Photoshop :: Can Texturiser Filters Be Applied...
Jun 26, 2009
working with fairly small images, 30 x 20 centimeters ...12 x 8 inches... @ 300 dpi...and want to apply the Canvas Texturiser filter over the image. but when i do the texture comes up as a grid-like tiled surface which looks very unprofessional. i have had a bit of a play with the scaling of the effect in the dialogue window but the tiling effect still comes up. can this be over-ridden so the texture i want can be applied to look like one large canvas texture?
View 1 Replies
ADVERTISEMENT
May 23, 2013
I'm new to GIMP. I've used Adobe Photoshop for years an years and no longer have access to the license. So I've been giving GIMP a test drive for a little while. I'm confused as to why when I apply a filter to my image or layer it changes the color to B/W or grayscale? I'm sure this is a relatively easy fix, but most filters I'm using don't have many options and I can't seem to apply the filter "as is". It always changes my whole graphic to grayscale. See "Before & After" attachments.
View 1 Replies
View Related
Sep 22, 2013
I tried opening the images that I applied lightroom filters on, and the images did not change at all, though when I go to lightroom the filters are present. Does that mean that lightroom filters only work inside lightroom? Is there a way to save the photos with the filter(s) applied?
View 4 Replies
View Related
Aug 9, 2012
Ps CS6
OSX 10.6.8
Problem: Transform applied to Smart Object fails to transform an attached Smart Filters Mask.
I mean a Transform, including Free Transform, as found in the Edit menu. A simple move by the Move Tool is OK.
A workaround until this bug is squashed is to encapsulate the Smart Object + Smart Filters + Filter Mask inside another Smart Object and transform that.However, that will not be a satisfactory solution in some cases. If a filter has size parameter(s), e.g. Gaussian Blur radius, a scaling or warping/distorting transform applied after the filter will obviously differ from the filter applied after the transform.
In any case, the workaround is inconvenient to subsequent editing and experimenting with filters and masks.
View 3 Replies
View Related
Jan 31, 2011
I have hardly ever used filters for any of my work as I have preferred using Xara's native tools and effects to get what I wanted. But recently, I was inspired by some animation work which used backgrounds painted in Photoshop. They used a lot of textures which enhanced the look of the animation and so I thought I'd try to simulate it within Xara.
It works very well and I can export it as a PSD retaining the layers and Alpha channel. But here come my questions.
1. How can I remove the two Alien Skin demo plugins as I already have the full versions.
2. Why don't the native Photoshop plugins--Artistic, Sketch, etc.--seem to work?
View 6 Replies
View Related
Jul 22, 2009
In CS3 you could change something to make all filters act like smart filters, even though they won't. I found this worked very well, now I have CS4 and would like to do the same but can't remember what to do to make it work.
View 6 Replies
View Related
May 17, 2009
I just downloaded a bunch of filters and I dragged them into the filters directory under plugins, but when I open photoshop, none of the filters are there.
View 4 Replies
View Related
Nov 5, 2013
I downloaded and installed GIMP 2.8.8 in Windows XP. The Filters menu option shows only Repeat last, Re-show last and Reset all filters.Nothing else in there. Where are the filters?
View 1 Replies
View Related
Mar 9, 2012
I am working on a dormitory project and need to provide a required light and ventilation schedule. I have figured out how to create a schedule for each level, but I want to isolate only the Dormitories and the Kitchenette (weed out all the other rooms such as corridor, elevator, storage, toilets, showers, stairs, trash, electrical, etc.).
I tried using seclusion filters, but there are too many items to exclude and cannot fit them all into the 4 filter categories. I am trying to just get the rooms that begin with 'D' and 'K'. I tried providing the variable 'Begins With' for D and in the next line 'Begins With' K, but then nothing shows up.
Is there a way to provide information to the filter that would allow it to show only rooms beginning with D AND K? I cannot seem to get it to work. I have been playing around with separation values within one filter category (i.e. 'Begins With' D, K) but apparently you cannot add multiple variables within one of the filter items.
View 2 Replies
View Related
Mar 14, 2013
in Ps5, trying to create mist effect - create layer copy,adjust saturation to -100 and lightness to +100, (image turns completely white),select gradient tool, select BandW linear gradient. I drag the pointer from bottom of image to top, but nothing changes - image still completely white, as if the gradient has not been applied.
View 1 Replies
View Related
Nov 2, 2012
Can you remove 3d extrusion once applied in CS6?
