So this time, PS can't open a .avi movie file. I already installed the latest version of Quicktime(7.1) but it still won't open. It says, "Could not complete to open command Video frames to Layers command because movie file cannot be opened." My video, is like 500kb-1mb.. or like 3-10 seconds long
View 8 Replies
I'm trying to make an animated gif.
I've tried several ways, but with no results.
If I drag the .mov file to the CS5 app, I get the message: "Could not complete your request because Photoshopdoes not recognize this type of file."
If I try to open from CS5, it does not "see" it as a readable file it can open.
If I try to open from Bridge, it does not list CS5 as an app that will open it.
Using 10.7.4, 2x2.66 GHz 6-core Intel Xeon, with 27GB of DDR3.
Repaired permissions prior to all this.
what is the different between a movie file (.wmv) and a PDF file (.pdf)
View 3 Replies View RelatedNeed a plug in to output movie filed from slide at a maximum size of 1400x1050.
Where is one to be found?
With prior versions of VideoStudeo I could create a movie and write it to a folder instead of a desk. I used this to preview movies before burning them. How to do this in X3. Neither DVD Factory nor Burn have this option.
View 6 Replies View Relatedcan I strip audio out of movie file in LR
View 4 Replies View RelatedI currently use X4, but have X5 ready to install. I shoot with a Canon M41 in the lower quality selection of HD. The file is AVCHD with about 16 mbps. The best HD is 24 mbps. I use the lower because with the software included with the camera, creating an AVCHD disk is limited to the lower standard and shooting in the higher standard required considerable time to down render the files to create the AVCHD disk. Camera Manual indicates 60i or 30p. Confused on this issue. When I create a movie in X4, I selected Blu-ray 1920P. This seems to introduce some slight artifacts like moving, fine horizontal lines and some strange flick of some objects like flower fields. Converting to an AVCHD disk takes several hours for a 25 minute movie consisting of 3 shorter movies. Also, the artifact effect is increased. I just did a trial of creating the movies in "same file type as first clip". The resulting file is about 15% smaller. Also, rendering an AVCHD disk is quicker and no artifacts. Am I on the right track? The software included with camera created excellent quality videos but was camera specific and very limited in adjustments, etc. Corel could provide more info about the confusing file types.
Also, X4 will crash with "unknown error caused program to stop". I save frequently to return to where I was editing. Doesn't seem to be a consistent answer on this issue. I hope X5 is more stable.
Vista Home Premium
4 Gig Ram
AMD Phenom 9500, quad core
ATI HD2400XT
I have converted my finished movie project into .flv format to be exported to a directory on my hard drive. I am not having any success with getting it done. How to move this movie file to my computer hard drive?
View 7 Replies View RelatedI have VideoStudio Pro X3 and when I try to insert movie clips I get a "File Mismatch" message. My clips are created from a smart phone - Samsung Fascinate - and are of .MP4 format.
View 5 Replies View RelatedI am trying to reduce the file size on a large number of jpeg photo's for unsertion into Windows Movie Maker. How do I compress the slides in a batch job? Can I do it in Photoshop Elements?
View 1 Replies View RelatedI have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies View RelatedI am unable to open files from the file "OPEN". I can open from Bridge or open recent document, but not from just File, Open.
My operating system is Mac OS X.
When I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C: drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
I first had to give the user that I was logged on with write permissions to the root of the C: drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.
Everything I read says its version 6.4, but when I attempt to run the 6.4 patch I get the message that it does not apply? Has Adobe prevented PSE7 from opening .NEF files from the D5100 (without conversion) in an effort to force paid upgrades to the current PSE version?
View 4 Replies View RelatedI am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. try out the new features of CS6 for video editing.
I am running a 27" iMac with 12gb RAM and 1gb of Video RAM.
Getting this error when trying to use downloaded ACTIONS. "Could not place the document ‘Photoshop_Actions_03_by_ReehBR.atn’ because no parser or file format can open the file."
View 2 Replies View RelatedIn Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies View RelatedHow can I import the contents of an image file into an already open file? I want to import the WHOLE image, not just a cropped version.
