 1 Replies View Relatedpicture easily explains this: Not really sure how to search for this?
basically black text changes to white over the layer.
I need to change the width and height of some text i'm inputting to and image so that the height is 100% and the width is 75% in ariel size 11, how do i do it? I cannot find the answer on google,
also, the phrase capitalized, is this some special setting or does it just mean write in capitals
I've been having trouble with this render I've created, in that I'm trying to change the colors on this character's hand from the orange tint that some of his fingers have due to firearm discharge, to a more neutralized color that matches another part of his hand, particularly his lower pinky finger. The reason why is I've changed the original color of the gun he's holding to something darker, and I want his hands to reflect the change in color as well.
I've tried everything from painting over the fingers, clone stamping, adjusting the curves, the shadows, the tones, the highlights, and even adjusting the hue and saturation, yet I'm still not getting the results I desire.
Attached are pictures illustrating what I mean, with circles around the problem areas, and a PSD of what I've tried to accomplish so far.
[URL]........
And again, to clarify, I want to change the colors of the subjects fingers that have an orange glow to them to a more neutral tone and to have them have the same color as the subject's pinky finger, which is also circled in blue.
Is there anyway to change the color of lines in an image? In a graphic image I tried to upload (But it wouldn't do it) I want to keep the background but want to make the lines a sharp white. (they are kind of a grey) Is it possible? (There are only lines and a solid color background)
View 8 Replies View RelatedHow can I change a selection of an images color. Have an image of a red ladybird (see link below) and want to change it to a different color say a blue or a yellow.
View 3 Replies View RelatedI am currently unable to access the color table in the mode image section. It is blank so that I cannot select it...any pointers? Also, I am having a hard time changing the colors on my jpeg image and changing the white part of the image transparent.
View 4 Replies View RelatedTrying to change the blue color in this abstract image (see image) to a much darker green (pantone 561) Any way to do this easily? I am not coming to close to this new darker green color.
View 3 Replies View RelatedI've been having this problem for some time now. I edit my images and save them but the saved copies in their folders are always 1) darker and 2) with less color. However, when I put the images back into photoshop, they look as they did just before I saved them. Does anyone have any ideas on how to fix this or what might be causing it?
Also, when I do a lot of editing in one go, I get a message that I'm running out of memory on my C drive, even though photoshop is installed on my much larger D drive.