I made some nice text, but I would like to remove the 3D without losing the font choices/placement etc..
Is there a way to right-click and delete 3d extrusion?
View 3 Replies
View Related
Jul 1, 2013
After applying a filter to a layer how do you remove it? Currently I have applied color halftone however I want to remove it but can't find how to.
View 1 Replies
View Related
Aug 16, 2011
how to mess with text to make them look like this (collegue need to make translated book cover) I suggested to use Displace but it's tricky...need to find proper background etc. Maybe there is some PS or Illustrator filter or filter group which applied gives such effect?
View 3 Replies
View Related
Mar 30, 2008
I apply a stroke to one or more images which share a common background. I click on the thumbnail image in a given layer, add a new layer in which I stroke the image. This all works as expected, after I apply the stroke I only see the border but not on all four sides? The layers have all been previously aligned and distributed. If I move the image slightly the border becomes visible on all sides, but the images are no longer aligned.
View 2 Replies
View Related
Jul 16, 2008
Everytime I crete a box etc of a shape layer a layer I used previously is being applied to that layer automatically? Can someone help. It has to be a simple thing I am not aware of.
View 1 Replies
View Related
Jun 14, 2009
I am placing a photoshop image into Indesign. It is an image of a Poloroid picture. When I import it into ID the drop shadow is applied to the entire bounding box or image surface area. I'd like to have it applied just to the "element" or Poloroid image instead.I'm saving it as a flattened JPG and placing it into ID.
View 2 Replies
View Related
Sep 9, 2013
Why can't I see an applied effect all the time even while following the same steps every time?
View 5 Replies
View Related
Dec 1, 2012
I just upgraded to PSE 11. The first thing I attepted was to place a caption on some images. The caption does not appear. I attempt again to apply the caption and it is already there in the dialog box but still doesn't appear on the image.
View 10 Replies
View Related
Aug 27, 2012
I've wrapped my head around how to reclaim the stripped-out portion of an image that has been non-destructively cropped in CS6: click the image with the crop tool, or select Reveal All from the Image menu. Short of doing this every time I suspect that I may have cropped an image, is there anything in Photoshop's interface to tell me at a glance if the image has been non-destructively cropped? I guess I could check the document dimensions in the pop-up status display at the bottom of the window, but I'm looking for something more direct that doesn't make me search.
2009 iMac 3.06 GHz Core 2 Duo; OS 10.8.1
View 2 Replies
View Related
Sep 12, 2012
I want to create some typography in Photoshop that will be used to create a web address that will be applied as a watermark to lots of images.
1. After I create the watermark, any easy way to apply it to lots of images? As an action? Something else? Is this easier to do in Lightroom?
2. Any style of typography/color that would convey a Mediterranean villa style?
View 3 Replies
View Related
Feb 12, 2013
Selected area with eliptical lasso to put on new layer, then rotate horizontally. However, all my other layers rotated as well, even when turned off. What did I do wrong?
View 4 Replies
View Related
Aug 9, 2012
Ps CS6
OS X 10.6.8
Problem: Transform applied to Smart Object cannot be repeated on another target.
"Edit > Transform > Again" fails to transform any target after a Transform is applied to a Smart Object.
View 6 Replies
View Related
Oct 7, 2013
Let's say you have two photos - Photo A and Photo B Both Photos are identical in every way, except Photo B had several Color Corrections applied to it. So, in reality, Photo A became Photo B after these Color Corrections were applied.
The question is:
Does Photoshop CS6 have a way to analyze Photo B by comparing it with Photo A, then telling you what Color Corrections were applied, (even if you had not recorded a script)?
View 1 Replies
View Related
Jul 25, 2013
With Photoshop CC, when editing a video and adding a "Camera Raw Filter" to some video layer, the effect will be applied only to one frame and not to the whole video layer.
Should it not add that filter to the whole layer (e.g. all frames in that clip)?
View 3 Replies
View Related
Oct 29, 2013
When I go to open photos - they are opening in blue-green-purple colors as if a filter is being applied. The color pallette is also appearing with the same blue-purple colors. In the layers pallette - the icon of the image appears in the normal colors and no filters, etc. have been applied. It's all starting from when selecting the photo to be opened in photoshop.
View 1 Replies
View Related
May 8, 2013
I am having the darndest time figuring out what I'm not understanding with this, "bug". (I call it a bug because it seems to be one, imo.)