View 1 Replies View RelatedI am able to run CS6 when I login Admin, so i change scratch file location to D:. After restarting PC, login by Admin, I can run CS6. But I still can't run CS6 when I login by other account, I think the location of scratch file is per user setting.
View 3 Replies View Relatedmy setup has 128gb ssd (C) which contains only my OS files with some junction points to Program Files/Program Files(x86)/ProgramData/Users which are located in my D drive which is a 1TB WD.
at first it showed when I tried to start PS for the first time after a clean install on a new computer I managed to get past it by runing PS as admin and changing the scratch disk to D.but now I noticed that when I try to copy a path from illustrator into photoshop as either a smart object or as pixels I get this error again. I haven't seen it again other then that but I just started using PS in this setup so I am yet to explore all the functions and whether they are working correctly or not.
when ran as an administrator the illustrator->PS transfer works fine but I don't want to run PS as admin all the time...
When I from Photoshop CS6 chose to open a file, or "Place" the browser window open, but I have to scroll all the way down in the "Enable:" drop down menu to chose "All Documents" or "All readable Documents" each time. And then if I want chose from the "Format" menu.
This is very time consuming, and I don't find any settings to make i.e. "All Documents" as default.
I have Photoshop CS3. it was working perfectly. Today both the File > New and File > Open do nothing. Dragging a photoshop file onto the program does not open it. Creating a new document brings up the dialogue but clicking ok does not create a new document. Nothing happens.
View 1 Replies View RelatedI'm working with both Photoshop and Illustrator CS6 on a mac. I'm creating a graphic. The background is a (cartoonish) mouth and I finished it a couple of days ago. (It's an Illustrator file.) I've been working on the letters to go inside of the mouth, (Once I'm finished it'll look as though they're being crushed.) I scanned and edited small wooden letters in Photoshop, and now I would like to work with them with the background in Illustrator. I understand how to open a Photoshop file in Illustrator, but I don't want to open the document as a separate Illustrator file. Is there a way to open a file from Photoshop as a second layer?
Some of the letters repeat as well. Will I have to create two files for this, or can I open the same file twice?
When I open a RAW file in the Develop module ACR dsoes not open. What am I doing wrong?
View 3 Replies View RelatedI have an open file - we'll call it the 1st file. I will add a background and some other images to it that are located in other psd files. But how? How do I get them in there?
I want to add 2 images, (don't worry about getting into selection and pixels, shadows, edges, etc. the complex stuff is easy LOL) Anyhow, I have another file that I open. How do I get that entire image(or file) into the 1st file - into it's own layer - so I can edit, position, and transform it etc. as I need.
make sense?
What if there's a 3rd image/file that I want to open and add to yet another layer.
Do I simply select the entire image and copy/paste it? I tried dragging it, knowing that would probably be futile. Anyhow, any and ALL advice on this surely simple procedure would be appreciated.
There are some files with at least 8 files that I want to bring together into one image. Same thing, do I cut and paste them, or is there another way?
All of these are psd files, btw. Would it make a difference if one was different, say a jpeg or tiff etc.
ive seen the new AVP movie in theaters....i like the "AVP" text that they made for the movie....could i make this text inside photoshop...ive learned a lot about photoshop but ive got a lot to learn yet could someone giv me a quick tutorial...heh heh.....about making special effects for text....cuz thers no font that is like that (AVP) is ther?
View 8 Replies View Relatedhow can I take a movie clip and change it to gif file..?
View 2 Replies View RelatedHow do people take a movie clip and turn it into a GIF?
Do you have to just take a ton of screen shots.
I want to create the movie star glow. Take lines out and make the face younger. How can I do this without buying Portrait Professional.
View 12 Replies View Relatedto get that blue glow of a movie theater to actually appear real? specific colors or tricks?
Ive been playing with lighting effects mostly, something else that I might not have stumbled upon yet?
I'm a casual PS user and there is a look that I have seen that I like, that I would like to use on my next project.
guessing it's a special filter or plugin....