Specs:
Mac OS X 10.75
Creative Suite 5, Photoshop 5.1
"Issues":
If I adjust paragraph settings, like indents, in one file, those options do not return to default when I start a new file. Thus, I find myself wondering why I have such large gaps between lines of copy or to the left, etc. when I start a new text layer. (This actually happens not only in new files, but in new layers - the latter is slightly more understandable in that it's the same file.)
When a lightbuld goes on for me: "Check your type settings." And, lo-and-behold, there things are: space before or after a paragraph; right or left indents. All settings that used to be cleared when a new file - or a new layer - are opened. This is excruciatingly annoying.If I apply a layer style (e.g., drop shadow) to a shape layer, and then I create another shape layer, the latter one automatically gets all the same style settings applied. That is, the new layer has the all the same layer styles applied to it by default. Meaning, I have to then delete those as they are often not what I intend.
In any case, it used to be that I could choose what I want my own new files and layers to look like, not have previously used settings automatically applied.
View 2 Replies
View Related
Feb 27, 2011
I added a uvw map/bitmap image to the material editor. The image shows fine in the material editor but when i apply it to the object which is just a plane it doesn't show it in the viewports.
I clicked on a new material ball, clicked the box next to diffuse, selected bitmap. Opened a jpeg file of the material Im using. It showed uo on the material editor ball. Then when I apply it to my object it just turns grey.
View 1 Replies
View Related
Jun 28, 2011
I'd like the viewports to show only the applied textures without any kind of directional lighting but I just can't figure out how to do that.
I removed all lights so the model was pitch black then tried changing the ambient color in the environment panel but it had no affect.
View 7 Replies
View Related
Apr 16, 2012
I run the CUI command, and use the command search to find an old macro command that I created a while back. I edit the macro in the right-hand pane and then click APPLY, and then OK to exit the CUI. But the changes that I made are not there - when I run the command in AutoCAD, it executes the old version of the macro.
So I tried it again, only this time I exited out of AutoCAD and re-launched. Still nothing.
This is very strange, because I've been composing and editing macros (attached to toolbar buttons) with CUI for years, and this is the first time I've ever had this problem. But it is worth noting that this is the first time I've tried to do this in our current version of ACAD, which is 2012 vanilla.
View 1 Replies
View Related
Dec 15, 2012
I notice a rather strange behaviour in Lightroom 4.3 in the Develop module: it appears that the Develop preview ("zoom to fit" setting, I guess that's what 99% of people are using when using the global adjustments) is only updated when moving the mouse pointer AWAY from the slider that controls the adjustment (it doesn't matter if it's Clarity, or Highlights, Shadows, whatever).
I happen to often click somewhere on the sliders range, say somewhere in the middle between 0 and +100, to get an idea what a Clarity ~50 might look like. If I keep the mouse pointer hovering over the knob, the Develop preview will look pixelized/blocky, and not update to a more refined preview.
Only if I move the mouse pointer AWAY, the preview will be updated. It's as if the rendering is delayed until you're really sure you want that setting, perhaps to improve responsiveness/performance? This didn't happen in LR 4.2.
I tried this with a NEW catalog and only imported something like 100 photos to it, and no plugins - the behavior stays the same. I uninstalled the latest AMD/Catalyst graphics driver and let Windows 7 (64bit) "fall back" to a default driver - again, behavior stays the same.
View 27 Replies
View Related
Dec 30, 2012
This really doesn't qualify as a tutorial, rather it's a reminder that various effects (including distortions) can be applied to masks to achieve interesting results.
Take this somewhat boring publicity photo, for example:
Uploaded with ImageShack.us
1. Make an elliptical selection, re-position it as necessary, and feather it by 20px.
2. Create a mask from that selection:
Uploaded with ImageShack.us
3. Apply Effects...Texture Effects...Polished Stone to the mask with these settings:
Uploaded with ImageShack.us
4. Apply Effects...Distortion Effects...Ripple to the mask with these settings:
Uploaded with ImageShack.us
The final image:
Uploaded with ImageShack.us
The combination of the polished stone and ripple effects works nicely here, since the final effect is similar to the loose strands of her hair style.
I used the KPT Collection's KPT Noize effect to create a nebulous background and added a yellow-to-blue gradient layer above it (set to "Multiply" mode); and a bevel layer style to the text, reducing the kerning after the capital J's to -50. I also applied the Smart Photo Fix to the original photo, reducing the brightness slightly.
The layers look like this:
Uploaded with ImageShack.us
View 14 Replies
View Related
